Loading…
Loading…
Tender Value
₹8.9 Cr
EMD Value
₹17.8 L
Closing Date
11 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
GENERAL
24 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) (v) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC April - 2022 [with up to date correction slip].
Definition of similar work: Any Civil Engineering work involving Building work /Concrete work. Tenderer should have valid electrical contractor's license in his/their name or he should give an undertaking that he will engage capable agencies for electrical work who has the valid electrical contractor's license in his/their name.
77 conditions · 28 needing a document upload
Uploading of Proforma -18 attached with Tender document (Certificate signed by Tenderer and Chartered Accountant), w he n balance sheet for the first previous year is yet to be prepared/ audited.
Proforma-16 for self-certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement order value less than of Rs. 10 Crores. OR Proforma-17 for Certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. Provisions of Make in India Policy 2017 (revised during 2024 vide Department for Promotion of Industry and Trade, Ministry of Commerce and Industry's letter No. P-45021/2/2017-PP (BE-II)-Part(4)Vol.II dated 19.07.2024) issued by Govt. of India, as amended from time to time, shall be followed for consideration of tenders.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) documents shall be submitted according to clause 14 of IRGCC 2022:
The General Conditions of Contract governing the performance of the works covered by this tender are the Indian Railway Standard General Conditions of Contract [IRSGCC] as amended from time to time up to date. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the attached documents to the tender for reference. Hard copy of IRSGCC (with up-to-date correction slip) may be perused in the office of the Principal Chief Engineer Officer/ South Western Railway / Hubballi - 580020. The tenderer/s is/are deemed to have kept himself/themselves fully Informed of the provisions of the IRS General conditions of Contract including all corrections and Amendments issued up to date while submission of offer and any claim that he/they is/are not aware of any amendment or correction slip to the IRSGCC shall not be entertained.
STUDY OF DRAWINGS AND LOCAL CONDITIONS: The drawings for the works can be seen in the office of the General Manager/Divisional Railway Manager. It should be noted that these drawings are meant for general guidance only and Railway may suitably modify them during the execution of work according to the circumstances without making the Railways liable for any claims on account of such changes. If there is any variation between the description in the tender and the detailed plans, the Engineer-in-Charge will operate the correct description and his decision is final and binding on the tenderer/ Contractor. The Tenderer/Contractor is required to inspect the sites of works and acquaint himself with the site conditions, availability of approaches for transporting of men and materials, space and other factors relating to the works, availability of labour, electricity and water, etc., before quoting his rates. The extent of lead and lift involved in the execution of works and any difficulties involved in the execution of work should also be examined before formulating the rates for complete items of works described in the schedule. The Tender submitted will be deemed to have been made after such inspection.
DRAWINGS FOR WORKS: The percentage rates for the schedule items and itemized rates for the non-scheduled items quoted by the tenderer as may be accepted by the railways will, hold good irrespective of any changes, modifications, alterations, additions, omissions in the locations of structures and detailed drawings, specifications and/or the manner of executing the work. It should be specifically noted that some of the detailed drawings may not have been finalized by the Railway and will, therefore, be supplied to the contractor as and when they are finalized on demand. No compensation whatsoever on this account shall be payable by the Railway Administration. No claim whatsoever will be entertained by the Railway on account of any delay or hold up of the works arising out of delay in approval of drawings, changes, modifications, alterations, additions, omission and the site layout plans or detailed drawings and design and/or late supply of such material as are required to be arranged by the Railway or due to any other factor on Railway Accounts.
Manual tenders, supporting documents etc., sent by Post/FAX/Courier or in Person SHALL NOT BE ACCEPTED.
All requisite documents are to be properly submitted online only and the bidders should ensure that the content of the documents uploaded is distinctly legible /readable.
CORRIGENDUM NOTICE ON IREPS: Railway may modify the tender document by issuing online corrigendum through "www.ireps.gov.in" 15 days prior to the tender closing date. For the purpose of CORRIGENDUM in the tender, NIT period is splitted as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer.
If the Bid of a Tenderer is seriously unbalanced in relation to the Engineer's estimate of the cost of work to be performed under the contract, the Railways may require the tenderer to produce detailed price analysis for any or all items of the Tender Schedule, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed.
No Technical and Financial credentials are required for tenders having value up to Rs 50 lakh. For tenders valuing more than Rs. 50.00 lakh: The offer of Tenderer(s) who do not enclose Experience Certificate & Turnover Certificate with requisite details, and supporting documents along with their Tender to establish their credentials shall be summarily rejected, even though they are working contractors or contractors on approved list.
The offer shall be evaluated only from the certificates/documents submitted along with the tender offer.
Any Certificate /Documents offered / submitted /received after the tender opening shall not be given any credit and shall not be considered.
Attestation of documents may be self attested or attested by a Gazetted Officer.
Railwayreservestherighttoverifythe authenticityofthe documents/information furnished.
IRSGCC para 6.0 of part-I (a)(ii) Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt.& as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates. (a)(iii) The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/ UTGST /SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority. (a)(iv) In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority. (b) When work is tendered for by a firm or company, the tender shall be signed by the individual legally authorized to enter into commitments on their behalf. (c) The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Increase/decrease of TAXES: if rates of existing GST or cess on GST for Works Contract is increased or any new tax /cess on Works Contract is imposed by Statute after the date of opening of tender but within the original date of completion/date of completion extended under clause 17 & 17A and the Contractor thereupon properly pays such taxes/cess, the Contractor shall be reimbursed the amount so paid. Further, if rates of existing GST or cess on GST for Works Contract is decreased or any tax/cess on Works Contract is decreased / removed by Statute after the date of opening of tender, the reduction in tax amount shall be recovered from Contractor's bills/Security Deposit or any other dues of Contractor with the Government of India.
Fixed Deposit Receipts (FDRs) submitted after award of tender towards Security Deposit/Performance Guarantee should be with automatic renewal facility only.
CONSORTIUM AGREEMENTS AND MOUS SHALL NOT BE CONSIDERED FOR PARTICIPATING IN THIS TENDER.
Tenderer(s) shall note that conditional/alternate offer will not be considered and will summarily be rejected, even though such condition makes them as the lowest tenderer.
Shramik kalyan While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramik kalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till ____Month, ____Year.
Date of inviting tender shall be the date of publishing tender notice on IREPS website if tender is published on website or the date of publication in newspaper in case tender is not published on website.
Sr.DEN/East/SBC section: Provision of Automatic signaling between Whitefield (WFD) - Jolarpettai (JTJ) section - Construction of Auto Goomties buildings including electrical portion. Maintenance period is 3 years. Composite Tender.
08SBC26OF16-04-26ITEM-04
08SBC26OF16-04-26ITEM-04
Open
Works - General
15 Months
Dharwad, Karnataka
₹0
₹17.8 L
11 May 2026
17 Apr 2026
27 Apr 2026
268 items across 6 schedules · ₹11,02,31,450.55 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 450 | 187.24 | 84,258 |
| 2 | All kinds of soil | cum | 2000 | 205.45 | 4,10,900 |
| 3 | Ordinary rock | cum | 500 | 412.95 | 2,06,475 |
| 4 | Hard rock (requiring blasting) | cum | 30 | 711.35 | 21,340.5 |
| 5 | Hard rock (blasting prohibited) | cum | 10 | 1,184.3 | 11,843 |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 800 | 253.95 | 2,03,160 |
| 7 | All kinds of soil | cum | 1500 | 104.5 | 1,56,750 |
| 8 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 60 | 2,161.2 | 1,29,672 |
| 9 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 470 | 6,833.4 | 32,11,698 |
| 10 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 60 | 9,375.2 | 5,62,512 |
| 11 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | Per bag of cement of 50kg | 1800 | 57.15 | 1,02,870 |
| 12 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 350 | 8,364.2 | 29,27,470 |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 690 | 10,185.05 | 70,27,684.5 |
| 14 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 2000 | 307.95 | 6,15,900 |
| 15 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 2300 | 766.55 | 17,63,065 |
| 16 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 900 | 608.35 | 5,47,515 |
| 17 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 450 | 804.25 | 3,61,912.5 |
| 18 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 30 | 9,673.5 | 2,90,205 |
| 19 | Hot rolled deformed bars | Kg | 85000 | 89.65 | 76,20,250 |
| 20 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 300 | 8,512.1 | 25,53,630 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 1040 | 8,288.35 | 86,19,884 |
| 22 | cum | 1040 | 142 | 1,47,680 | |
| 23 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 1760 | 6,653.45 | 1,17,10,072 |
| 24 | Area of slab over 0.50 sqm | Sqm | 110 | 4,425.35 | 4,86,788.5 |
| 25 | Granite work | Metre | 110 | 418.85 | 46,073.5 |
| 26 | White sand stone - 30mm thick gang saw cut stone | Sqm | 110 | 2,577.7 | 2,83,547 |
| 27 | Decorative veneer facings of approved manufacture | Sqm | 50 | 1,645.8 | 82,290 |
| 28 | Second class teak wood | cum | 2.5 | 1,31,576.95 | 3,28,942.38 |
| 29 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 150 | 1,897.1 | 2,84,565 |
| 30 | 30 mm thick | Sqm | 80 | 4,065.5 | 3,25,240 |
| 31 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 21 | 401.4 | 8,429.4 |
| 32 | Fixed to steel windows by welding | Kg | 31000 | 181 | 56,11,000 |
| 33 | With 2nd class teak wood beading 62X19 mm | Sqm | 150 | 1,164.9 | 1,74,735 |
| 34 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 21 | 817.5 | 17,167.5 |
| 35 | 250x16 mm | Each | 21 | 234.9 | 4,932.9 |
| 36 | 250x10 mm | Each | 21 | 104.4 | 2,192.4 |
| 37 | 150x10 mm | Each | 21 | 75.55 | 1,586.55 |
| 38 | 125 mm | Each | 42 | 60.05 | 2,522.1 |
| 39 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 720 | 702.6 | 5,05,872 |
| 40 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 280 | 3,496.75 | 9,79,090 |
| 41 | Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). | Sqm | 305 | 10,030.3 | 30,59,241.5 |
| 42 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 2000 | 111.95 | 2,23,900 |
| 43 | Dark shade pigment using ordinary cement | Sqm | 90 | 983.95 | 88,555.5 |
| 44 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 70 | 935.6 | 65,492 |
| 45 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 315 | 1,142.8 | 3,59,982 |
| 46 | Size of Tile 600x600 mm | Sqm | 1900 | 1,416.65 | 26,91,635 |
| 47 | 110 mm diameter | Metre | 420 | 319.75 | 1,34,295 |
| 48 | 110 mm | Each | 420 | 309.5 | 1,29,990 |
| 49 | 1:6 (1 cement: 6 fine sand) | Sqm | 15100 | 282 | 42,58,200 |
| 50 | 1:3 (1 cement : 3 fine sand) | Sqm | 1900 | 253.05 | 4,80,795 |
| 51 | Flush/ Ruled pointing | Sqm | 850 | 319.35 | 2,71,447.5 |
| 52 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 7000 | 162.55 | 11,37,850 |
| 53 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 9000 | 97.6 | 8,78,400 |
| 54 | Two or more coats on new work | Sqm | 600 | 131.45 | 78,870 |
| 55 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 7000 | 123.85 | 8,66,950 |
| 56 | Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. | Sqm | 150 | 3,979.65 | 5,96,947.5 |
| 57 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge. | cum | 50 | 701.95 | 35,097.5 |
| 58 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 50 | 2,007.1 | 1,00,355 |
| 59 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 50 | 2,928.1 | 1,46,405 |
| 60 | In cement mortar | cum | 50 | 1,698.45 | 84,922.5 |
| 61 | In cement mortar | cum | 50 | 2,027.1 | 1,01,355 |
| 62 | Of area 3 sq. metres and below | Each | 50 | 302.7 | 15,135 |
| 63 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 21 | 5,781.35 | 1,21,408.35 |
| 64 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 21 | 1,913.75 | 40,188.75 |
| 65 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 21 | 1,500.05 | 31,501.05 |
| 66 | 10 litre capacity - White | Each | 21 | 1,023.05 | 21,484.05 |
| 67 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 21 | 45.25 | 950.25 |
| 68 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | Metre | 300 | 1,077.4 | 3,23,220 |
| 69 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 | Metre | 300 | 1,042.1 | 3,12,630 |
| 70 | Sand Cast Iron S&S as per IS: 1729 | Each | 21 | 1,403.45 | 29,472.45 |
| 71 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 21 | 146.3 | 3,072.3 |
| 72 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 21 | 600.35 | 12,607.35 |
| 73 | 20 mm nominal dia Pipes | Metre | 420 | 325.1 | 1,36,542 |
| 74 | 25 mm nominal dia Pipes | Metre | 420 | 408.55 | 1,71,591 |
| 75 | 20 mm nominal dia Pipes | Metre | 420 | 513.75 | 2,15,775 |
| 76 | 25 mm nominal dia Pipes | Metre | 420 | 370.65 | 1,55,673 |
| 77 | 40 mm nominal dia Pipes | Metre | 1200 | 559.2 | 6,71,040 |
| 78 | 50 mm nominal dia Pipes | Metre | 1200 | 811.85 | 9,74,220 |
| 79 | 50 mm dia nominal bore | Metre | 900 | 654.2 | 5,88,780 |
| 80 | 15 mm nominal bore | Each | 21 | 303.85 | 6,380.85 |
| 81 | 25 mm nominal bore | Each | 21 | 532.35 | 11,179.35 |
| 82 | 50 mm nominal bore | Each | 21 | 878.25 | 18,443.25 |
| 83 | 25 mm nominal bore | Each | 21 | 399.15 | 8,382.15 |
| 84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 21000 | 9.7 | 2,03,700 |
| 85 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 42 | 6,431.3 | 2,70,114.6 |
| 86 | 450 mm dia RCC pipes. | Metre | 300 | 2,385.5 | 7,15,650 |
| 87 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 500 | 433.95 | 2,16,975 |
| 88 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 500 | 531.8 | 2,65,900 |
| 89 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 320 | 1,019.8 | 3,26,336 |
| Schedule total | ₹8,00,90,758.48 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11_compressed.pdf
ATTACHMENT
ProvisionofautomaticsignallingbetweenWFD- Ele conditions auto goomties
ATTACHMENT
IRGCCApril2022.pdf
ATTACHMENT
ACS-6.pdf
ATTACHMENT
ACS-5toGCC2022.pdf
ATTACHMENT
Instructionstobidders.pdf
ATTACHMENT
GCCACS.pdf
ATTACHMENT
NEFTForm.pdf
ATTACHMENT
GCC2022ACS-3_20230426_1141401.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022-POLICY_13.12.20221.pdf
ATTACHMENT
ACS7.pdf
ATTACHMENT
JPOCablecuts.pdf
ATTACHMENT
Standardtenderdoc-6.1.pdf
ATTACHMENT
Proforma-161718.pdf
ATTACHMENT
ACS-9dated.09.01.2025.pdf
ATTACHMENT
acs10.pdf
ATTACHMENT
Order-deptforpromotionofindustryandtrade.pdf
ATTACHMENT
TenderDoc-ProvisionofautomaticsignallingbetweenWFD-JTJsection26NosGoomties.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .