PROVN OF SEWAGE LINE NEAR APTE BLOCK OF CS DEPT FEL SPECIAL REPAIR TO SEWAGE LINE NEAR BLOCK P 66 AND P 75 AT MEADOWS AND ADDN ALTN TO TOILET FOR JCOS ORS OF SDD AT MCEME UNDER GE MCEME SECUNDERABAD

Amount

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for cement plaster 1:3, 5 mm thick including finishing even and smooth without using extra cement on ceiling complete all as specified and directed.

M&L for Preparation of new decorated surfaces of ceiling and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coats of oil emulsion distemper (OBD) complete all as specified and directed.

M&L for Preparation of old decorated surfaces of ceiling and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coat of oil emulsion distemper (OBD) complete all as specified and directed.

M&L for rendering 15 mm thick on surfaces of walls in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of OBD over a coat of primer over 2 to 3 mm wall care putty finish including preparing the new plastered wall surfaces complete all as specified and directed.

M&L for complete removal of existing surfaces and applying two coats of oil bound distemper over a coat of alkali resisitant primer and one coat ( 2mm thick) wall care putty complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and directed.

M&L Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified

S&F 100 mm long Stainless Steel butt hinges medium weight cold rolled and mild steel hinge pin complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F extruded aluminium anodised handle 125 mm fabricated type polished and fixed complete all as specified and directed.

M&L for 200 mm Aluminium anodised barrel tower bolts of extruded section rolled complete all as specified and directed.

S&F Aluminium ( Die cast ) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and all as specified and directed by Engineer in charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing srviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured Joint free Anti-skid Rectified Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for lying floor finishes complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 finished rough to receive wall tiles etc complete all as specified and directed.

M&L for Glazed ceramic tiles 450X 300X 7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

S&F in repair viterous china wash down closet pan (pedestal pattern) including connection to drain and flushing pipe etc and plastic seat cover complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs complete all as specified and directed.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

S&F wash hand basin in repair Vitreous china white flat back size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets in repairs complete all as specified and directed.

Taking up or down, 15mm dia bore, GI tubing, medium grade, complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm dia high density polythelyne pipes (CPVC) of pressure rating 06 kgf/cm2 fixed complete to concealed wall or in floors etc. complete all as specified and directed.

S&F 20mm dia for high density polythelyne pipes (CPVC) of pressure rating 06 kgf/cm2 fixed complete to concealed wall or in floors etc. complete all as specified and directed.

S&F 15mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore Bib taps fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 750mm complete all as specified and directed.

S&F 15mm dia brass Stop valves screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15mmbore complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white all as specified including flushing pipe and waste pipe in repairs complete all as specified and directed.

S&F in CP 15mm, stop valves/ angle cock (Push type), cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe for urinals complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing types and fixing to wall for urinal partition complete all as specified and directed.

S&F for chromium plated urinal spindle spreader 15mm fix to urinal complete all as specified and directed by engineer in charge.

S&F hand shower (Health faucet) (ABS Body) with 15mm dia, 1.2m long flexible tube & wall hook complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs, PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I 1000 Ltrs capacity including all fittings complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F towel rod in repair with hanging hooks etc of stainless steel 60 cm long complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, lights,sockets etc), and making good disturbed surfaces of walls, floors etc, complete all as specified and directed.

Taking down unserviceable sub main wiring of any size two/four single core including earth wire and PVC conduit/ casing capping and removing materials from site and making good the disturbed surface of wall etc complete all as specified and directed

Material and labour for concealed point wiring with 1.5 Sqmm nominal cross sectional area single core 1100 Volts grade, multistranded, FRLS (ISI marked) PVC insulated unsheathed copper conductor cable in and including PVC concealed conduit of minimum 20mm dia of complete with and including all fittings & accessories and terminated to and including modular boxes and modular white cover plates of suitable size including continuous earth wire of size 1.5 Sqmm (nominal cross sectional area) single core, FRLS (ISI marked) PVC insulated multistranded copper conductor cable, unsheathed and connected to common earth and earth dolly for one light point controlled by one, one way switch, complete all as specified and directed. Note:- Cutting and chasing will be measured and paid seperately.

-ditto- All as per item No. 45 above but for one exhaust fan point control by one way modular switch

-ditto- All as per item No. 45 above but for one 3 pin modular socket outlet 6 amps, on same board.

All as per item No. 45 above but using 4.0 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 6/16 Amps modular switch socket point including running 4.00 Sqmm copper conductor PVC wire as earth continuity conductor on independant board.

Supply and fixing switch modular type,1 M, single pole, one way 6Amp 230 Volt complete all as specified and directed

Supply and fixing switch Modular type,1 M, single pole, one way 16 Amp 230volt complete all as specified and directed

Supply and fixing socket outlet modular type,2 M, 6/16 Amp 230volts complete all as specified and directed

Supply and fixing socket outlet modular type,2 M, 6 Amp 230volts complete all as specified and directed

Supply and fixing ceiling rose, 3 phase, PVC/Polycarbonate, insulated body (ISI Marked) complete all as specified and directed.

Supply and fixing Exhaust fan, heavy duty, 300 mm sweep metal body with louvers, AC single phase, 230 Volts, 1400 rpm and connecting up with and including necessary 3 core PVC insulated copper flexible cord of size 23/0.019 from exhaust fan to the ceiling rose including making hole in the wall and making good edges in cement plaster complete all as specified and directed. Make :- Havells/ Bajaj/ CG

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed Make :- Havells/ crompton/ Bajaj

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .Make :- Havells/ crompton/ Bajaj

Supply and fix LED energy efficient security light fitting of capacity of 60 W including suitable dia GI pipe bracket for fixing the light on wall all as specified and directed. NOTE : quoted rate included the suitble GI pipe bracket,nuts and bolts. Make :- Havells/ crompton/ Bajaj

Material and labour for Submain wiring on surface conduit with 2 runs of single core 6.0 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade suitable size dia including one run of single core 6.0 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed.

Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of andings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good all as specified and as directed

Supply and fixing sheet metal enclosure MCB DB 4 way SPN double door suitable for 240 V fixed flush on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed.

Supply and fixing MCB, SPN, AC, 240 volts of 06 to 40 Amps capacity "C" series and making connections complete all as specified & directed.

Supply and fixing MCB, SP, AC, 240 volts of 06 to 40 Amps capacity "C" series and making connections complete all as specified & directed.

Excavation in trenches not exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for foundations, manholes, laying of sewage lines etc., n.exc. 10Sqm on plan and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Description all as per Item No. 43 above but depth exc. 1.5m and n.exc. 3 mtr.

Demolition and breaking up of drain pipes (Salt glazed ware, AC or Reinforced concrete) of 200mm internal dia set in cement mortar complete all as specified and as directed.

Demolition and breaking up of drain pipes (Salt glazed ware, AC or Reinforced concrete) of 150mm internal dia set in cement mortar complete all as specified and as directed.

M & L RCC drain pipes of 200mm bore, class NP3, with collars laid and jointed, laid in tenches and jointed in CM 1:1 complete all as specified and as directed.

M & L RCC drain pipes of 150mm bore, class NP3, with collars laid and jointed, laid in tenches and jointed in CM 1:1 complete all as specified and as directed.

M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) concrete bed to drain pipes of 200 mm dia, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) concrete bed to drain pipes of 150 mm dia, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work or stone/boulder masonry built in Cement Mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer-in-Charge.

M&L Brick work with Fly ash bricks (old size bricks) straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4. complete all as specified and as directed.

M & L 100 mm thick PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) hard standing, finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in copings, benching for manholes, haunching around manhole frame for setting etc including weathering, slightly rounded or chamfered angles and throating and including necessary form work complete all as specified and as directed.

M & L for Rendering 15mm thick in CM 1:4 using water proofing compound as per manufacturer's instructions on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in man holes cover slabs etc including necessary form work and set in CM 1:6, complete all as specified and as directed. Note:- Reinforcement will be measured and paid seperately

M&L for Mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200/225mm dia pipe complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall in repair height upto 12 mtr complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) bend complete all as specified and as directed by Engineer-in-Charge.

S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or un equal complete all as specified and as directed by Engineer-in-Charge.

S&F PVC SWR floor trap plain 75mm dia with grating including jointing with solvent cement in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F PVC Gully trap 125mm size setting and jointing with solvent cement in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F for PVC (SWR) vent cowl, bore of pipe in 110mm, etc complete all as specifed and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out hard / dense soil complete all as specified and as directed by Engineer-in-Charge.

Excavation over areas & depth not exceeding 1.5 M deep and getting out in hard / dense soil complete all as specified and as directed by Engineer-in-Charge.

Excavation over areas & depth exceeding 1.5 M and not exceeding 3 M deep and getting out inhard / dense soil complete all as specified and as directed by Engineer-in-Charge.

M&L for Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:6 on fair faces of stone masonry, brick surfaces or on concrete surfaces finished even and smooth (without using extra cement) with WPC (WPC measured and paid separately) complete all as specified and as directed by Engineer-in-Charge.

M&L for use and waste of form work to sides and soffits of floor or roof beams, lintles, cantlevers, shelves incl supports etc for rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for reinforced cement concrete (Nominal mix) type B1 1:2:4 (20 mm graded aggregate) in lintel bands, roof beams and cantilevers etc complete all as specified and as directed by Engineer-in-Charge.

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, screen for septic tank and similar work confirming to Fe 290. Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified and as directed by Engineer-in-Charge.

M & L for plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded complete all as specified and as directed by Engineer-in-Charge.

S & F for rungs, bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples, hains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Fair finished surface complete all as specified and as directed by Engineer-in-Charge.

M&L for reinforced Cement Concrete 1:2:4 20 mm graded aggregate nominal mix for slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, desk slabs and in shelves and the like all as specified and directed by Engineer in charge.

Returnng, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC (1:3:6) type C2 using 40 mm graded aggregate as in plinth protection/ Paths of average 100mm thick. Finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.

M&L for 2.4 M dia Soak pit (PCC Block Construction) including earth work like excavation in any type of soil, returning filling and removal of soil upto a distance of 100m from starting point. Foundation in PCC, Walls, Roof slab, Rungs, Man holes etc all as per CECZ TD Drawing No. TD/ST/747 Sheet No. 1/1 dated 22.01.2011 complete all as specified and as directed by Engineer-in-Charge.

Pumping out sewage water / sludges from Septic Tanks / Soak Wells / Sumps etc., of any size / dia by means of mechanical operated equipment / trolley mounted Browsers duly taking all precautionary measures and removing sludge / water out side and away from the MD land (working on foul condition) complete all as specified and directed.

M&L On site LLDPE septic tank designed to carry sewage and sludge water including earth work including excavation, returning filling and removing upto a distance of 100m in any type of soil, PCC 1:3:6 as in foundation and necessary haunching to fix the tank including PVC Vent pipe of appropriate size and all necessary fittings connection to Sewage Line and Soakage Well etc complete of minimum 5500 ltre of capacity(single or double) of reputed make as approved by the GE including all fittings complete all as specified and directed.

MAHALAKSHMI INFRA PROJECTS

M/s D.Krishna Varma

M/S DIVIJA BUILDERS

SAI RUPA CONSTRUCTIONS