REPAIRS TO TILING, PLASTERING, KITCHEN PLATFORM, GRANITE ETC., AT ORC, BOLTON ROAD AND CAW UNDER GE (AF) HAKIMPET

Amount

Demolition of brick work or stone/ boulder or block masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc.

M&L for brick work with flyash brick, straight or curved on plan exc 6m mean radius built in cement mortar 1:4

M&L for brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for and removed debris outside MD land..

M&L for fair finished flat form work to sides and soffits of floor or roof beams, lintels, cantilevers, RCC slab, shelves etc including supports etc.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

M & L for Reinforced Cement Concrete Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded granite stone aggregate) in sub base of floorings.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness and removed debris outside MD land.

M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting.

M&L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/ Rectangular) design area exceeding 0.06 sqm but not exceeding 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F Non Skid colored ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

All as per Item here-in-before but in skirting/ dado

M&L for Granite(of any type) work (table rubbed and polished) of 20 mm th in steps, jambs, pillars, window- cills,cooking platforms and like over cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations

Taking down or up steel/GI water tubing and connections including cleaning for refixing or removal from site for 15 mm bore of pipe complete all as specified.

S & F High density polyethylene pipes (HDPE)15mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc complete all as directed

S&F of stainless steel kitchen sink with draining board made of 304 grade stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160 mm including taking down old sink complete all as directed .

S&F 40 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S &F in repairs CP Bib taps, 15mm bore, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed

S/F CP stop cock/angular stop cock 15mm bore with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repair PVC (SWR) floor trap incl grating, set and jointing with salvent cement 75mm dia

M&L for Vitrified light coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match.

All as per Item here-in-before but on verticle surfaces.

M & L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

All as per Item here-in-before but on verticle surfaces.

M & L 40 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) in surfaces finished even and smooth without using extra cement.

M&L for 75mm thick, PCC 1:3:6, Type C1, using 20mm graded aggregate as in Plinth protection/ base to path & hardstanding surface etc.

Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. and removed debris outside MD land.

M & L for rendering 15mm thick on fair faces of brick work or concrete or stone surfaces in cement mortar 1:6 , finished even and smooth without using extra cement

M&L for rendering 15mm thick on fair faces of brick work, stone or concrete surfaces in cement mortar 1:4 using WPC @ 3% by wt. of cement, complete all as specified and as directed (Note:- WPC will be measured and paid separately)

M&L for 10 mm thick plastering in CM 1:3 on fair faces of brick work or concrete surface as in ceiling including finishing the surface even and smooth without using extra cement.

Supply only water proofing compound

M&L for preparation of new plastered surface of walls and applying two coats of distemper complete over a coat of primer all as specified and as directed.

M&L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L preparation of new plastered surface and applying two coat of cement based paint over a coat of primer complete all as specified and as directed.

M&L for preparing old plastered or unplastered wall surfaces and applying two finishing coat of white wash all as specified.

M&L for preparing old plastered or unplastered surfaces and applying one finishing coat of white wash all as specified.on ceiling.

M&L for preparing old plastered or unplastered surfaces of wall and applying one coat of cement based paint complete all as specified and as directed.

Renewing glazed/floor tiles in patches area not exceeding 5 Sqm including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old tiles complete.(Screed bed will measured and paid separately)

Dismantling AC/steel corrugated, semi corrugated sheets in roof covering complete all as specified and directed.

M & L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts

M & L Asbestos Cement two piece adjustable plain wing ridge 6 mm thick and fixed with L hook or Cranked bolts

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L Preparing new steel Surfaces of any any description over 10cm width or girth and appling two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (Fe 410w (Gde-E-250) quality-A) including distance pieces, cleats etc.

SRI LALITHA CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

VACON INFRASTRUCTURES