REPAIR/MAINT OF WORK TO CERTAIN BUILDING WORKS AND CAMOUFLAGE PAINTING IN ZONE-A IN JAISALMER AND CHANDAN AT AIR FORCE STATION JAISALMER

Amount

M&L for 15mm thick plaster in cement (1:4) on other than fair face of brick work or concrete surfaces or stone masonry surfaces of wall, finished even and smooth without using extra cement including taking down old cement plaster complete all as specified.

M&L for 15mm thick plaster in cement (1:6) on fair face of brick work or concrete surfaces or stone masonry surfaces of wall, finished even and smooth without using extra cement including taking down old cement plaster complete all as specified.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant priming on surfaces of walls any colour as approved complete all as specified.

M&L for preparation of newly plastered surfaces or unplastered surfase of walls and applying two coats of distemper oil emullsion over a coat of chalk whitening complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of cement based paint in different tints on walls as approved GE complete all as specified and directed.

M&L for preparation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying two coat of cement based paint in different tints on walls as approved complete all as specified and directed.

M&L for preparation of old decorated or unplastered surfaces of brooming down and steel wire brushing, scapping down smoke soot, moulds, moss and efflorescent salts and grasy spot etc and applying one coat of white wash of wall complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated or unplastered surfaces of brooming down and steel wire brushing, scapping down smoke soot, moulds, moss and efflorescent salts and grasy spot etc and applying one coat of white wash of ceiling complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated wall surfaces of any description and applying one coat of oil emulsion distemper of any tint etc complete complete all as specified and directed by Engr-in-charge.

M&L for preparation of old decorated wall surfaces of any description and applying two coat of oil emulsion distemper of any tint etc complete all as specified and directed by Engr-in-charge.

M&L for preparation of old decorated ceiling surfaces of any description and applying one coat of oil emulsion distemper of any tint etc complete all as specified and directed by Engr-in-charge.

M&L for preparation of old treated/ decorated wall/floor surfaces of any description by brooming down or steel wire brushing, scrapping down smoke soot and greasy spots and applying one coat of exterior emulsion paint (Apex) (VVIP areas) 1st quality in different tints/shades pattern any colour as approved by GE complete all as specified & as directed.

M&L for preparation of old treated/ decorated wall/floor surfaces of any description by brooming down or steel wire brushing, scrapping down smoke soot and greasy spots and applying two coat of exterior emulsion paint (Apex) (VVIP areas) 1st quality in different tints/shades pattern any colour as approved by GE complete all as specified & as directed.

M&L for preparation of old decorated wall or unplastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot and greasy spots and applying one coat of exterior emulsion paint (Apex) on surfaces of walls (height above 9.00mtr) 1st quality in different tints/shades pattern any colour as approved by GE complete all as specified & as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint any colour as approved complete all as specified and directed

M&L preparation of old painted steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint any colour as approved complete all as specified and directed

M&L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 15cm high and 2.5cm width with thick synthetic enamel paint of approved tint over and including one base coat of synthetic enamel paint on plaster or concrete surfaces for writing of letters complete all as specified and directed. Make : Berger/Johnson & Nicholson/Asian/Shalimar, 1st quality

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-0 using 12.5mm graded stone aggregate in chajjas and the like and complete all as specified. Note:- Reinforcement & formwork shall be measured and paid for separately.

Formwork to flat surfaces of chajjas, chullah hoods, troughs and similar items including edges for rough finished and including necessary struts surfaces complete all as specified.

M&L for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 8mm dia rebar using HY-200 chemical from HILITI or equivalent including drilling hole of required size in RCC beam/lintel complete all as specified and as directed by Engr-in-charge.

M&L for rendering 5mm thick on fair faces of concrete surfaces in ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster or cement lime plaster of any discription on brick or stone walls or ceiling including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces or unplastered surfase of ceiling and applying two coats of distemper oil emulsion and including a coat of chalk whitening complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick sheet glass ordinary quality and not exceeding 0.50 sqm in each pane and including Hacking out broken glass (any thickness, size, quality or description) from wooden/steel and inclduing glazing with oil putty or fixed with beads and fixing new ones complete all as specified and directed.

S&F 3mm thick frosted sheet glass ordinary quality and not exceeding 0.50 sqm in each pane and including Hacking out broken glass (any thickness, size, quality or description) from wooden/steel and inclduing glazing with oil putty or fixed with beads and fixing new ones complete all as specified and directed.

S&F in replacement of galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples including wooden beading etc complete all as specified and directed.

M&L for removing of rust from existing steel surfaces with rust removers of SIKA Rustoff 100 applied in two coats @ 0.15 Ltr/Sqm per coat and cleaning all rust with steel wire brush and washed with water complete all as specified and directed by Engr-in-Charge. Make: SIKA/BASF/FOSROC.

M&L for application of anti corressive coating with SIKA Rustoff friazinc on the exposed reinforcement proper mix applied @ 0.25 Ltr/Sqm of exposed steel surface as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge. Make: SIKA/BASF/FOSROC.

M&L for application of epoxy resin bonding agent with sikadur 32LP @ 0.5 Ltr/Sqm over old concrete surface complete all as specified and directed. Make: SIKA/BASF/FOSROC

M&L for applying concrete curing agent by brush/spray on concrete surface @ 0.50 Ltr/Sqm with Make SIKA Antisol EWP or equivalent complete all as specified and directed by Engr-in-Charge. Make: SIKA/BASF/FOSROC.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work not exceeding 15cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and directed

Demolition of unreinforced cement concrete as in roofs, floors, (other than ground floors), beams, staircases, landing, chajjas, sunken portion of slab and similar suspended work complete all as specified and directed

Demolition of cement concrete wall and pavings not exceeding 15cm thickness (below or above ground level) unreinforced complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base/leveling course and flooring complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring/hard standing/paving finishing cement concrete surface fair and even complete all as specified and directed.

S&F coloured anti skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc over and including 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

S&F coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc over and including 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

S&F coloured glazed ceramic tiles in dado/skirting 450x300x7mm thick on vertical surfaces, dado and skirting over and including 10mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved) on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and complete to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 40mm bore as in spout and including taking up or down old unserviceable steel water tubing complete all as specified and directed.

S&F in replacement of vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic PVC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified & as directed.

S&F in replacement of vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including jointing and making good to floor provision of PCC 1:5:10 bed as in repairs complete all as specified and directed.

S&F in replacement of 10 litres capacity PVC valve less syphonic action type, high/low level flushing cistern, white with inlet, ball valve float and handle fixed to wall with backet and screwed including PVC flush pipe complete all as specified and directed.

M&L for cutting holes into or through brick/stone masonry wall built in cement mortar and making good in cement mortar 1:3 or PCC 1:2:4 type B-0 as required for superficial area exceeding 400 sqcm but not exceeding 0.16 sqm complete all as specified and directed

S&F in replacement of PVC (SWR) floor trap dia of outlet 75mm, with grating including jointing with solvent cement for trap complete all as specified and directed.

S&F in replacement of PVC (SWR) floor trap dia of outlet 100mm, with grating including jointing with solvent cement for trap complete all as specified and directed.

Supply and fixing in replacement of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable clamps or laid in floor making good as existing complete all as specified.

Supply and fixing in replacement of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable clamps or laid in floor making good as existing complete all as specified.

Fixing only 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable clamps and including taking down complete all as specified.

S&F in replacement of 110mm bore PVC (SWR) bend any radius provided with access door.

S&F in replacement of 75mm bore PVC (SWR) bend any radius provided with access door.

S&F in replacement of 110mm bore PVC (SWR) Junction single (Single T) equal or unequal provided with access door.

S&F in replacement of 75mm bore PVC (SWR) Junction single (Single T) equal or unequal provided with access door.

S&F in replacement of 110mm bore PVC (SWR) bend any radius provided

S&F in replacement of 75mm bore PVC (SWR) bend any radius provided

Supply and fixing as in replacement of 100mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches or floors complete all as specified and directed.

S&F 100mm bore cast iron Sockets (double) collars.

S&F as in repairs 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified & as directed.

S&F in repairs 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.

Supply and fixing Cast Iron cowl for 100mm bore CI pipe complete all as specified and directed.

M&L for taking down chowkhats with shutters (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each and including cutting holes in stone/brick/concrete block walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, exceeding one brick & not exceeding two bricks (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) complete all as specified and directed.

M&L for taking down chowkhats with shutters (without taking off shutter from the frame) not exceeding 1.5 sqm each and including cutting holes in stone/brick/concrete block walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, exceeding one brick & not exceeding two bricks (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) complete all as specified and directed.

Taking down shutters any discription area exceeding 1.00 sqm each but not exceeding 2 sqm each complete all as specified.

S&F Second class hard wood plain, solid sraight door chowkats and frames, wrought including transoms or mullions, framed rebatted on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed by Engineer-in -Charge

S&F Factory made Second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I.

Supply and fixing factory made 35mm thick second class hard wood plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class hard wood rail and styles, fixed to chowkat, complete all as specified & directed.

S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F mild steel for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, conforming to Fe-410-W (Gde-E-250) quality-B, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete including necessary welding etc and fixing in position complete all as specified.

S&F mild steel flat as in hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

Supply and fixing 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

Supply & fixing butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified.

S&F extruded aluminium alloy handle, D type, 150mm size, fabricated type, anodized (ISI marked) complete all as specified.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150mm complete all as specified.

S&F steel windows with side hung shutters including box type hinge of size 50mm with 'z' type steel handle and steel peg stay and 02 No.100 mm size MS tower bolts welded on each shutter complete with glazing bars, dovetailed or welded all as specified and directed.

S&F steel windows with side hung shutters including box type hinge of size 50mm with 'z' type steel handle and steel peg stay and 02 No.100 mm size MS tower bolts welded on each shutter complete without glazing bars, dovetailed or welded all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

M&L for prepariation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Chimney bars (straight or camber), bearing bars, tongues or water bars for window frames, window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 and including dismentling mild stee work complete all as specified.

Dadhich Engineers