Construction of 2 Rooms and Toilet Block at Govt Senior Secondary School Sach (SH Construction of One Room in First floor

Amount

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, in all work above plinth level up to floor V level using minimum cement content not less than 360 KG/Cum including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Steel reinforcement for R.C.C. work of TATA Tiscon/Sail 15342.80 including straightening, cutting, bending, placing in position and binding all complete upto plinth level as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Second class brick work using common brunt clay building bricks of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) curing complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 35 mm ( thirty five millimetre) thick flush door shutters OF ISI approved core of black board construction with frame of first class hard wood and well matched firtst class Indian teak ply veneering with vertical grains of cross band and face vaneers on one face and commercial ply veneering with vertical grains of cross band on other face of shutters as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fxing water proof treatment resistant plywood ISI marked IS No. 1659 of uniply/Green ply shutter i/c vertical portion & shelve with complete box . The side of cupboard / cabinet work shall have 6 mm ( six millimetre) thick water proof ply and all cut portion shall be finished with 6/12 ( six oblique twelve) thick hard wood edging including all wood of cup board and cabin etc. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) including and carriage of materials within all leads, liftsas per specification as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 250x16 mm (two hundred fifty into sixteen millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing M.S. plain grills 10x10mm (ten into ten millimetre) square or round bars in combination of 20x4mm (twenty into four millimetre) M.S. flat as per detail of required pattern in frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying vibro hydraulic compressed and polished precast terrazo tiles 20mm (twenty millimetre) thick of 300mm X 300mm (three hundred millimetre into thre hundred millimetre) of NTC make size ISI mark No. 1S237 with 70% (seventy percent) white and 30% (thirty percent) grey cement with marble chips ratio of 55% (fifty five percent) white and 15% (fifteen percent) each of green, yellow and maroon shade of specified sizes laid in floors, treads of steps and landings on a bed of 25mm (twenty five millimetre) average thicknes of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete including carriage of material as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing steel door, windows, ventilaters and clerestory windows frame manufactured from M.S. channal 75x40mm (Seventy five into forty millimetre), size vertically welded with M.S. flat 75 X 4mm (Seventy five into four millimetre) for central frames with split to end tail to each jambs including joints and miterd and welded with 16 X 3.15mm (Sixteen into three point five millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete block 15cm X 10cm X 10cm (Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate twenty millimetre nominal size) with provision for locking arragnement and shock observor fixed with by mechanical means lugs and curing complete including applying a coat of approved steel primer after pretreatment of the surface as required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections,joints mitred and welded with 16x3.15 mm ( sixteen into three point fifteen) lugs 10 cm. (ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm size ( fifteen into ten into ten centimetre) of 1:3:6(one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts in fixed steel windows as required and iron fittings,including providing and fixing 5mm (five millimetre) thick modi guard glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per specification incluiding all taxes and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing steel glazed doors,windows and ventilators of standard rolled steel sections,joints mitred and welded with 16x3.15 mm ( sixteen into three point fifteen) lugs 10 cm. (ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm size ( fifteen into ten into ten centimetre) of 1:3:6(one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts side hung windows as required and iron fittings,including providing and fixing 5mm (five millimetre) thick modi guard glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per specification incluiding all taxes and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections,joints mitred and welded with 16x3.15 mm ( sixteen into three point fifteen) lugs 10 cm. (ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm size ( fifteen into ten into ten centimetre) of 1:3:6(one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts in top hung ventilators as required and iron fittings,including providing and fixing 5mm (five millimetre) thick modi guard glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per specification incluiding all taxes and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing wire gauge of standard rolled steel sections joints mitred and welded with mechanical means to relevent ISI standard specification frames and in M.S. Tee section 25X15X3mm (twenty five millimetre into fifteen millimetre into three millimetre) including glazing clips or pins, glass panes, M.S. wire mesh 4 designation 85 (eighty five) SWG and M.S. fitting as required including providing and fixing of projecting, hinges, tower bolts, handles, hooks and eyes, presty, locking arrangment spring catch etcetra and providing and fixing wire mesh fly proof including fixing with special metal sesh putty of approved make complete including applying a priming coat of red lead paint as required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets of in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating of TATA Durashine including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including all taxes, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.

Steel work riveted, bolted or welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-In-charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two or more coats (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than whiteas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two or more coat (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with enamled paint other than whiteas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto three sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

15mm (Fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture of and of required shade of undecorated wall surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smoothas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing on wall faces PVC (D-plast) 100mm dia (one hundred millimetre diametre) rain water pipes working pressure not less than 4.5 Kg (four point five) kilogram per square metre including filling the joints with approved adhesive complete within all leads and lifts and as per the direction of the Engineer-in-Charge and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing on wall faces PVC (D-plast) 100mm (one hundred millimetre) dia PVC plain bend for rain water pipes including filling the joints with approved adhesive complete within all leads and lifts and as per the direction of the Engineer-in-Charge and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying water proofing treatment applying cement slurry mixed with water proofing cement compound consisting of applying first layer of slurry of cement @ 0.488 kg/sqm (zero point four eight eight kilogram/per square metre) mixed with water proofing cement compound @ 0.253 kg/ sqm. ( zero point two five three kilogram per square metre) This layer will be allowed to air cure for 4 ( four) hours. Second layer of slurry of cement @ 0.242 kg/sqm ( zero point two four two kilogrma/ per square metre) mixed with water proofing cement compound @ 0.126 kg/sqm ( zero point one two six kilogram per square metre) . This layer will be allowed to air cure for 4 (four) hours followed with water curing for 48 ( forty eight) hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

DEEPAK KUMAR

Asavari Mahajan

ROHIT KASHYAP

DHEERAJ PURI

ABDUL GANI

Pradeep Sharma

Divya Prasad