CWEK/TOKEN-102/864 EWS/2025-26

Amount

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc 1.50 sqm but n exc 4 sqm each complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed

S&F for in repair factory made 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauze (Without sash bar) etc as specified in SSR Pt- I Sec -8 clause 8.20 (a) complete all as specified and directed.

Supply only galvanised stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

M&L for preparing of new wooden surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint, over one coat of pink primer complete all as specified and directed by the Engineer-in-Charge

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening complete all as specified and directed by EIC .

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed by Engineer-in-Charge.

S&F 300mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by the Engineer-in-Charge.

S&F aluminium anodised barrel tower bolt of extruded section of size 150 mm complete all as specified and directed by the Engineer-in-Charge.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush compete (overall length of cover plate 150mm) complete all as specified and directed by the Engineer-in-Charge.

S&F stainless steel butt hinges of size 100mm long for fixing of door shutter etc complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description over 10cms width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L second class hard-wood in scantlings frame work including dismantling old unserviceable timber scantlings of any description in any position complete all as specified.

S&F mild roof structural steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlins and fastening including distance pieces etc. including dismantling of wrought iron or mild steel work of any description not specifically provided, complete all as specified and directed.

Dismantling corrugated or semi corrugated sheets in wall cladding or roof coverings including ridges and make good of aluminium earthing strips after fixing of sheets complete all as specified and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap & fixed with screws and washers as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.63mm thick galvanised plain mild steel sheeting in ridge, valley gutters etc with two corrugation side lap & fixed with screws and washers as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles, of size 450mmx300 mm and 7mm thick, as in skirting, dado set and jointed with neat cement slurry over and including rendering 10 mm thick on wall and the like to receive tile in cement mortar 1:4, including pointing in white cement with pigment to match the shade of tiles complete all as specified.

M&L coloured glazed ceramic tiles in vertical surface 450mmx300mm and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10cm thick backing coat in CM 1:4, including dismantling old unserviceable floor, hearth or wall tilling including cement mortar bedding (but not backing) etc. complete all as specified and directed.

M&L non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of mortar 15 mm thick (average thickness) for laying floor finishes in cement mortar 1:4 and pointed in white or coloured cement to match laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

M&L 20-25 mm thick machine cut pre polished Kota stone slab flooring, landing, steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry @3Kg/sqm mixed with pigment to match with shade of slab including rubbing and mirror polishing complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 set, jointed and pointed in neat cement slurry including demolition/ old unserviceable of tiles complete all as specified and directed.

M&L for grinding with machine grinder of granite stone /Kota topping with marble aggregate /marble Stone slab / Kota slab etc. as in old floor, wall, cooking platform, shelf etc & polishing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base over rammed earth complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement including making joints every 2.5m and corner filled with bitumen 85/25 complete all as specified.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, ramps not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of brick work , built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc including demolition of precast RCC articles and disposal of debris out of MoD land complete all as specified and directed.

M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified and directed.

All as per ser item No 40 here-in-before but except bricks. Note: Old unserviceable burnt clay bricks retrieved from demolition under item No 39 here-in-before shall be used.

Taking down cement of cement lime plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by the Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on stone masonry / brick surface finished even and smooth without using extra cement with liquid water proofing admixture complete all as specified. Note : WPC shall be measured and paid separately.

M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick surfaces complete all as specified and directed by Engr-in-Charge..

Supply only `Liquid Water Proofing Compound complete all as specified and directed .

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a chalk white of primer, complete all as specified and directed.

M&L for preparation of New plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coats of oil emulsion distemper on wall priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and directed.

M&L for writing letters or figures (block, Roman, Italic or Indian) exceeding 15 centimetre high but not exceeding 30 centimetre high etc with synthetic enamel paint including necessary scaffolding up to four storeys height of bldgs if required, Shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed.

S&F steel window/ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, complete including hinges, tower bolt, handle , grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC blocks, including plain/figured glass 3.0mm thick and wire mesh 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as shown on latest drg by competent auth/ CE 31 Zone/ as per drg in CA including taking down existing spoiled and unserviceable windows/ ventilators of any type ( wooden/steel) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L 6mm thick Non Asbestos fibre cement /Prelaminated self embossed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured) to be fixed or inserted to prelaminated Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approximate 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre & Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F in repairs vitreous china squatting pan 'Orissa pattern size 580mmx440mm white with 'P' or 'S' trap and integral foot rest (excluding, flushing cistern and flush pipe) squatting pan including connection 'P' trap and to flushing pipe, anti syphonage pipe and trap set in and including concrete and making good the flooring as per existing specification and taking out existing WC complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white, with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe complete including making good to floor to match with adjoining surface and taking out existing WC complete all as specified.

S&F in repairs PVC valve less syphon action type low level flushing cistern 10 liters capacity with inlet, ball valve, float valve push button type handle including telescopic flush pipe 32 mm dia complete and all as specified.

S&F in repairs vitreous chinaware wash hand basin white, flat back of size 550mmx400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets including 32mm bore PVC waste pipe and CP waste coupling complete and fixed in repair complete all as specified and directed.

S&F in repairs 32 mm dia of flush pipe for low level cistern as in repair complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

M&L for cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipe including disconnecting existing water tanks and refixing in position after cleaning for 500/1000/2000 litres capacity of tank including writing of date of cleaning with stencil pattern complete all as specified and directed by Engr-in-Charge.

S&F in repairs 500 litre capacity rotational moulded triple layered polyethylene water storage tank (cylindrical vertical with closed top) white hoisted and fixed in position including GI tank nipple & brass float valve including dismantling existing water tank and removing from site of any capacity complete and all as specified and as directed by Engineer-in-Charge.

S&F in repairs 1000 litre capacity rotational moulded triple layered polyethylene water storage tank (cylindrical vertical with closed top) white hoisted and fixed in position including GI tank nipple & brass float valve etc. including dismantling existing water tank and removing from site of any capacity. complete and all as specified and directed by Engineer-in-Charge.

M&L for cutting chases for concealed water tubing and making good to facing in cement mortar 1:3, cutting not exceeding 10cm girth all as specified and directed.

Taking up or down GI tubing 15mm bore including cleaning for refixing complete all as specified and directed by Engr-in-Charge

Taking up or down GI tubing 20mm bore complete all as specified and directed by Engr-in-Charge.

S&F 15 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified and directed by Engr-in-Charge.

S&F 20 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 20mm) complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repairs 15mm bore Stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15mm dia CP Angle cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.

S&F in repairs pillar taps, 15mm bore cast copper alloy with cistern head, chromium plated screwed down high pressure with or without lettered hot or cold complete all as specified and directed by Engr-in-Charge.

S&F in repairs soap dish, vitreous china white, approximate size 160mmx 160mmx90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs brass chromium plated Tubular towel rail 20mm dia complete all as specified and directed.

S&F towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed.

M&L for plates of Fe 410 W grade E-250) quality-A in (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.

S&F in repairs 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, : gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F ball bearing for rolling shutters complete all as specified and directed.

M&L for running welding in repairs thickness of metal to be welded n exc 6 mm complete all as specified and directed.

Dismantling structural steel work including doors, gates etc. complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290. Gde-E-165 and framed and hung as gates, rollers for sliding on sliding MS plate including pintle hinges,/Pin type hinges stops, hand-made sliding bolts, etc. complete all as specified and directed. Note:- The doors will be fabricated as per the site requirement.

M&L for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white including 3mm thick lipping and equal to thickness of board as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed.

S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed

S&F continuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electro galvanised complete all as specified and directed

Removing of iron gate of any size and description and refixing of gate and including increase height of gate with hold fast as directed by Engr-in-charge.

Demolition of stone/ boulders masonry built in cement/ cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing ,dressed stone work and pre-cast concrete articles and removing mortar from and cleaning stones/ bricks obtained from masonry of any description, complete all as specified and directed.

M&L PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified.

M&L PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as in bond stone set in CM 1:4 complete all as specified and directed.

Extra over walling hammer dressing with mix depositing on face from straight edge held against the dressed surface n.exc 40mm complete all as specified and directed.

M&L keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:3 complete all as specified and directed.

Supply only PVC (SWR) conduit pipes 100mm dia in any length with rubble ring joints laid in trenches or in floor or as in weep holes complete all as specified.

M&L for boulder filling dry, hand packed tightly, as in back filing of stone masonry complete all a specified.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out concrete embedded portion and making good disturbed ground surfaces complete all as specified and directed.

Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation to post/strut complete all as specified and directed.

M&L for MS work conforming to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete and all as specified and directed.

Dismantling fencing wire/ mesh of any description complete all as specified and directed by Engr-in-Charge.

Supply only chain link fencing complete all as specified and directed.

Fixing only Chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F flat iron of size as directed as in fixing clamps or support to chain link fencing, stiffeners etc fixed with nut and bolts including making necessary holes complete all as specified and directed.

M&L mild steel screw bolts (machine made) 5 to 10mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed.

M&L for complete removal of existing treatment surface externally of wall and applying Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over and including necessary scaffolding up to three storeys height of bldgs, Shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed.

M&L for complete removal of existing treatment internally surface of wall and applying min 1.5 mm thick wall care putty on the surfaces and making surface absolutely smooth and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed.

S&F for 2nd class hard-wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, as per architectural drawings complete all as specified and directed by Engineer-in-Charge.

S&F powder coating of any colour (thickness of powder coating not less than 50 micron anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws, handle, locking arrangement etc. complete all as specified and directed.

S&F powder coating of any colour (thickness of powder coating not less than 50 micron anodised aluminium window and ventilator shutters, fixed type/sliding type/side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc. complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply only galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

M&L 6mm thick non Asbestos fibre cement /Pre Laminated self embossed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38mmx24mmx0.9mm thick, cross tee 8.6mmx24mmx0.9mm and wall angle 19mmx19mmx0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip, including dismantling complete all as specified and directed.

S&F in repairs for wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood including dismantling old unserviceable wooden laminate complete all as per manufacturers' instruction all as specified and directed.

S&F in repair 1.5 mm thick Linoleum sheet, plain coloured, laid dry in floors including stretching, cutting and fitting, complete all as specified and directed

S&F stainless steel butt hinges medium weight 75mm long etc complete all as specified and directed.

S&F 150 mm long extruded aluminium handles fabricated type, anodised all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F 100 mm long Aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling complete all as specified and directed.

S&F 12mm thick toughed glass as in hinged door, partitions automatic door with necessary long solid fancy handle, suitable hinges, locking arrangement, hydraulic floor spring as required, design as approved by GE complete all as specified and directed.

S&F 10mm thick toughed glass cubical as in hinged door, partitions automatic doors with necessary long solid fancy handle, suitable hinges, locking arrangement, hydraulic floor spring as required, design as approved by GE complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded in any mortar complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over 15mm thick in cement mortar 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and waste pipes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm, each bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer (sink/WHB/wall) (any pattern) for mixing hot & cold water screwed down for iron pipe, with or without hand shower and fixed complete all as specified and directed.

S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 500 litres capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling old unserviceable PVC water tanks exc 250 litres and not exc 500 litres capacity etc complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4, type B1 (using 20mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition, use and waste formwork complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L wrought second class hard-wood in scantlings frame work including dismantling of timber scantlings 40 sq. cm and over in section, in any position framed work complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe) including PVC seat cover (closed pattern) and CP health facet , connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including Flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed.

S&F in repairs one piece vitreous china wash down water closet pan with flush cistern (any colour) floor/wall hang type including PVC seat cover (closed pattern) & CP health faucet connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repairs vitreous china squatting pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S&F in repairs 125mm brass chromium plated shower roses including fixing to steel pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash basin of size 550mmx400mm (flat back or angle back type) including brackets cutting and pinning in ends of brackets or erecting stand inclusive 32mm waste fittings, brass, chromium plated for basins, waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement etc complete all as specified and directed.

S&F Wash Hand Basin (Vanity ) long pattern type of 78cmx48cm including all fittings with decorative cabinet with Door/Shutter and 02 No drawers complete all as specified and directed.

S&F in repairs vitreous China oval type wash basin of inclusive 32mm waste fittings, brass, chromium plated ,waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement etc complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes of capacity exc 250 lit but n.exc 500 lit, cleaning and next date of cleaning to be also written including dismantling of existing roof sheets and refixing the same after cleaning water tanks complete all as specified and directed.

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes of capacity exc 500 lit but n.exc1000 lit cleaning and next date of cleaning to be also written including dismantling of existing roof sheets and refixing the same after cleaning water tanks complete all as specified and directed compete all as specified and directed.

S&F in repairs aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F 35mmx10mm laths (fixed straight or diagonally) of 2nd class soft wood clean sawn two way trellises work with 50mm spaces in clear, including 75mmx50mm fillet (notched to take ends of laths) all around and fixed including dismantling of old unserviceable trellis work (Jafri),complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes (two in each door and window) complete all as specified and directed.

M&L 9mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work including dismantling old unserviceable all as specified and directed.

S&F 1.5mm thick Decorative laminate type 1 of surface finish, colour and pattern including necessary fillets/ cornices as approved, fixed with approved adhesive as per manufacturer's instructions, including dismantling old unserviceable complete all as specified and directed.

M&L 18-19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including required teak wood lipping, including dismantling old unserviceable all as specified and directed.

M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc including demolition brick work or stone built complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces finished even and fair without using extra cement including taking down old unserviceable plaster all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.

S&F for framed brackets of angles or tees with web and flanges, tubular pipes cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square/ rectangular)dark polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, including dismantling old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed.

M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigments 30cm x 30cm and 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in CM 1:6 over 75mm thick PCC 1:4:8, type D2 (using 40mm crushed stone aggregate) complete all as specified and directed.

S&F 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275,Including dismantling old unserviceable mild steel sheet complete all as specified.

S&F 0.63 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wails including dismantling old unserviceable mild steel sheet complete all as specified.

S&F in repair 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L type or J type or cranked hook and washer in wall including dismantling old unserviceable fibre glass complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces by using necessary filling compound of Ultratech/Birla white 1mm thick wall care putty to obtain smooth/even surface using sand paper and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer, complete all as specified and directed.

S&F 15mm dia GI tubing (medium grade) with all fitting and fixed to wall and ceiling including taking down old unserviceable GI tubing complete all as specified and directed.

S&F 20mm dia GI tubing (medium grade) with all fitting and fixed to wall and ceiling including taking down old unserviceable complete all as specified and directed.

S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes (two in each door and window) complete all as specified and directed.

M/S RATHER CONSTRUCTION CO (BID ID -3481626)

M/S Tajamul Ah Buchh (BID ID -3480997)

M/S Vivek Gupta and Co (BID ID -3475815)