Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹13.6 L+₹71,057 (5.51%)Rejected-Finance | L2 | Rejected-Finance Error in Comparative Statement Generated | |
| 3 | L3₹13.6 L+₹73,952 (5.74%)Rejected-Finance GORAKHPUR UTTAR PRADESH | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | L3 | Rejected-Finance Rejected | |
| 4 | L4₹13.7 L+₹80,753 (6.27%)Rejected-Finance | L4 | Rejected-Finance Error in Comparative Statement Generated | |
| 5 | L5₹13.9 L+₹1.0 L (8.06%)Rejected-Finance SUMEL BAMANWAS SWAI MADHOPUR | L5 | Rejected-Finance Rejected |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Faridkot
GE Faridkot Military Station
Repair/maint of misc B/R works in restricted area under AGE B/R (P-1) at Faridkot Mil Stn
2022_MES_566160_2
GE FRD-61/2022-23
Open Tender
Civil Works
Item Rate
240 days
GE Faridkot
Class E Category a i
8 documents required · 8 mandatory
₹500
GE Faridkot
₹30,000
Yes
7 Feb 2023
7 Jan 2023
23 Jan 2023
7 Jan 2023
21 Jan 2023
14 Jan 2023
Amount
Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed
M&L for 100mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregates) as in sub base in flooring, finishing surfaces even and fair complete all as specified and directed .
M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .
M&L for 75 mm thick cement concrete 1:3:6 type C2( using 40mm graded crushed stone aggregates) as in plinth protection/path, finishing surfaces even and fair complete all as specified and directed .
M&L for forming construction joints 30mm deep x 10mm wide, filled with sealing compound, grade 'A' complete all as specified and directed ..
Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed .
M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 using WPC on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed . Note:- WPC shall be measured and paid separately as "Supply only"
M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for Rendering 10mm thick in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying anti rust remover on existing exposed reinforcement surfaces and applying two coats of anti rust paint after cleaning the surfaces of reinforcement complete all as specified and directed.
M&L for hard drawn steel wire fabric, weighing not exc 4kg/sqm,cut to lengths,bents to shape required and tying with and including mild steel wire(annealed) not less than 0.9mm in dia complete as specified and directed.
Supply only integral water proofing compound complete all as specified and directed .
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kg per square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately).
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed .
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed .
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of white wash complete all as specified and directed .
M&L for complete removal of existing treatment of old decorated surfaces of walls by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts, treating oil & greasy spots,filling depression to make smooth surfaces with wall care putty and applying two coats of Acrylic smooth exterior paint over and including one coat of exterior primer, using hand rollar complete all as specified and directed.
M&L for preparation of newly plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed .
M&L for complete removal of existing treatment of old decorated surfaces of ceiling by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying two coats of white wash complete all as specified and directed.
M&L for Reinforced Cement Concrete 1:1.5:3 (using 20 mm graded crushed stone aggregates) as in chajjas etc complete all as specified and directed.
M&L for use and waste of form work to chajjas and similar items including edges for any height of building,surface rough finished complete all as specified and directed .
M&L for use and waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs, n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n. exc 20cm wide fair finished surface complete all as specified and directed
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .
S&F Glazed ceramic coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed .
M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in flooring complete all as specified and directed.
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed
M&L for Machine cut kota stone slab flooring, 20-25 mm thick , set and jointed in cement slurry over & including 20 mm thick screed in cement mortar 1:6 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
All as per Ser item No 35 here-in-before but except kota stone
M&L Machine cut kota stone slab 18 to 20 mm thick as in skirting,riser of steps,dado and like , set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
S&F Machine pressed precast concrete interlocking paver blocks,any shape and size, confirming to IS-15658-2006 of 60mm thickness,M-35 grade, laid with grey cement and pigment complete all as specified and directed .
All as per Ser item No 38 here-in-before but except paver blocks complete all as specified and directed .
M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base & mass concrete complete all as specified and directed .
Taking down eaves gutters and rain water pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .
S&F PVC (SWR) bends, any radius ,110mm bore complete all as specified and directed.
S&F in repair MS powder coated decorative drapery rod (colour as approved) 20mm dia of approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.
Taking up or down 15mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
Taking up or down 20mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
S&F Galvanised steeI tubing,15mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
All as per Ser item No 50 here-in-before but except tubes.
S&F Galvanised steeI tubing,20mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
All as per Ser item No 52 here-in-before but except tubes.
S&F in repair Stop valve/angle ball, cast copper alloy,chromium plated, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 20mm bore complete all as specified and directed.
S&F in repair pillar taps,fancy type,chromium plated ,cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed
S&F in repairs Cast iron floor trap, long neck, 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .
Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but n.exc 2sqm each & refixing the shutter in same opening including easing and adjusting complete all as specified and directed
S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed
M&L for PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed
S&F 30 mm thick 2nd class hard wood, plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed
S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete with glazing bars dovetailed or welded complete all as specified & directed.
S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete without glazing bars dovetailed or welded complete all as specified & directed.
M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
S&F factory made box type steel ventilators ,fixed type with sash bars, dovetailed or welded complete all as specified & directed.
S&F Framed work such as grills, gratings etc. with ends of bars shoulderd and/or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,cooler stand and similar work conforming to Fe290, Gde-E-165 complete all as specified and directed.
S&F Solid wood moulded grain printed PVC door frame of size 50mm x 95 mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. square tube, egdes will be painted to match printed sheets complete all as specified and directed .
S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Woodgrain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.
S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .
S&F 100mm mild steel butt hinges, medium weight,cold rolled complete all as specified and directed.
S&F aluminium anodised barrel tower bolts,150 mm long of extruded section, fixed to doors with screws complete all as specified and directed .
S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .
M&L in repair for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for preparation of old steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed .
Demolition of concrete (un-reinforced) as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, roof staging,sunken areas and similar suspended work complete all as specified and directed.
M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerbs or mud stops and likes, rounded or chamfered angles complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces as in roof complete all as specified and directed . Note : WPC will be measured and paid separately
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including lime concrete and connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed.
S&F in repair 10 litres PVC,valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F vitreous china wash hand basin, size 550x400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings & waste pipe complete all as specified and directed .
S&F PVC connection, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair Grating doom, 100 mm dia of PTMT (minimum weight 25gms) complete all as specified and directed
S&F in repair brass chromium plated shower rose 125mm size with shower arm 15mm size, 195mm long with bend of 45 degree with flange all as specified and directed.
S&F Towel rail, 600mm long of PTMT, fixed with and including chromium plated brass screws and wooden and plastic cleats ( minimum weight 170gms ) complete all as specified & directed. Note :- A Sum of Rs.9395.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 23 (Schedule of credit) of Tender Documents.
M/S BSS AND SONS
MS JAIN PAINT AND HARDWARE STORE
Vinod Kumar Bajaj
RAJINDRA AIR CONDITINOR FABRICATORS
NAV DURGA CONSTRUCTION CO
GS and Co
ARORA CONSTRUCTION CO.
Bidder Name
Vinod Kumar Bajaj
M/S RAJESH KUMAR and CO.
MS JAIN PAINT AND HARDWARE STORE
M/S BSS AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .