ADDITION ALTERATION AND RENOVATION TO BLDG NO T11 OR LIVING T41A T42A COOK HOUSE DINING HALL ALONGWITH ALLIED WORKS PATHWAY AND DRAIN AT JAK LI RTC DHANSAL UNDER GE ARMY DHAR ROAD. Job No Z LBW48 2024-25 and Z LBW49 2024 25

Amount

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified.

Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specified.

Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces with using integral waterproofing compound including finishing the surface even and smooth without using extra cement complete all as specified. (supply only of W P C shall be measured and paid separately).

Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed

Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound.

M & L for preparation of old plasterd surface of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of 100% required shade (Company Depot tinted) in with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.50 litre/10 sqm over new surfaces complete all as specified and directed.

Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified.

Preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified.

M&L Sand filling under floors or in foundations including watering and consolidation Complete all as specified and directed

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M & L for PCC nominal mix M15 (1:2:4) type B0 using 12.5 mm graded coarse stone aggregate as in mass concreting complete all as specified and directed.

Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 20 mm thick in CM 1:6 complete all as specified and directed

Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 10 mm thick in CM 1:3 complete all as specified and directed

M&L for PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.

Non skid coloured joint free ceramic tiles 300x300 and 6-7mm thick in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified.

Glazed ceramic tile 450X 350X 7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified and directed.

20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed

20-25 mm thick machine cut kota stone slab as in skirting/dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick plaster in cement and sand mortar 1:4 complete all as specified and as directed. (Length of Kota Stone slab shall be to match the size of stone slab in flooring and the width as directed.

M &L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specifed and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for.

Dismantling of plain & corrugated steel sheeting any gauge, thickness including Nanital or similar pattern roof covering like ridges, hips, valleys and flashings etc complete all as specified.

Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or incl butt welded tubes conforming to IS 1161-1998 grade St-240 and painted one shop coat of zinc chromate promer paint (incl preparation of surface) at contractor's workshop before fabrication complete all as specifed and directed.

Mild steel rolled section as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc. confirming to grade Fe-290. Gde- E-165. complete all as specifed and directed.

S&F pre-painted galvalum aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour tensile strength of 550mpa as in roof covering/cladding to wall, fixed with self tapping screws as a specified.

S&F pre-painted galvalum aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering/cladding to wall, fixed with self tapping screws as a specified.

Dismantling of wall and ceiling board (fibre, pulp insulation etc) for insulation board/slab/blankets any thickness incl cover fillet.

Aluminium anodised snap grid frame work of size 605 x 605 mm for false ceiling including necessary notching. The snap grid shall consist of aluminium anodised main and cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/Rm and 23.5 x 26.4 x 1.4 mm weighing 0.191 Kg/Rm respectively. The main and cross tee shall be jointed at junction crossing with aluminium anodized angle bracket of size 15 x 15 x1.5 mm weighing 0.12 Kg/Rm fixed with suitable MS bolts, nuts and washers. The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 40 x 25 x 2 mm weighing 0.36 Kg/Rm fixed to wall with suitable arrangement and providing 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 sqm and not exceeding 4.00 sqm each and removing from site complete all as specified.

Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified.

PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified.

PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified.

35mm thick, 2nd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.

35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.

Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified.

S & F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

Mild steel framed work as in grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-290. Gde- E-165. complete all as specified.

Factory made steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and as directed.

Factory made steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay complete without glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and as directed.

Steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and as directed.

Preparation of new steel surfaces of any description exc 10 cm width or girth, priming with red oxide primer and painting with two coats of synthetic enamel paint complete all as specified and directed.

Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified.

250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.

200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.

150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.

Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified.

300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified.

S & F Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.

03 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for refixing or removal complete all as specified.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc including cleaning for refixing or removal complete all as specified.

S & F steel water tubes 15 mm bore (concealed), medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F steel water tubes 20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for dismantling of water tank of capacity exc 500 and not exc. 1000 litres and removing to store and supply and fixing of 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White with screwed lid

Demolition of cement concrete is reinforced roofs, floors (other than ground floors) beams staircases, manhole covers, landing chhajjas and similar suspended wk (reinforcement cut as requited to facilitate demolition) complete all as specified and directed.

M&L pre cast cover RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slab set in cement mortar (1:6) including formwork all as specified and directed.

M&L Mild steel TMT bars 6mm to 8mm dia and over (and flat iron where quered),cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips or welded to flat iron complete all as specified and directed.

S & F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified.

S&F grating round 125mm size of PTMT fixed with cement motar.(Min weight 40 gms)

Gate valves, with iron wheel head, screwed both ends for bore of 15 mm pipe and supply and fixed in repairs.

S & F 20 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min weight 210 gms) of approved make complete all as specified and directed

S & F in bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified & directed.

S & F 15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F stop valve, 15 mm bore dia cast copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified & directed.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm long complete all as specified and directed.

S & F in repair Grating doom 100 mm dia of PTMT (Min weight 25 gms) complete all as specified and directed

S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified.

PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified.

Flush pipe of polyethylene of low or high density, 32 mm dia for low level cistern including taking down old pipe, complete all as specified.

Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe fixed in repairs (excluding flushing cistern, flush pipe and waste pipe) all as specified.

Vitreous china wash basin, white, flat back, size 630x450mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., fixed in repairs complete all as specified.

Dismanling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required

S/F 100mm span cast iron soil, waste and vent pipes in any length with or without ears with cement joints aid in trenches or in floors complete all as specified and directed complete all as specified and dircted.

S & F 100 mm bore of pipe cast iron cowls complete all as specified and directed

S/F 75mm cast iron soil, wast and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed complete all as specified and dircted.

M&L for dia of outlet 75mm cast iron floor trap, with grating including jointed to waste pipe fixed with cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate with cement joint, complete all as specified and direted

S&F 75mm bore of cast iron pipe bends(any radius), diminshing pieces or tapers complete all as specified and directed

S&F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work confirming to Fe 290 Gde E 165 complete

S&F expanded metal (exc 4 Kg per sqm), cut to length, bent to shape reqd and tying with and incl annealed MS wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members

M&L for preparation of steel surfaces of any description, over 10cm in width or girth not otherwise described and two coats synthetic enamel paint over red oxide primer complete

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms , moulds, mitred/stopped ends etc.

M&L for plain cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in coping, including necessary form work and finished exposed surface of concrete all as specified.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc., or for shafts, wells, cesspits, manholes, pier holes etc., not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed

M & L for cement concrete 1 : 4 : 8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

M & L for cement concrete 1 : 3 : 6 type C-2 using 40 mm graded stone aggregate as in benching/surface channels etc complete all as specified and directed.

M & L for cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in coping for manhole incl weathering slightly rounded or chamferred angles complete all as specified and directed

M & L for providing precast cement concrete type B1, 1 : 2 : 4 (20 mm graded aggregate) as in cover slabs (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed

Removing excavated material (soils) not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed

M & L for 150 mm bore of pipe in concrete bed to drain pipes including including forming cradles in cement concrete 1:4:8 type D-2 complete all as specified and directed

S & F reinforced concrete pipes 150 mm dia bore, class NP2, laid and jointed complete with collars etc all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exc. 15 cm thickness ( below or above ground level) complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair complete all as specified and directed.

M & L for 25mm thick sand cushioning for laying of paver blocks complete all as specified and directed.

M&L for machine pressed gloosy finish cement concrete chequered tiles of size 300x300x25mm, jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of fills complete all as specified and directed.

S & F Factory made, Machine pressed precast concrete interlocking paver block any shape and size approved by EIC, ISI marked (IS:15658-2006) of 60 mm thick, M-35 grade (medium Traffic), with grey cement & pigment, complete all as specified and directed.

Taking down carefully aluminium/copper point wiring (light, fan, socket or power ) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc, removing materials to store, or keeping in safe custody for offering credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

T/D old unserviceable submain wiring any size 4/6 Sq mm 02 run copper conductor single phase with earth wire including PVC conduit

T/D old unserviceable MCB DBs any type SPN/TPN incl MCBs

Material and labour for Point wiring complete (for simple and modular type ) with 1.5 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through existing PVC non metalic PVC conduit heavy duty not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal modular sunken box 1.2mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., for the following:-

All as per item ser No 107 above but for One light / Exhaust Fan/Ceiling fan point controlled by one switch.

All as per item ser No 107 above but for One switch socket outlet point 3 pin 5 Amps on Independent board.

All as per item ser No 107 above but for One switch socket outlet point 3 pin 5 Amps on same board.

Material and labour for Point wiring complete with 2 run of 2.5 sqmm single core PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade with multistranded copper conductor drawn through existing PVC non metalic conduit with all accessories like tee, straight joint, L Bend etc., concealed on wall surface on ceiling / roofs etc., and including provision of PVC insulated heavy duty ISI Marked unsheathed copper conductor 2.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.2mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches/socket outlets 15 Amps.

Material and labour as in replacement for sub main wiring with two single core PVC insulated unsheathed copper conductor cable 6 sqmm drawing in and including rigid non metalic PVC heavy duty 25 mm dia conduit concealed on wall/surface on ceiling with one additional PVC wire of copper conductor of 6 sqmm for earth continuity conductor incl taking down old Unsv submain any type and size and making good the disturbed surface complete all as specified and directed by EIC.

S&F as in replacement bracket holder/ Angle lamp holder fixed on wall /ceiling all as approved and directed by Engineer-in-charge.

Supply and fixing Switch , single pole, one way 5 Amp 230 Volt ISI Mark complete all as specified and directed

Supply and fixing socket outlet 2 in 1 type , 6/16 Amp , 230 volt ISI Mark complete all as specified and directed

Supply and fixing switch , single pole, one way 16 Amp 230 volt ISI Mark complete all as specified and directed

Supply & replace LED 9 Watt lamp , 240 Volt, 50 Hz lamp

Supply and Fixing as in replacement LED 20 Watt light fitting Baton integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories all as specified and directed by Engr-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and Fixing as in replacement LED 10 Watt light fitting mirror type Baton integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories all as specified and directed by Engr-in-Charge.

Supply and fixing as in replacement of building security LED fitting upto 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection incl taking down complete all as directed by EIC

S&F as in replacement 1.5m long 25mm bore light grade GI pipe bracket duly cut to size and bent to shape required duly painted with 2 coats of synthetic enamel paint (of approved tint) over a coat of red oxide primer, including suitable 2 Nos. FI clamps as required to fix on concrete / steel poles incl taking old unsve GI bracket any type and size complete all as specified and as directed

M & L for sub main wiring with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 6 Sqmm FRLS PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments including PVC conduit and draw in PVC rigid conduit 25 mm dia , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire flexible (Multistrand) of FRLS PVC insulated and PVC conduit 25 mm dia shall be measured and paid as one unit length

Supply and fixing VTPN Distribution Box double door of protection grade IP 42, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way,vertical incl MCCB 4 pole 160 Amp ,16 KA breaking capacity , including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed by Engineer-in-charge.

S & F as in replacement ceiling rose Ceiling rose, 3 phase / PVC / polycarbonate, isolated body all as specified and directed.

Supply and fix as in replacement fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, all as specified and as directed.

Supply and fixing as in replacement socket outlet 5 Amp 230 volt ISI Mark complete all as specified and directed

Supply and fixing as in replacement Switch , single pole, one way 5 Amp 230 Volt ISI Mark complete all as specified and directed

Supply and fixing as in replacement socket outlet 16 Amp 230 volt ISI Mark complete all as specified and directed

Supply and fixing as in replacement switch , single pole, one way 16 Amp 230 volt ISI Mark complete all as specified and directed

Supply & fix exhaust fans AC single phase 230/ 240 V of size 450 mm sweep with louver

Supply and fixing ceiling fans BLDC motor (Brushless direct current motor complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery not less than 210 cubic meter per min, B star rating 3 power consumption not more than 35 W, RPM not less than 340 complete all as specified and directed.

Supply & Fixing as in replacement of VTPN DB 4 Way distribution Box, double door of protection grade IP 42 in fine powder coated, CRCA sheet, fitted with shrouded neutral, insulated pin type bus bar, Din rail, earth bar suitable to house 100 A 4 Pole 16 KA MCCB complete confirming to IS 13032 & 8623 incl taking down old UNSV TPN DB any type and size complete all as specified and directed. Note: MCCB 4 Pole 100 A shall be measured and paid separately under relevant items.

Supply & Fixing as in replacement of SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, confirming to IS 13032 & 8623 incl taking down old UNSV SPN DB any type and size complete all as specified and directed.

Supply & Fixing as in replacement of SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, confirming to IS 13032 & 8623 incl taking down old UNSV SPN DB any type and size complete all as specified and directed.

Supply & Fixing as in replacement of MCB SPN, 40 to 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fixing as in replacement of MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fixing as in replacement of MCCB 4 Pole 100 Amps 440 volts, AC , 16 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

M&L as in replacement for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated (BLDC)

Supply and fix Water heater storage type, electric,capacity 50 litres.BEE 5 star rated

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour (or nearest size).(Steel body)

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoued, electric power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 Core.

Deduct Schedule of Credit of Rs. (-) 163827.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

SINGH CONST CO (BID ID -3277325)

MAHADEV ENTERPRISES (BID ID -3281420)

M/S SHUBAM ENGINEERS (BID ID -3283667)

MandeepConstructionCo (BID ID -3279256)

M/s Ranpat Dev Infrastructure pvt ltd (BID ID -3279709)

M/S SANJAY STEEL WORKS (BID ID -3279651)

M/s Khajuria Construction Co. (BID ID -3279964)

M/S. RAM PAUL KHAJURIA & BROS. (BID ID -3279566)