ward 03 rotiram vatika ke bagal se r c c nala pathve ka nirman kary

Site Clearnce and other unseen item

Pthotgraphy work

Digging Of Submerged soil in or under water and or liquid mud si no 258(a)

Earth work in excavation in Nala

Sand filling in foundation with complete work.

P.C.C. work in 1:4:8 cement sand with stone dust in bed of drain.

RCC work with cement approved coarse sand and 2cm. (3/4'') gauge approved stone ballast in the proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost. S.I. No.-288 (As in item (283) above but in RCC T-beam and slab roof in 1.1.5.3)

Mild steel of iron in plain work such as reinforced concrete/ brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks and authorised over lapping shall be measured. SI No. 504

E/w of disposle by cartage lead upto 4.00 Km distance away from site work by tractor trolly.

Class-150 brick work in 1:4 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. Required for proper completion of the work. S.I. No.305

12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 2 part of find sand of 1.25 fineness modulus. SI No. 584

RCC work with cement approved coarse sand and 2cm. (3/4'') gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost. S.I. No.-288 (As in item (283) above but in RCC T-beam and slab roof in 1.1.5.3)

Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 1:2:4 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. S.I. No.273

Supplying laying and consolidation of granular material i.e. Stone Dust of approved quarry & quality in granular sub (Blanket Coat) by 3-wheeled steel/vibratory power roller 8-10 tonne with required quantity of water to achieve the desired density after preparing the existing surface in proper camber, supreading the material in uniform layer, proper camber and required thickness of 15 cm (compacted) including hire & fuel charges of power roller with driver, maintenance of barriers, caution posts, light at night and also including cost of all materials, T&P etc. required for proper completion of work as per direction of Engineer-in-charge in-

Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 1:6:12 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. S.I. No.273

Providing and Laying of Rubble moulded Zig Zag Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge. Made of G.I. wire of dia 4 mm DSR- 16.70.1

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In- charge.

Fixing of Display Board etc.

Please Enable Macros to View BoQ information