Loading
Loading…
Loading…
Tender Value
₹2.3 Cr
EMD Value
₹2.6 L
Closing Date
9 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
Above/Below/Par
TENDER
15 conditions · 4 needing a document upload
Financial Eligibility Criteria : The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Electrical License: The individual/firm should have valid "B" grade electrical license and should be on their own name/firm name issued by the competent Authority. A copy of license should be uploaded through IREPS with their offer, failing which the tender WILL BE REJECTED.
Similar nature of work: - "Works of wiring /cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements earthings etc. (with or without supply of items/equipments) for 230 V, 1 phase or 415 V, 3 phase system or higher voltages." (Ref: Hqrs Lr.No:E.29/P/Similar nature of works Dt: 30.12.2014.)
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
37 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The General Conditions of Contract governing the performance of the works covered by this tender are the Indian Railway Standard General Conditions of Contract as amended from time to time up to date. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the annexed documents to the tender. Hard copy may be perused in the office of the Senior Divisional Electrical Engineer/Maintenance/ Secunderabad Division/ South Central Railway / Secunderabad - 500025. In submitting the tender it would be deemed that the tenderer has kept himself fully Informed of the provision of the Indian Railways Standard General Conditions of Contract including all corrections and Amendments issued upto date and claim that he is not aware of any amendment or correction slip to the IRSGCC shall not be entertained.(As per IRGCC April 2022 or latest with amendments).
STUDY OF DRAWINGS AND LOCAL CONDITIONS: The drawings for the works can be seen in the office of the Senior Divisional Electrical Engineer/Maintenance/ Secunderabad Division/ South Central Railway/ Secunderabad - 500025. It should be noted that these drawings are meant for general guidance only and Railway may suitably modify them during the execution of work according to the circumstances without making the Railways liable for any claims on account of such changes. If there is any variation between the description in the tender and the detailed plans, the Engineer-in-Charge will operate the correct description and his decision is final and binding on the tenderer/ Contractor. The Tenderer/Contractor is required to inspect the sites of works and acquaint himself with the site conditions, availability of approaches for transporting of men and materials, space and other factors relating to the works, availability of labour, electricity and water, etc., before quoting his rates. The extent of lead and lift involved in the execution of works and any difficulties involved in the execution of work should also be examined before formulating the rates for complete items of works described in the schedule. The Tender submitted will be deemed to have been made after such inspection.(As per IRGCC April 2022 or latest with amendments).
DRAWINGS FOR WORKS: The percentage rates for the schedule items and itemized rates for the non-scheduled items quoted by the tenderer as may be accepted by the railways will, hold good irrespective of any changes, modifications, alterations, additions, omissions in the locations of structures and detailed drawings, specifications and/or the manner of executing the work. It should be specifically noted that some of the detailed drawings may not have been finalised by the Railway and will, therefore, be supplied to the contractor as and when they are finalised on demand. No compensation whatsoever on this account shall be payable by the Railway Administration. No claim whatsoever will be entertained by the Railway on account of any delay or hold up of the works arising out of delay in approval of drawings, changes, modifications, alterations, additions, omission and the site layout plans or detailed drawings and design and/or late supply of such material as are required to be arranged by the Railway or due to any other factor on Railway Accounts.(As per IRGCC April 2022 or latest with amendments).
Manual tenders sent by Post/FAX/Courier or in Person SHALL NOT BE ACCEPTED (As per IRGCC April 2022 or latest with amendments).
If the Bid of a Tenderer is seriously unbalanced in relation to the Engineer's estimate of the cost of work to be performed under the contract, the Railways may require the tenderer to produce detailed price analysis for any or all items of the Tender Schedule, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed. (As per IRGCC April 2022 or latest with amendments).
CORRIGENDUM NOTICE ON IREPS: [I] Railway may modify the tender document by issuing online corrigendum through www.ireps.gov.in [II] Prospective Bidders shall keep watch for CORRIGENDUM upto 15 days prior to the deadline for submission of bids. For the purpose of CORRIGENDUM in the tender, NIT period is splitted as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer. [III] To give prospective bidders a reasonable time on account of CORRIGENDUM in preparing their bids, the Railways may at their discretion extend as necessary, the deadline for submission of Tender document. Railways decision will be final and no correspondence will be entertained from prospective bidders. (As per IRGCC April 2022 or latest with amendments).
E-Tender shall be rejected if it is not accompanied by the prescribed: [1] Cost of tender document [2] EMD [3] Certificate(s) in support of technical eligibility criteria [4] Certificate(s) in support of financial eligibility criteria [5] Copy of documents in support of Proprietary concern/ Partnership firm / Pvt.Ltd.company / Limited Company / JV firm / Valid MOU for JV firms as detailed in COMMERCIAL COMPLIANCE. (As per IRGCC April 2022 or latest with amendments).
The bidders/tenderers should ensure that they are GST compliant. Quoted rates are inclusive of applicable GST as per GST ACT -2017 amended from time to time and as detailed in Special Conditions - General (under TAXES clause). (As per IRGCC April 2022 or latest with amendments).
The tenderer[s] may also upload the following documents alongwith his/their tender: The tenderer may upload method statement, which shall contain organizational set up and working systems to be adopted by the successful tenderers during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and inturn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall adhere to the time frame as mentioned in mile stone chart prescribed in the tender. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall engage the personnel with requisite qualification as per Special Conditions of Contract. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall deploy adequate number of plant and equipment for the execution of subject contract works to achieve progress as per mile stone chart. (As per IRGCC April 2022 or latest with amendments).
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given. (As per IRGCC April 2022 or latest with amendments).
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award. (As per IRGCC April 2022 or latest with amendments).
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed. (As per IRGCC April 2022 or latest with amendments).
[1] I/We have read the various conditions of the tender attached hereto and hereby agree to abide by the said conditions. I/We also agree to keep this tender open for acceptance for the period mentioned in the tender document [NIT HEADER] from the date fixed for opening the same and in default thereof, I/We will be liable for forfeiture of my/our Earnest Money Deposit submitted. [2] I/We offer to do the work at the percentage rates quoted by me/us in the attached schedule and bind myself/ourselves to complete the work within the period of completion given in this tender document [NIT HEADER] from the date of issue of letter of acceptance of this tender. I/We also hereby agree to abide by the IRS GCC and Special Conditions of contract in carryingout the works laid down by South Central Railway for the present contract. [3] The full value of the earnest money paid shall stand forfeited without prejudice to any other rights or remedies of the railway if [a]I/We do not execute the contract document within seven days after receipt of notice issued by the Railway that such documents are ready: OR [b] I/We do not commence the work within fifteen days after receipt of orders to that effect. [4] Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work. (As per IRGCC April 2022 or latest with amendments).
I/We fail to submit the requisite Performance Guarantee [P.G] in the prescribed format within the time limit as prescribed in GCC (as amended from time to time) from the date of issue of Letter of Acceptance, we are aware that the contract shall be terminated duly forfeiting EMD and other dues, if any payable against the contract. Also, I/We shall be debarred from participating in the retender for the work. (As per IRGCC April 2022 or latest with amendments).
I/We understand that no post-tender correspondence will be entertained, however, if any clarification is required by the Railway, the same will be sought from the tenderer. Also, I/We are aware that any Certificate/ Documents offered after the tender opening shall not be given any credit and shall not be considered. (As per IRGCC April 2022 or latest with amendments).
I/we do hereby solemnly affirm and state on behalf of the tenderer including its constituents as under: (As per IRGCC April 2022 or latest with amendments).
[i] I/We the tenderer(s) am/are signing this document after carefully reading the contents. [ii] I/We declare and certify that I/We have not made any misleading or false representation in the documents, forms, statements attached in proof of the qualification requirements. [iii] I/We also understand that my/our offer will be evaluated based on the documents/credentials uploaded alongwith the offer and the same shall be binding upon me/us. [iv] I/We declare that the information and the documents attached alongwith the tender by me/us are correct and I/We are fully responsible for the correctness of the information and the documents submitted by us. (As per IRGCC April 2022 or latest with amendments).
[i] I/We do hereby undertake that, if any of the certificates regarding eligibility criteria submitted by us are found to be forged/false/incorrect at any time during the process of evaluation of the tenders, it shall lead to forfeiture of the tender EMD. Further, I/We and all my/our constituents understand that my/our offer shall be summarily rejected. [ii] I/We also understand that, if the certificates submitted by us are found to be false/forged/ incorrect at any time after the award of the contract, it will lead to termination of the contract besides suspending of business for 5 years, with the tenderer and with all the partners in case of partnership firm and with all the members of a JV in case of a Joint Venture, forfeiture of EMD/SD and Performance Guarantee and any other action provided in the contract. (As per IRGCC April 2022 or latest with amendments).
It is certified that I/We have not been blacklisted or debarred by railways or any other ministry/ department/public sector undertaking of the government of India/State Government from participation in tenders/contract on the date of tender opening of bids, either in individual capacity or as a member of JV firm in which I/We were/are members. (As per IRGCC April 2022 or latest with amendments).
I/We indemnify and save harmless the Railway from and against all actions, suit proceedings losses, costs, damages, charges, claims and demands of every nature and description brought or recovered against the Railways by reason of any act or omission of the Contractor, his agents or employees, in the execution of the works or in his guarding of the same. All sums payable by way of compensation under any of these conditions shall be considered as reasonable compensation to be applied to the actual loss or damage sustained, and whether or not any damage shall have been sustained. (As per IRGCC April 2022 or latest with amendments).
The prices are inclusive of GST
Secunderabad Electrical Maintenance Department - (i) SNF Freight Depot - Augmentation/ Upgradation of Freight wagon maintenance infrastructural facilities (ii) Hyderabad - Creation of additional Trip Inspection facilities for Electric Locomotives at TS/HYB. (iii) KZJ Freight Depot: Augmentation/ Upgradation of Freight wagon maintenance infrastructural facilities. (iv) DLS-Kazipet - Augmentation of facilities in Diesel Sheds for homing of electric locomotives at Diesel loco shed, Kazipet. (v) DSL/KZJ - Renovation of Depot stores and construction of new office building at Diesel Stores. (vi) Development and Upgrading of infrastructure facility in the existing KTPS siding and manning of 4 Nos unmanned LCs Near Gagulagudem) Paloncha - Electrical Arrangements
E-M-SC-32-OT-2025-26~SCR
E-M-SC-32-OT-2025-26
Open
Works - General
6 Months
Hyderabad, Telangana
₹0
₹2.6 L
9 Jan 2026
16 Dec 2025
26 Dec 2025
327 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,27,61,086.9 | ||
| — | 35.00 | — | — | ||
| Concrete for foundations and plinth in other than hard soil and rock | — | — | — | 1,40,105 | |
| — | 48.00 | — | — | ||
| Concrete for foundations and plinth in hard soil. | — | — | — | 2,06,016 | |
| — | 230.00 | — | — | ||
| Supply & Erection of 50mm 'B' class GI pipes as per IS:1239 (or ) Latest ammendments along with accessories. | — | — | — | 76,360 | |
| — | 310.00 | — | — | ||
| Horizontal drilling of bores for LT cables | — | — | — | 3,93,390 | |
| — | 3950.00 | — | — | ||
| Excavation of cable trench in all types of soils for LT cable as per the directions of engineer at site making good after laying the cable | — | — | — | 5,13,500 | |
| — | 410.00 | — | — | ||
| Excavation of cable trench in Tar road surface as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 88,560 | |
| — | 1150.00 | — | — | ||
| Excavation of cable trench incement concrete bed flooring as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 4,65,750 | |
| — | 320.00 | — | — | ||
| Excavation of cable trench across No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 84,800 | |
| — | — | — | Rly | ||
| — | 64.00 | — | — | ||
| Provision of Earthing arrangements. | — | — | — | 2,23,872 | |
| — | 10.00 | — | — | ||
| Supply and Erection Provision of RCC earth pit hollow box of size 300 mm x 300 mm x 300mm with 50 mm wall thickness as per Drg. no. SDO/RDSO/E&B/001 by using M20 Grade precast RCC. It includes fixing of earth pits at various locations (All the required men, material and transportation are to be arranged by contractor) | — | — | — | 7,360 | |
| — | 10.00 | — | — | ||
| Supply and Erection of RCC precast slabs with hook to cover Earth pits of dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.) | — | — | — | 1,560 | |
| — | 1250.00 | — | — | ||
| Supply and erection of 50mm size of HDPE pipe of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (SDR - 21) (or ) Latest ammendments | — | — | — | 1,13,750 | |
| — | 2850.00 | — | — | ||
| Supply and erection of 63 mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (or ) Latest ammendments | — | — | — | 3,79,050 | |
| — | 700.00 | — | — | ||
| Supply and erection of 110 mm size of HDPE pipe of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (SDR - 21) (or ) Latest ammendments | — | — | — | 2,93,300 | |
| — | 1400.00 | — | — | ||
| Supply and erection of 4 core x95 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations | — | — | — | 9,91,200 | |
| — | 1300.00 | — | — | ||
| Supply and erection of 4 core x70 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations | — | — | — | 7,24,100 | |
| — | 1600.00 | — | — | ||
| Supply and erection of 4 core 50 Sqmm LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations. | — | — | — | 6,36,800 | |
| — | 2750.00 | — | — | ||
| Supply and erection of 4 core x25 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations | — | — | — | 6,73,750 | |
| — | 3000.00 | — | — | ||
| Supply and erection of 4 core x16 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations | — | — | — | 5,28,000 | |
| — | 17550.00 | — | — | ||
| Supply and erection of 8 SWG GI wire. | — | — | — | 1,75,500 | |
| — | 100.00 | — | — | ||
| Supply & Erection of 19mm PVC rigid conduit pipes of 2mm thickness as per BIS- 9537 (latest) along with accessories. | — | — | — | 2,300 | |
| — | 9000.00 | — | — | ||
| Supply & Erection of 25mm PVC rigid conduit pipes of 2mm thickness as per BIS- 9537 (latest) along with accessories. | — | — | — | 2,61,000 | |
| — | 3400.00 | — | — | ||
| Supply & Erection of 32mm PVC rigid conduit pipes of 2mm thickness as per BIS- 9537 (latest) along with accessories. | — | — | — | 1,32,600 | |
| — | 450.00 | — | — | ||
| Supply & Erection of 25mm PVC casing and capping on wall along with accessories. | — | — | — | 10,350 | |
| — | 450.00 | — | — | ||
| Supply & Erection of 32mm PVC casing and capping on wall along with accessories. | — | — | — | 13,050 | |
| — | 100.00 | — | — | ||
| Supply & erection of 25mm Flexible pipes as per BIS-9537 (latest) along with accessories. | — | — | — | 2,000 | |
| — | 4220.00 | — | — | ||
| Cutting and chipping the wall for laying the PVC conduit pipe and plastering after laying the PVC conduit pipe with cement and sand mortar mixed with 1:8 ratio, but without laying PVC conduit pipe. | — | — | — | 1,64,580 | |
| — | 500.00 | — | — | ||
| Supply and erection of CPVC pipe SDR-13.5 class -I pipe of size 20 mm (3/4 inch). | — | — | — | 57,350 | |
| — | 500.00 | — | — | ||
| Supply and erection of CPVC 20 mm dia (3/4 inch) straight plain coupling including fixing etc | — | — | — | 8,780 | |
| — | 200.00 | — | — | ||
| Supply and erection of CPVC 20 mm dia (3/4 inch) Tee including fixing etc | — | — | — | 6,228 | |
| — | 100.00 | — | — | ||
| Supply and fixing of metal clamp with suitable screws (length type) on concrete surface including provision of plugs with all accessories for CPVC 20 mm dia (3/4 inch). | — | — | — | 1,199 | |
| — | 50.00 | — | — | ||
| Supply and erection of cable junction box with terminals etc (size 93x93x62 mm) with IP66 integrated membrances for cable entry suitable for 20mm CPVC pipe. | — | — | — | 23,085 | |
| — | 10.00 | — | — | ||
| Supply and erection of GI junction box of size 12"x8"x6" with hylam sheet | — | — | — | 13,000 | |
| — | 10.00 | — | — | ||
| Supply and erection of sheet steel enclosure made out of 16 SWG MS sheet powder coated with hylam sheet, locking arrangements consisting of lx 32 A DP MCB powder coated paint and other connected accessories etc." | — | — | — | 8,500 | |
| — | 10.00 | — | — | ||
| Supply and erection of Pre-Cooling box comprising of interlocked switched 63A socket with 63A 4P MCB of IP66 and straight plug complete | — | — | — | 1,78,340 | |
| — | 10.00 | — | — | ||
| Supply and erection of Thermoplastic polycarbonate box | — | — | — | 52,000 | |
| — | 5300.00 | — | — | ||
| Supply and erection of 2Nos. of 1.5 Sq.mm, of FRLS PVC insulated flexible multistrand copper wire | — | — | — | 1,80,200 | |
| — | 13500.00 | — | — | ||
| Supply and erection of 3Nos. of 1.5 Sq.mm, of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 7,42,500 | |
| — | 8100.00 | — | — | ||
| Supply and erection of 2 Nos.. of 2.5 Sq.mm, 1No. 1.5 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire. | — | — | — | 5,83,200 | |
| — | 3700.00 | — | — | ||
| Supply and erection of 2Nos.. of 4.0 Sq.mm, 1No. 2.5 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire. | — | — | — | 3,99,600 | |
| — | 1600.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 4 sq. mm FRLS Cu.Conductor | — | — | — | 80,000 | |
| — | 950.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 6 sq. mm FRLS Cu.Conductor | — | — | — | 96,900 | |
| — | 950.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 10 sq. mm FRLS Cu.Conductor | — | — | — | 1,21,600 | |
| — | 1100.00 | — | — | ||
| Supply, erection and commissioning of 3*1.5 SQmm cord copper cable | — | — | — | 73,810 | |
| — | 64.00 | — | — | ||
| Supply & Erection of 1 or 2 module GI concealed sheet metal boxes | — | — | — | 2,368 | |
| — | 74.00 | — | — | ||
| Supply & Erection of 3 module GI concealed sheet metal boxes | — | — | — | 3,848 | |
| — | 64.00 | — | — | ||
| Supply & Erection of 4 module GI concealed sheet metal boxes | — | — | — | 3,968 | |
| — | 92.00 | — | — | ||
| Supply & Erection of 6 module GI concealed sheet metal boxes | — | — | — | 7,820 | |
| — | 68.00 | — | — | ||
| Supply & Erection of 8 or 9 module GI concealed sheet metal boxes | — | — | — | 7,548 | |
| — | 76.00 | — | — | ||
| Supply & Erection of 12 module GI concealed sheet metal boxes | — | — | — | 10,412 | |
| — | 64.00 | — | — | ||
| Supply and erection 1 or 2 modular plates with frame | — | — | — | 3,392 | |
| — | 74.00 | — | — | ||
| Supply and erection 3 modular plates with frame | — | — | — | 4,884 | |
| — | 64.00 | — | — | ||
| Supply and erection 4 modular plates with frame | — | — | — | 5,696 | |
| — | 92.00 | — | — | ||
| Supply and erection 6 modular plates with frame | — | — | — | 11,408 | |
| — | 68.00 | — | — | ||
| Supply and erection 8 or 9 modular plates with frame | — | — | — | 10,812 | |
| — | 76.00 | — | — | ||
| Supply and erection 12 modular plates with frame | — | — | — | 15,048 | |
| — | 2400.00 | — | — | ||
| Supply and erection of 6/10A 1-way switch | — | — | — | 1,05,600 | |
| — | 600.00 | — | — | ||
| Supply and erection of 6/10A multi socket for cell phone pin or 2pin +3 pin with safety shutter | — | — | — | 61,800 | |
| — | 8.00 | — | — | ||
| Supply and erection of 10 A sp modular MCB | — | — | — | 2,608 | |
| — | 10.00 | — | — | ||
| Supply & erection of 3 way module size GI sheet metal/PVC box in concealed/surface asper the directions of Engineer at site with accessories | — | — | — | 610 | |
| — | 30.00 | — | — | ||
| Supply & erection of 6 way module size GI sheet concealed/surfaceas per the directions of Engineer at site with accessories | — | — | — | 2,880 | |
| — | — | — | metal/PVC | ||
| — | 20.00 | — | — | ||
| Supply & erection of 8 way module size GI sheet metal/PVC box inconcealed/surface asper the directions of Engineer at site with accessories | — | — | — | 2,440 | |
| — | 20.00 | — | — | ||
| Supply & erection of 12 way module size GI sheetmetal/PVC box inconcealed/surface asper the directions of Engineer at site with accessories | — | — | — | 3,160 | |
| — | 10.00 | — | — | ||
| Supply & erection of 3 module size modular plates with unbreakable frame as per the directions of Engineer at site with accessories | — | — | — | 770 | |
| — | 30.00 | — | — | ||
| Supply & erection of 6 module size modular plates with unbreakable frame as per the directions of Engineer at site with accessories | — | — | — | 3,660 | |
| — | 20.00 | — | — | ||
| Supply & erection of 8 module size modular plates with unbreakable frame as per the directions of Engineer at site with accessories | — | — | — | 3,060 | |
| — | 20.00 | — | — | ||
| Supply & erection of 12 module size modular plates with unbreakable frame asper the directions of Engineer at site with accessories | — | — | — | 3,780 | |
| — | 250.00 | — | — | ||
| Supply and erection of 20A one way modular switch | — | — | — | 25,250 | |
| — | 250.00 | — | — | ||
| Supply and erection of 6&20A twin socket heavy duty socket with safety shutter | — | — | — | 44,000 | |
| — | 50.00 | — | — | ||
| Supply and Erection Modular MCB 32A DP 1-way switch with LED indicator, 2 module | — | — | — | 21,901 | |
| — | 70.00 | — | — | ||
| Supply & fixing of Modular MCB DP 20/25A capacity as per the directions of engineer at site(for ac units) | — | — | — | 30,450 | |
| — | 3240.00 | — | — | ||
| Supply & Erection of Ceiling rose (3-terminal). | — | — | — | 81,000 | |
| — | 198.00 | — | — | ||
| Supply and erection of Angle holders | — | — | — | 5,346 | |
| — | 109.00 | — | — | ||
| Supply and erection of BLDC fans (1200 Sweep) with remote as per the specification enclosed | — | — | — | 2,68,140 | |
| — | 9.00 | — | — | ||
| "Supply, fixing and connecting of window mount 12"" sweep Heavyduty exhaust fan made of Alloy steel of 50W with noise level of 50-55db complete with all accessories of Almonard / Atomberg/ Crompton/ Havells/ USHAmake | — | — | — | 23,661 | |
| — | 39.00 | — | — | ||
| Supply and erection of Modular type exhaust fan 300mm/380mm | — | — | — | 60,645 | |
| — | 60.00 | — | — | ||
| Supply, fixing and connecting of 750 mm (30") sweep wall mounting air circulator with all connected accessories. Make :Super Fan, Crompton, Bajaj, Orient, Havells, USHA only. | — | — | — | 4,32,600 | |
| — | 4.00 | — | — | ||
| Supply and erection of Time switch daily operating type | — | — | — | 17,152 | |
| — | 30.00 | — | — | ||
| Supply and erection of Power contactor 25A capacity 2 NO type | — | — | — | 51,300 | |
| — | 26.00 | — | — | ||
| Supply and erection of FM1 Quartz Timer daily operating type | — | — | — | 57,876 | |
| — | 8.00 | — | — | ||
| Supply and erection of 10 W LED Indoor type tube light fitting as per specification enclosed | — | — | — | 2,400 | |
| — | 424.00 | — | — | ||
| Supply, erection,connecting, testing and commissioning of integrated T8 20W LED (indoor type) tube light fixture complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed | — | — | — | 1,74,688 | |
| — | 678.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of surface mounted LED 40W luminaire batten type fitting complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed | — | — | — | 4,44,768 | |
| — | 80.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of recess 15 W LED Round Down lighters with diffuser and electronic driver complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 47,600 | |
| — | 60.00 | — | — | ||
| Supply of 1' x 1' 18 W LED celling surface light fitting including power LEDs complete with all accessories confirming as per specification enclosed | — | — | — | 1,26,180 | |
| — | 50.00 | — | — | ||
| Supply, erection, connecting testing and commissioning of 2'X2', 43W LED luminaire complete with necessary mounting accessories, clamps and Hardware etc, as per specification enclosed | — | — | — | 1,50,450 | |
| — | 25.00 | — | — | ||
| Supply and erection of following sizes of 5 mtr hot dip galvanised double arm Conicle poles with foundation bolts, base plate, MCB & brackets. | — | — | — | 2,96,725 | |
| — | 20.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 100W LED Highbay light with PDC housing suitable for celing ( Surface/Suspended) , complete with necessary mounting accessories, clamps and hardware etc, as per specification enclosed | — | — | — | 1,11,100 | |
| — | 70.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 40W LED Street light luminarie made up of pressure die cast aluminum housing with high efficiency LED as lighting source and lens with toughened glass having bottom opening separate driver compartment with IP 66 protection suitable to operate with necessary mounting accessories, clamps and hardware etc as per specification enclosed | — | — | — | 1,10,250 | |
| — | 40.00 | — | — | ||
| Supply and erection of 60 W LED Street light luminariemade up of pressure die cast aluminumhousing with high efficiency LED as lightingsource and lens with toughened glasshaving bottom opening separate drivercompartment with IP 66 protection suitableto operate with necessary mountingaccessories, clamps and hardware etc as per specification enclosed | — | — | — | 1,12,400 | |
| — | 50.00 | — | — | ||
| Supply and errection of 120 W LED HighBay light withPDC housing suitable for celing (Surface/Suspended) , complete with necessary mounting accessories, clampsand hardware etc, as per specification enclosed | — | — | — | 3,53,500 | |
| — | 85.00 | — | — | ||
| Supply and errection of 150 W LED HighBay light withPDC housing suitable for celing (Surface/Suspended) complete withnecessary mounting accessories, clampsand hardware etc, as per specification enclosed. | — | — | — | 6,86,800 | |
| — | 8.00 | — | — | ||
| Supply, fixing,testing and commissioning of out door type 4 way terminal junction box pultruded FRP section/ MS painted asdecided by site engineer, 100%maintenance free,rust free, shock proof, weather proff, durable,with 4 terminals mounted on SMC and proper lock arrangements | — | — | — | 5,832 | |
| — | 16.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 30W LED street light fixture complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed | — | — | — | 25,248 | |
| — | 6.00 | — | — | ||
| Supply and erection of 150 ltrs Drinking water cooler consisting of Type - Storage, cooling capacity ltrs/hour - 150 ltrs/hours, Storage capacity - 150 ltrs, Maximum energy cosnumption(watt) - 1550 watt for 150 ltrs/hr cooling cap., Power factor - 0.85, conformity to IS 1475 latest, ISI marked, Eco-friendly (Non CFC refrigent), Water tank sheet material and thickness - Stainless steel (Grade AISI 304) thickness > = 0.8 mm, Water tank cover and lid bottom sheet material - High Impact Polystrene (HIP), Water tank cover lid bottom sheet thickness - 1.5 Cooler cabinet sheet material - Stainless steel (gradeAISI 304) , Cooler cabinet sheet thickness - 0.8, Waranty on Machine and Comperssor - 3 years | — | — | — | 3,00,492 | |
| — | 1.00 | — | — | ||
| Supply and erection of 40 Ltr Water Coolers | — | — | — | 30,030 | |
| — | 10.00 | — | — | ||
| Supplyand erection of Pedestal fans of 400 mm (16") sweep. | — | — | — | 23,530 | |
| — | 5.00 | — | — | ||
| Supply, fixing and connecting of wall mounting bracket fan oscillating type 16" sweep suitable for 230Volts /50 HZ built in regulator with other connected accessories | — | — | — | 10,500 | |
| — | 1.00 | — | — | ||
| Supply and installation of 6 KVA with FM (1 Ph Input -1 Ph Output), True Online Double convention UPS 192 VDC , interlink cables , MS Rack, Installation and Delivery including all accessories. | — | — | — | 70,623 | |
| — | 16.00 | — | — | ||
| Supply and installation of 12V - 65Ah SMF Batteries | — | — | — | 1,03,568 | |
| — | 35.00 | — | — | ||
| Supply a n d erection o f 16W 3 directional LED catwalk light fitting (4W+8W+4W) aluminium de cast with ip 67 protection works on 24V DC as per specification enclosed. Note Prier Approval to be taken including all accessories. | — | — | — | 78,155 | |
| — | 135.00 | — | — | ||
| S u p p l y a n d erection o f 16W 3 directional LED Pit Light fitting with IP67 Protection(10W+4W+2W) aluminium diecast with IP67 Protection as per specification enclosed. Note Prier Approval to be taken including all accessories. | — | — | — | 2,89,647.9 | |
| — | 7.00 | — | — | ||
| Supply, installation, testing and comissioning of 5 star inverter type 1.5 Ton capacity split type Air conditioning unit complete, conforming to IS: 1391(Part-2)-1992 with amdts No.1 to 4 fitted with rotary compressor suitable for using HCFC refrigerant (R-22) for wall mounting as per specification enclosed. | — | — | — | 3,46,542 | |
| — | 31.50 | — | — | ||
| Supply of copper pipe 1/4" & 1/2" of 20 SWG along with 9 mm thickness insulation | — | — | — | 33,169.5 | |
| — | 31.50 | — | — | ||
| Supply of 1" CPVC Drain pipe with all connected accessories as per site requirement. | — | — | — | 4,567.5 | |
| — | 70.00 | — | — | ||
| Supply and fixing of ISI 38/40mm width and 12.5mm height PVC pipe/Casing and Caping, with necessary screws including joints bends and all necessary accessories complete. | — | — | — | 4,410 | |
| — | 70.00 | — | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit/Casing and capping pipe. | — | — | — | 4,410 | |
| — | 30.00 | — | — | ||
| Design, supply and erectionof SMPS control Panel unit containing 3 nos of 24V 10A SMPS power supply units enclosed in sheet steel enclosure with all necessary accesorries. . Note Prier Approval to be taken including all accessories. | — | — | — | 4,37,400 | |
| — | 45.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 200 W LED Flood light fixture complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 3,90,825 | |
| — | 25.00 | — | — | ||
| Design, Supply, Erection, testing and comissioning of 22W LED Waist level luminaire as per specification enclosed | — | — | — | 80,125 | |
| — | 16.00 | — | — | ||
| Supply and erection of 3 2 A industrial Plug & socket with 32A MCB 230V 50Hz interlocking surface mounting box IP66 with Din rail complete | — | — | — | 92,320 | |
| — | 16.00 | — | — | ||
| Supply and erection of 6 3 A industrial Plug & socket with 64A MCB 230V 50Hz interlocking surface mounting box IP66 with Din rail complete | — | — | — | 1,10,096 | |
| — | 7.00 | — | — | ||
| Supply and erection of 160A 4 pole MCCB with 25 KA breaking capacity with Adjustable thermal magnetic release with spereder links(4 nos-02 sets), phase barriers | — | — | — | 53,788 | |
| — | 7.00 | — | — | ||
| Supply and erection of enclosure for fixing of 4P MCCB | — | — | — | 17,556 | |
| — | 7.00 | — | — | ||
| "Supply & fixing of 12 way Vertical TPN IP 54 distribution board similar to Legrand model No.507753 as per IEC 61439/3 or latest fixed on wall with the following switches 1X160A 25KA4pole Electronic release with inbuilt earth leakage module of adjustable sensitivity maximumoperative voltage 690V compatibility MCCB I/C and 4 x 63 A 10KA 'C' Curve TPMCB out going,4 x 32 A 10KA 'C' Curve TPMCB out going, 4 x 20 A 10KA DP 'C' Curve MCB out going, 4x10A'C' Curve SPMCB out going with all other connected accessories etc. Note: MCCBs: ICs=100%ICu " | — | — | — | 4,11,201 | |
| — | 6.00 | — | — | ||
| "Design, fabrication, supply, erection, testing, Commissioning of Outdoor LT panel board with 14SWG ( with powder coated RAL 7032 ) with suitable Bus bar 400A capacity , Digital MFM ,digital voltmeter, digital ammeter with CTs, indication lamps etc, for housing of following switchgear 250A 4P MCCB for I/C-01 No's, 2x100A 4 pole MCCB ,2x63A MCCBS , complete with accessories, etc ( Total 4 nos For each panel is 1.5Cum)Note: Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-3) (1) All cables terminations to be done along with double compression glands and required lugs. as per the direction of Engineer at site." | — | — | — | 6,80,364 | |
| — | 3.00 | — | — | ||
| "Design, fabrication, supply, erection, connecting, testing & commissioning of with 14SWG Sheet Steel Enclosure LT Panel outdoor type with suitable Bus bar 300 A capacity, Digital MFM with RS485 , digital voltmeter, digital ammeter with CTS, indication lamps etc for housing of following switchgear 250A 4P Inconmer , Outgoings 4x100A 4 pole MCCB , 4*63A 4P MCCB complete with accessories etc( For 2 Panel - each panel is1.5 Cum complete with Suitablle incoming and out going termiantions, complete with accessories etc( For 2 Panels - each panel is1.5Cum) Note: Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-3) (1) All cables terminations to be done along with double compression glands and required lugs. as per the direction of Engineer at site." | — | — | — | 3,40,182 | |
| — | 6.00 | — | — | ||
| Supply and erection of 250A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release with extended rotary handle, spereder links(4 nos-02 sets), phase barrier | — | — | — | 1,78,188 | |
| — | 16.00 | — | — | ||
| Supply and erection of 100A 4 pole MCCB with 25KA breaking capacity with Adjustable thermal magnetic release with extended rotary handle, with spereder links(4 nos-02 sets), phase barriers | — | — | — | 99,008 | |
| — | 16.00 | — | — | ||
| Supply and erection of 63A 4 pole MCCBs with 16 KA breaking capacity with Adjustable thermal magnetic release with extended rotary handle, with spereder links(4 nos-02 sets), phase barriers | — | — | — | 64,560 | |
| — | 6.00 | — | — | ||
| Digital multi function panel meter with RS485 communication port. | — | — | — | 42,060 | |
| — | 37.00 | — | — | ||
| Supply & erection of 8-way Double door (SPN) distribution boards (Sleek type) | — | — | — | 33,744 | |
| — | 41.00 | — | — | ||
| Supply & erection of 12 way SPN double door distribution board | — | — | — | 70,807 | |
| — | 58.00 | — | — | ||
| Supply & Erection of 25A DP RCCB with 30mA sensitivity | — | — | — | 1,25,454 | |
| — | 42.00 | — | — | ||
| Supply and Erection of 40A, C-curve FP MCB with 10KA breaking capacity | — | — | — | 46,620 | |
| — | 46.00 | — | — | ||
| Supply and fixing of 40 amp 4pole 30mA RCCB as per the direction of the engineer at site. | — | — | — | 1,39,840 | |
| — | 180.00 | — | — | ||
| Supply & Erection of 6/10/16/20/25/32A, C-curve DP MCBs with 10KA breaking capacity | — | — | — | 81,360 | |
| — | 424.00 | — | — | ||
| Supply & Erection of 6/10/16/20/25/32A, C-curve SP MCBs with 10KA breaking capacity | — | — | — | 58,936 | |
| — | 3.00 | — | — | ||
| Supply, fixing, connecting, testing & commissioning of Power Analyzer for monitoring frequency | — | — | — | 2,05,740 | |
| — | 4.00 | — | — | ||
| Supply of auto weld energy saver for welding transformer with input current upto 63Awith contactor | — | — | — | 57,012 | |
| — | 2.00 | — | — | ||
| Supply and erection 2KVA Transformer , 230/110 V Power supply unit for Waist level LED lighting | — | — | — | 41,376 | |
| — | 1.50 | — | — | ||
| Supply and erection of fabricated small parts steel (Galavanised). | — | — | — | 1,37,992.5 | |
| — | 1.00 | — | — | ||
| Supply of 3.5 digit Backlit LCD Hand Held True Rms Clamp Meter | — | — | — | 7,140 | |
| — | 1.00 | — | — | ||
| Supply of Hand Driven Generator type Four terminal Analog Earth Resistance Tester (Range: 0-100 Ohm). | — | — | — | 8,212 | |
| — | 2.00 | — | — | ||
| Supply and erection of 16 M (clear height) High mast with lowering & rasing motorized unit, lantern carriage assembly suitable for fixing 10 luminares and its control gear box, lighting fixial arrangement for fixing aviation light and foundation bolts on provided foundation (excluding luminares and CG boxes) as per specification. Makes: | — | — | — | 4,90,112 | |
| — | 2.00 | — | — | ||
| Supply and erection of control panel housing suitable control circuit for the operation of the mast complete with switchgears, electronic timer with contactor circuit etc . It shall also consist of suitable control for the power tool motor. | — | — | — | 92,562 | |
| — | 2.00 | — | — | ||
| Supply , Design & Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour indulding suitable foundation bolts manufactured from special steel along with nuts, washers, anchor plate and template ,Ts 600 / 30 mm diameter / 850 mm long length of foundation boltsand other accessories and provide the 50 dia PVC pipe of cable internet for opposite side column | — | — | — | 1,65,000 | |
| — | 2.00 | — | — | ||
| Supply and erection of of LED type single dome aviation obstruction light. | — | — | — | 7,182 | |
| — | 30.00 | — | — | ||
| Provision of fencing panels for High mast structures with size 2 M height as per the directions of the engineer at site. | — | — | — | 44,430 | |
| — | 20.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 200 W LED Flood light fixture complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 1,73,700 | |
| — | 1.00 | — | — | ||
| Design, Supply and erection , connecting, testing & commissioning of 50 KVA Dg set with AMF Panel | — | — | — | 6,99,999 | |
| — | 7.00 | — | — | ||
| Supply and fixing, Transportation of Sheet iron Junction Box for 4Core 120sqmm Cable termination with 250A suitable copper busbar capacity JB of size 18x18"X12" | — | — | — | 54,600 | |
| — | 4.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 400mm sweep wall mounted fan complete. | — | — | — | 9,480 | |
| — | 20.00 | — | — | ||
| Supply & erection of 1 inch PVC flexible pipe | — | — | — | 400 | |
| — | 16.00 | — | — | ||
| "Supply of LED Solar DC Street Light Model Number PL IBSL 20WDC with 6 Meter Hot Dip Galvanized Tubular Pole Made with Bottom 90 OD 3 mm Thick Middle 76mm OD 2MM thick and top 60mm od with 2mm thick along with 200mm x 200m base plate and 4 numbers of J bolts for mounting the Tubular Pole. The Pole is welded with MS Powder Coated Battery box and Light Mounting arm of 1 Meter Long Capacity of the LED Light:m20Watt Auto Dusk to Dawn with built in MPPT Charge Controller of 20 Amp/12 Volt Capacity Li Fe Po4 (Lithium Ferro Phosphate) Battery Capacity 12Volts 18Amp Hour Battery Built in in the Street Light Fitting It self Solar Photo Voltaic Panel: 100Watt Peak 12 Volt Mono Crystalline Solar Photo Voltaic Panel Make: Green Star/ or any reputed Cable: 4 Sqmm 2Core Make: Polycab Hardware: Stain less steel " | — | — | — | 4,26,720 | |
| — | 16.00 | — | — | ||
| Digging suitable hole, erection of Solar Street Light and back filling with Concrete | — | — | — | 42,000 | |
| — | 4.00 | — | — | ||
| Design,Supply,Erection, testing and commissioing of 10KVA/240V/60A Automatic change overcontrol panel for color light signalling, 3 independent single phase 240V AC supplies with allrelated accessories -rotary selector switchwith air break contactors,MCCBs, MCBs, LEDs,alarm buzzer, alarm resetmicro switch etc,. As per RDSO latest specTI/SPC/CLS/0020 (12/02)( with A&C Slip no:1 to 4)or latest if any , | — | — | — | 1,92,040 | |
| — | 60.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of recess 15 W LED Round Down lighters with diffuser and electronic driver complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 38,280 | |
| — | 10.00 | — | — | ||
| Supply & erection of 300W LED flood lights | — | — | — | 1,61,095 | |
| — | 1.00 | — | — | ||
| Supply of LED Light Tower as per the Specifications attached. Make: ASKA or Equivalent. Note: Material to be delivered at various locations of South central Railway, the detailed quantity and consignee address are attached as delivery schedule. (Accepted Firm's offer Make: ASKA) | — | — | — | 4,46,450 | |
| — | 10.00 | — | — | ||
| Supply and fixing of Occupancy Infrared motion sensor 2 module similar to Model no.6772 51 of Legrand make or equavalant Havells/GM/L&T/Havells make with all necessary accessories complete. | — | — | — | 13,970 | |
| — | 9.00 | — | — | ||
| Supply and Erection of cable Termination Jn.box made-up of thermoplastic suitable for termination of 25 / 35 / 50sq.mm cables with IP 55 / IP 65 protection the suitable clamping arrangements for fixing to pole or wall. | — | — | — | 48,289.5 | |
| — | 1.00 | — | — | ||
| Removing of 5 KWP Solar plant duly removing solar panels and structure including breaking of foundations | — | — | — | 35,400 | |
| — | 1.00 | — | — | ||
| Re-Erection of 5 KWP Solar plant including foundations (Required DC Cables and AC Cables your scope) | — | — | — | 53,100 | |
| — | 1.00 | — | — | ||
| Removing of 10 KWP Solar plant duly removing solar panels and structure including breaking of foundations | — | — | — | 70,800 | |
| — | 1.00 | — | — | ||
| Re-Erection of 10 KWP Solar plant including foundations (Required DC Cables and AC Cables your scope) | — | — | — | 1,06,200 | |
| — | 300.00 | — | — | ||
| Supply and Erection of DC Cables from Solar Panels to DC Box | — | — | — | 42,480 | |
| — | 31.00 | — | — | ||
| Supply & Erection of SMC 4 terminal junction Box with Accessories | — | — | — | 20,801 | |
| — | 4.00 | — | — | ||
| Supply of Digital Clamp Meter-27-Auto-BL-Meco | — | — | — | 5,944 | |
| — | 2.00 | — | — | ||
| Supply of Digital Earth Tester--CIE DET 2000 | — | — | — | 8,850 | |
| — | 2.00 | — | — | ||
| Supply of Digital InsulationTesters 2.5kV - 20 GOhms DIT 918 | — | — | — | 14,358 | |
| — | 2.00 | — | — | ||
| Supply of compact tool kit containing a good quality tool bag of Stanley make or itsequivalent in taparia make along with tools with specifications asper the list enclosed Accepted firm offer make : As per Tender,Purchase proof will be along with supply,Sample is to be proved before bulk supply | — | — | — | 11,564 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .