SPL REPAIR TO BLDG NO T-88 AND PROVN OF HARD STANDING, RETAINING WALL AND ALLIED INFRA FOR 7 COMPO PL ASC AT NAUGAM UNDER GE 969 EWS

Amount

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m depth for foundation, etc, and get out in hard / dense soil, complete all as specified and as directed.

Excacvation over area n exc. 1.5m deep and getting out in hard/dense soil, complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) as in mass Concrete, complete all as specified and as directed.

M&L for Walling of squared rubble, regular coursed well bonded, bedded and solidly hearted built in CM 1:4, complete all as specified and as directed.

Extra over stone walling for hammer dressing to face of stone squared regular masonary regular course and dressing of face beds and joints complete all as specified and as directed.

M&L precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggr) as in boulders for stone walling and set in CM 1:4, complete all as specified and as directed.

M&L raised pointing to squared rubble coursed stone masonry in CM 1:4 complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

Returning filling in, including spreading levelling, watering & well ramming in layers n exc 25 CM with any type of soil, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified

M&L for surface excavation n. exc 30 cm deep and averaging 15 cm deep in hard soil and getting out, complete all as specified and as directed.

M&L for hardcore (broken stone of guage n exc. 63 mm depositing spreed and levelled in layers n .exc 15 cm thick) watering and ramming to a true complete all as specified and as directed.

M&L for 100mm thick PCC type D2 (1:4:8) 40 mm graded aggregate as in sub base to paver block complete all as specified and as directed.

M&L for pre-cast concrete rubber moulded glossy finished interlocking paver Block of 80 mm thick M-40 grade any colour (as approved) and design over sand cushioning complete including with using grey cement and pigment any shape and size confirming to IS-15658 -2006 complete all as specified and as directed.

Sand filling under floor or in foundation including watering and consolidation, complete all as specified and as directed. Note: Sand for cushioning is measured & paid separately under respective item

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in in lintels upto 1.5m clear span, cills, steps: seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F retro reflective signage boards made up of 2mm thick aluminium sheet face to be fully covered with high intensity Prismatic a(Type-IV) sheeting conforming to Type ll of ASTM_D4956-01 as approved by Engineer -in -charge letters, borders etc, as per IRC: 67-2012(3rd Revision) in silver white with blue/green colour back ground and with high intensity grade, pasted on substrate by pressure senstitive adhesive backing which shall be activate by applying pressure conforming to class lIASTM-D-1956-01 and fixing the same with 50 mm dia stainless steel tubular section of 304 Grade, rivets or bolts and nuts in suitable height. Cost of excavation of post holes,erecting with PCC 1:2:4, stainless steel ( for post and frame) in all position complete as per drawings directed of Engineer -in Charge deemed to be included in this item.

S&Fretro reflective high intensity Prismatic (IV) sheeting (Without aluminium sheet) conforming to Type Ill of ASTM-D-4956-01 as approved by Engineer -in-Charge with letters, borders etc as per IRC 67:2012(3rd Revivison) in silver white and blue/green colour back ground with high intensity grade pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class Il ASTM-D-1956-01 and fixing the same other side of existing sign boards placed vide item No 17 above complete all as specified and as directed.

M&L PCC 1:3:6 type C- 2 Cement concrete in surface channels and drains (using 40 mm graded crushed stone aggregate), complete all as specified and as directed.

M&L for Re-inforced concrete pipe class NP-2 laid and jointed complete with collars of 450 mm dia, complete all as specified and as directed.

Taking Down complete Steel Gate upto 6mtr width (02 Nos shutter) and refixing in the same opening after raising road level with complete finishes as directed by Engr-in-charge. (Note: Necessary brick work for gate pillar, cement concrete work and minor repair/weldingg of steel gate included in this Job)

S&F framed work of Gde 410 as in doors or gates of angle or railing or other section with gusset plates, rails, braces, et., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new steel surfaces over one coat of red oxide primer over 10cm width of grith including preparation of surfaces.

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified.

S&F in repair Wooden panelling with tongued & grooved joint laminated over high quality DHF,8 mm to 10 mm thick fixed to timber frame work in any position,complete all as specified. Note :-Timber frame work rate included in same item.

S&F in repairs 2nd class soft wood (kail) Prelaminated wooden flooring as in boarding in floors incl 5mm thick foam, 15mm thick, planed one side and edges tongued and grooved or rebeated as in flooring fixed with nails in floor, complete all as specified and as directed. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

S&F in repair single leaf frameless glazed door with 12mm thick toughened glass door,edged polished around, hung type, frosted with designer logo(any pattern, approx frosted area 1.6 Sqm ) including taking down existing door with frame of any description and necessary glass hardware for new as appended below compete all as specified and as directed. (a) SSS handle 'D' type on both leaf glass shutter and both face (CAT No:- OGH-11, Make 0ZONE or equivalent), size (25mm x 450mm) (b) Path with Pivot with complete accessories for swing door as required (c) Concealed floor spring for glass door (for max door width 1000mm) (Cat No OCFH-100, Make OZONE or equivalent) with accesories (d) Patch lock to lock swing door with accessories (e) Making good of wall surface to match with existing surface complete. Note : {All the glass hardware make of 'OZONE' or its equivalent )

S&F in repair 10mm thick toughened glass, edged polished around, fixed type alongwith powder coated aluminium anodised frame size 85 x 44 x 1.98 including SS cleat and necessary hardware ,making good of wall surface to match existing surface complete all as specified and as directed.

S&F in repair aluminium anodised sliding windows shutter glazing with and including 4.8 mm thick plain glass fixed with rubber gasket with aluminium beading, clips, frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids . Making good of wall sufaces to match with existing surfaces complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangle) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified including 15mm thick screed bed in CM 1:6 and dismantling old floor hearth or wall tile complete all as specified and as directed.

M&L for Coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in and pointed neat cement slurry in white or colour cement to match including 15mm thick mortar bed in CM 1:4 and dismantling old floor hearth or wall tile complete all as specified and as directed.

S&F in repair 15mm bore Pillar taps. cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot' or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F PVC grating doom 100mm dia with waste hole of PTMT (Min wt 25 gms), complete all as specified and as directed.

S&F in repair fancy type CP stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F fibre reinforced PVC connecting pipe 60 cm long with brass check nuts and washer both side, complete all as specified and as directed.

S&F 2nd class hard wood in scantling clean swan timber framed and fixed to the position including dismantling of decayed timber, complete all as specified and as directed.

S&F in repairs for Bib taps, Fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, 15 mm bore of pipe, complete all as specified and as directed.

S&F in repairs for vitreous china sensor urinal (CAT No URS-VWHT- 132530, Make Jaquar), compiete with sensor system ,battery, pipe, bend, plug including others accessories complete all as specified and as directed.

S&F in repairs brass chromium plated Towel rail, 20 mm dia, complete all as specified and as directed.

M&L for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair vitreous china wash basin (CAT No : CNS WHT 801 and CNS WHT 301, Make Jaquar), flat, back, size 650x400 x 200) mm including full pedestal (CAT No: CNS WHT 301, Make Jaquar) but including brackets and including cutting for and pinioning in ends of brackets, waste pipe, coupling and pillar tap complete fittings all as specified and as directed.

S&F in repair tank less vitreous china wall hung WC with sensor flush, UF soft close slim seat cover, hinges with complete accessories (CAT No ONS-WHT-10961BIUFSMTL Make: Jaquar) complete with sensor system ,battery, pipe, bend, plug incduding others accessories complete all as specified and as directed.

Demolítion of brick work, PCC block masonary, stone masonary or boulder masonary built in cement mortar complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

Corner glass shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard complete all as specified and as directed.

S&F in repair CP health faucet hand held triggered nozzle and delivers a spray of water with 1mtr length of pipe complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard and 60 cm long complete all as specified and as directed.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and as directed.

S&F in repairs steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 15mm bore, complete all as specified and as directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & tom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing including taking down chowkhat n. exc 1.5 sqm without taking off shutters from frame complete all as specified and as directed.

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long complete all as specified and as directed.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and as directed.

Taking down carefully copper aluminum point wiring (light. Fan, socket or power complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caplng wth all accessorles such as bends, elbow, reducers , junction bOxes /MS boxes 1.5 mm thick duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of requlred size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for light and fan point.

(a) M&L One light/bell fan 5 Amp same board point controlled by one switch

(b) M&L One switch socket combination 5 Amps on independent board

All as per item No. 60 herein before but with 2.5 Sqmm PVC insulated FRLS and unsheathed copper conductor for switch socket combination 3 pin 15 Amps on independent board with 1.5 Sqmm copper conductor cable as earth lead connected to common earth and dolly.

S&F Switch piano flush type 5 amps single pole one way

S&F Switch socket combination box type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch complete all as specified and as directed.

S&F witch socket combination multipurpose 5 pin/15 Amps box type complete all as specified and as directed.

S&F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block, complete all as specified and as directed.

S&F LED luminaire basic all purpose surface all mounted LED batten with polvcarbonate housing and integrated electronic driver of 1x18W,Code No-LUMILINEBS18WLED830SPCWH Make : Havells or equivalent

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

S&F round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F Air Circulator fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting, complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shuter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, complete all as specified and as directed.

M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

M & L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM

S&F in repair MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and as directed.

S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 6 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, with two single core cables flat or circular 16 sq. mm 2 core.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m beloW normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm clc in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion, Note: The rate is ilnclusive of necessary earth work, RFR and removal etc

Note:- Schedule of credit Rs.50,890.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S HAJI MOHD ASHRAF SUMJI

M/s BEECO CONSTRUCTIONS