Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC OPPOSITE GHOOM DRC PO GHOOM DISTT DARJEELING WB PIN 734 102 | DARJEELING | WEST BENGAL | 734102 | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER | |
| 2 | L2₹10.2 L+₹8,743.52 (0.87%)Rejected-Finance | L2 | Rejected-Finance BEING L2 BIDDER | |
| 3 | L3₹10.2 L+₹12,590.39 (1.25%)Rejected-Finance | L3 | Rejected-Finance BEING L3 BIDDER | |
| 4 | L4₹10.4 L+₹28,876.73 (2.87%)Rejected-Finance | L4 | Rejected-Finance BEING L4 BIDDER | |
| 5 | Rejected-Technical | - | Rejected-Technical Rejected, as the firm is not enlisted in the required category b(i). |
| Sl No | Description | Qty | Unit | SANJAY KAUSHIK L3 | BIMAL BHATTRAI L2 | HIRA SINGH L4 | Damdoo Bhutia L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Supply, install, commissioning and testing of LT panel board, outdoor cubical type, from CPRI approved panel fabricator, front and back, both side openable type, fixed with butt hinges and locking arrangements with latches, fabricated with CRCA sheet of 2mm thickness for inner sheet and 3.15mm for outer sheet, thick hinged type door for individual MCCBs/ MCBs/ premium rubber gasket, supported on 50x50x6mm angle iron and t section frame, dust and vermin proof complete with COPPER busbars, 4 nos, 300A rated capacity mounted on porcelain insulators, totally enclosed chamber for protection from 3 phase 415V supply, with suitable rating of copper frlsh wires for control wiring, suitable for mounting on PCC foundation with suitable size of nuts, washers and bolts. Panel shall be powder coated RAL 7032 along with 7 tank processing. Angle iron frame shall be painted with black synthetic enamel paint over a paint of red oxide primer complete, connecting UG cables with suitable size glands and lugs to accomodate the components complete all as specified and as directed by Engineer-in-charge.. [Note:- Drawing & design as per CPRI norms shall be duly recommand by AGE EM and approved from AGE (I).
(ii) Certificate from panel builder shall be submitted to the department]
INCOMING :-
(a) 250A, 4P, 36KA, MCCB - 01 Nos- 1 TM MCCB Adjustable overload settings: 0.67 - 1.0 x In Ics=100% Icu (EXTENDED ROM & SPREADER LINK ) Make - Cat part No DZ4F0250DXD1AOOOO of LK
(b) Auxillary Contact/ Trip Alarm Contact. (c) LED Indicating Lamps R, Y, B. (d) LED Indicating Lamps (ON OFF TRIP)
(e) MODBUS RTU to TCP/IP Gateway. (f) Digital MFM - 1 set MFM 4405 LED meter Cl 0.5S with RS485 - 01 pcs
(g) 250/5A CT COIL - 03 Pcs
(h) 1-6A SP C Curve 10KA MCB (protection For LED lamps & MFM) with True contact indication for individual pole - 03 pcs
OUTGOING :-
(a) 100A 4P 18KA MCCB - 02 Nos, Ics=100% Icu with Adjustable Overload Setting: 0.8 - 1.0 x In. Make - Cat Part No - CM90518OOFO of LK.
(b) Auxillary Contact/ Trip Alarm Contact.
(c) LED Indicating Lamps (ON OFF TRIP)
(d) 1-6A SP C Curve 10KA MCB (protection For LED lamps) with True contact indication for individual pole
e) 63A 4P 18KA MCCB - 03 Nos, Ics=100% Icu with Adjustable Overload Setting: 0.8 - 1.0 x In.
(f) Auxillary Contact/ Trip Alarm Contact.
(g) LED Indicating Lamps (ON OFF TRIP)
(h) 1-6A SP C Curve 10KA MCB (protection For LED lamps) with True contact indication for individual pole
(j) Outgoings: 32A 1P 10KA MCB -1 no (32A 10KA MCB C Curve with True contact indication for individual pole. Make - Cat Part No BB10320C of LK or equivalent to ABB/Siemens | 1 | Each | 3,25,760 ₹3,25,760 | 3,28,420 ₹3,28,420 | 3,29,150 ₹3,29,150 | 3,22,800 ₹3,22,800 Lowest |
| 2.00 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge. | 90.9 | Cum | 356 ₹32,360.4 | 352.46 ₹32,038.61 | 351 ₹31,905.9 | 350 ₹31,815 Lowest |
| 3.00 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed by Engineer-in-charge. | 90.11 | Cum | 151 ₹13,606.61 | 147 ₹13,246.17 | 145 ₹13,065.95 Lowest | 148 ₹13,336.28 |
| 4.00 | Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge. | 0.79 | Cum | 331.54 ₹261.92 | 336.82 ₹266.09 | 334 ₹263.86 | 330 ₹260.7 Lowest |
| 5.00 | Taking out old unserviceable underground cable PVC insulated, PVC sheathed armored heavy duty aluminum conductor LT 1100 v grade UG Cable of any size, wall and trenches etc after disconnecting, complete all as per specified and as directed by Engineer-in-charge. | 450 | RM | 18.45 ₹8,302.5 | 20 ₹9,000 | 17 ₹7,650 Lowest | 18 ₹8,100 |
| 6.00 | Supply and lay in trenches, fixed to wall/pole UG Cable XLPE insulated screened PVC beded galvanised steel strip or wire armoured heavy duty electric cable with multi stranded Aluminium conductor , 1100V grade of size 10 sqmm 2 core, complete all as per specified and as directed by Engineer-in-charge. | 240 | RM | 486 ₹1,16,640 | 475 ₹1,14,000 | 511 ₹1,22,640 | 470 ₹1,12,800 Lowest |
| 7.00 | Supply and lay in trenches, fixed to wall/pole UG Cable XLPE insulated screened PVC beded galvanised steel strip or wire armoured heavy duty electric cable with multi stranded Aluminium conductor , 1100V grade of size 25 sqmm 4 core, complete all as per specified and as directed by Engineer-in-charge. | 210 | RM | 805 ₹1,69,050 | 798 ₹1,67,580 | 801 ₹1,68,210 | 780 ₹1,63,800 Lowest |
| 8.00 | M&L in replacement of 40mm dia steel tubes (light grade) galvanised with fittings, clamp, nuts, bolta and washers and laid/fix in trenches/wall/pole for protection of underground cable, complete all as per specified and as directed by Engineer-in-charge. | 16 | RM | 766 ₹12,256 | 759 ₹12,144 | 770 ₹12,320 | 755 ₹12,080 Lowest |
| 9.00 | Supply and lay in trenches, fixed to wall/pole DWC Pipes (Double Wall Corrugated) of dia. 50 mm type 450 (450N) as per IS:16025 Part 24 standard for carrying UG cable, complete all as per specified and as directed by Engineer-in-charge. | 404 | RM | 80 ₹32,320 | 76 ₹30,704 Lowest | 101 ₹40,804 | 100 ₹40,400 |
| 10.00 | M&L for cutting existing road/hard standing not exc. 20 x 45 cm in width and depth, geting out excavated material for laying of cable for protection under GI pipe, returning filling and well ramming watering finish surface 10 cm from top using PCC 1:3:6 using 20 mm graded stone aggregate; including removing surplus soil complete all as per specified and as directed by Engineer-in-charge. | 10 | RM | 771 ₹7,710 | 763 ₹7,630 | 774 ₹7,740 | 760 ₹7,600 Lowest |
Tender Value
₹9.2 L
EMD Value
₹18,400
Closing Date
6 Aug 2026, 6:00 pmClosed
AGE I DARJEELING
AGE I DARJEELING JALAPAHAR CANT DIST - DARJEELING
REPAIR/MAINT/IMPV OF LT UG CABLE, LT PANEL/FPB, JUNCTION BOXES AND OTHER ALLIED WORKS AT LEBONG UNDER AGE (I) DARJEELING
2026_MES_779067_1
8278/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
LEBONG
AS PER NIT
9 documents required · 9 mandatory
₹500
AGE I DARJEELING
₹18,400
Yes
21 Aug 2026
16 Jul 2026
8 Aug 2026
16 Jul 2026
6 Aug 2026
31 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, install, commissioning and testing of LT panel board, outdoor cubical type, from CPRI approved panel fabricator, front and back, both side openable type, fixed with butt hinges and locking arrangements with latches, fabricated with CRCA sheet of 2mm thickness for inner sheet and 3.15mm for outer sheet, thick hinged type door for individual MCCBs/ MCBs/ premium rubber gasket, supported on 50x50x6mm angle iron and t section frame, dust and vermin proof complete with COPPER busbars, 4 nos, 300A rated capacity mounted on porcelain insulators, totally enclosed chamber for protection from 3 phase 415V supply, with suitable rating of copper frlsh wires for control wiring, suitable for mounting on PCC foundation with suitable size of nuts, washers and bolts. Panel shall be powder coated RAL 7032 along with 7 tank processing. Angle iron frame shall be painted with black synthetic enamel paint over a paint of red oxide primer complete, connecting UG cables with suitable size glands and lugs to accomodate the components complete all as specified and as directed by Engineer-in-charge.. [Note:- Drawing & design as per CPRI norms shall be duly recommand by AGE EM and approved from AGE (I).
(ii) Certificate from panel builder shall be submitted to the department]
INCOMING :-
(a) 250A, 4P, 36KA, MCCB - 01 Nos- 1 TM MCCB Adjustable overload settings: 0.67 - 1.0 x In Ics=100% Icu (EXTENDED ROM & SPREADER LINK ) Make - Cat part No DZ4F0250DXD1AOOOO of LK
(b) Auxillary Contact/ Trip Alarm Contact. (c) LED Indicating Lamps R, Y, B. (d) LED Indicating Lamps (ON OFF TRIP)
(e) MODBUS RTU to TCP/IP Gateway. (f) Digital MFM - 1 set MFM 4405 LED meter Cl 0.5S with RS485 - 01 pcs
(g) 250/5A CT COIL - 03 Pcs
(h) 1-6A SP C Curve 10KA MCB (protection For LED lamps & MFM) with True contact indication for individual pole - 03 pcs
OUTGOING :-
(a) 100A 4P 18KA MCCB - 02 Nos, Ics=100% Icu with Adjustable Overload Setting: 0.8 - 1.0 x In. Make - Cat Part No - CM90518OOFO of LK.
(b) Auxillary Contact/ Trip Alarm Contact.
(c) LED Indicating Lamps (ON OFF TRIP)
(d) 1-6A SP C Curve 10KA MCB (protection For LED lamps) with True contact indication for individual pole
e) 63A 4P 18KA MCCB - 03 Nos, Ics=100% Icu with Adjustable Overload Setting: 0.8 - 1.0 x In.
(f) Auxillary Contact/ Trip Alarm Contact.
(g) LED Indicating Lamps (ON OFF TRIP)
(h) 1-6A SP C Curve 10KA MCB (protection For LED lamps) with True contact indication for individual pole
(j) Outgoings: 32A 1P 10KA MCB -1 no (32A 10KA MCB C Curve with True contact indication for individual pole. Make - Cat Part No BB10320C of LK or equivalent to ABB/Siemens | 1 | Each | - | - |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge. | 90.9 | Cum | 1 | ₹90.9 |
| 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed by Engineer-in-charge. | 90.11 | Cum | - | - |
| 4 | Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge. | 0.79 | Cum | - | - |
| 5 | Taking out old unserviceable underground cable PVC insulated, PVC sheathed armored heavy duty aluminum conductor LT 1100 v grade UG Cable of any size, wall and trenches etc after disconnecting, complete all as per specified and as directed by Engineer-in-charge. | 450 | RM | - | - |
| 6 | Supply and lay in trenches, fixed to wall/pole UG Cable XLPE insulated screened PVC beded galvanised steel strip or wire armoured heavy duty electric cable with multi stranded Aluminium conductor , 1100V grade of size 10 sqmm 2 core, complete all as per specified and as directed by Engineer-in-charge. | 240 | RM | - | - |
| 7 | Supply and lay in trenches, fixed to wall/pole UG Cable XLPE insulated screened PVC beded galvanised steel strip or wire armoured heavy duty electric cable with multi stranded Aluminium conductor , 1100V grade of size 25 sqmm 4 core, complete all as per specified and as directed by Engineer-in-charge. | 210 | RM | - | - |
| 8 | M&L in replacement of 40mm dia steel tubes (light grade) galvanised with fittings, clamp, nuts, bolta and washers and laid/fix in trenches/wall/pole for protection of underground cable, complete all as per specified and as directed by Engineer-in-charge. | 16 | RM | - | - |
| 9 | Supply and lay in trenches, fixed to wall/pole DWC Pipes (Double Wall Corrugated) of dia. 50 mm type 450 (450N) as per IS:16025 Part 24 standard for carrying UG cable, complete all as per specified and as directed by Engineer-in-charge. | 404 | RM | - | - |
| 10 | M&L for cutting existing road/hard standing not exc. 20 x 45 cm in width and depth, geting out excavated material for laying of cable for protection under GI pipe, returning filling and well ramming watering finish surface 10 cm from top using PCC 1:3:6 using 20 mm graded stone aggregate; including removing surplus soil complete all as per specified and as directed by Engineer-in-charge. | 10 | RM | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
BOQ_872594.xls
BOQ • 0.57 MB
8278TENDERDOCUMENTS.pdf
Tender Documents • 2.83 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .