Tahasil office building at Jagannathprasad_building

Flyash Brick masonary in cement mortar (1:6) in superstructure by using 9" size K.B.Bricks including all cost, conveyance etc. complete.

Cement Concrete (1:3:6) by using 4cm. Size B.H.G. metal including cost, conveyance etc. complete.

Removing old grading plaster from roof slab, cleaning the surface, lowering and removing the debries within 50 m. lead.

2.5 cm. thick grading concrete (1:2:2) on roof slab with 6mm. size hard granite chips on new work.

Supplying and fitting fixing of Un-plasticised poly Vinyle Chloride (UPVC) (FENESTA/NCL VEKA LTD) Two Track - Two Panel Sliding Window Casement window with top fixed 60 series duly manufactured using UPVC reinforced profile PVC reinforced profile of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.25mm capable of mounting single glazing system, structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefebricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear thoughened glass of SAINT GOBAIN make duly fixed with EPDM wheathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials accessories labour charges materials and product conforming to ASDMD 638-14/EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge.

Supplying and fitting fixing of Un-plastricised poly Vinyle Chloride (UPVC) (FENESTA/NCL VEKA LTD) Casement Door 60 series duly manufactured using UPVC reinforced profile of 60mm x 55mm x 2.5mm for outer framEs, 102mm x 60mm x 2.25 mm for casement door sash profile and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefebricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM wheathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes in system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials, accessories, labour charges materials and product conforming to ASDMD 638-14-EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge.

16mm. Cement Plaster in C.M. (1:6) over Brick work including all cost, conveyance, labour, etc., required for the work complete as directed by the E.I.C.

12mm. Thick Cement Plaster in C.M. (1:6) including all cost, conveyance, labour, etc., required for the work complete as directed by the E.I.C.

Providing fitting and fixing of Gypsum board(12.5mm thick of size 6'x4' size) celling with Aluminium anodised T section No. 3215 with 2'0"center to center, L Section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC supended from celling etc complete.

Finishing Plasters surfaces of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, charges with cost of all materials taxes, labour T&P etc., complete.