REPAIR TO JOINERY FALSE CEILING ROLLING SHUTTER AND ALLIED WORKS TO CERTAIN BLDGS IN INSP ORGN AT AUNDH AREA UNDER GE MH AND RH KIRKEE

Amount

Dismantiling of wall and ceiling boards (fibre, pulp, insulation , etc) or insulation boards/slab / blanket , any thickness , including cover fillets all as specified and directed

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required , depth of embedded portion of holdfast exc half bricks and not exc one brick all as specified and directed

M & L for cement concrete 1:2:4 type B using 20mm graded aggregate for filling in holdfast all as directed.

Taking down chowkat without taking off shutter from frame n.exc 1.5 sqm each all as specified and directed.

Taking down chowkat without taking off shutter from frame exc 1.5 and n.exc 4 Sqm each all as specified and directed

Taking down shutters of any description exceeding 1.00 Sqm and n.exc 2.00 Sqm each all as specified and directed.

S &F Pressed steel frame for doors of size 125x 60mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed .

S&F pressed steel frame of size 105x60mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed

M&L PCC 1:3:6 type C-0 using 20mm graded stone aggregate as in filling of pressed steel chowkat all as specified and directed

S&F 30mm thck flush shutters, solid core construction with block board core and plywood face panels , commercial type on both sides all as specified and directed.

S&F 35mm thick(2nd Class hardwood) factory made gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass , etc, sizes of members of shutters as specified in SSR Part I , Section 8 , Clause 8.20 (a) , Supplied and fitted to chowkats all as specified and directed

S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed.

S&F in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves all as specified and directed.

S&F Steel window (any nos of shutter ) with side hung double shutters one side shutter/shutters to receive glass and other side shutter/shutters to receive guage including projecting type hinges with steel handles, and steel peg stays complete with glazing bars /without glazing bars all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed.

S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Demolition stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar.

M&L for Granite slab 20 mm thk machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade incl cutting and polshing as directed by EIC.

Dismantling steel rolling shutter including assembly exceeding 4 Sqm but not exceeding 12 Sqm and repair for proper functioning by replacing rolling assembly and re-erecting the shutter, including straightening, cutting and welding of shutter angles, channels providing proper guides as required and making good, functioning by applying greasing , oiling for smooth and easy movement of the shutter and applying two coats of synthetic enamel paint of matching colour/shade, complete all as specified and directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as directed

S&F powder coated aluminium frame for doors, windows , ventilators and in partition , with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F in repair locking arrangements of CP brass for aluminium doors i.e , by placing new lock 4 lever, vertcal type of 65mm , with triplicate key etc complete all as spfd and directed.

S&F in repairs 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm , all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm , all as specified and directed.

S & F 150 mm size extruded aluminium alloy handles, fabricated type anodised all as directed.

S & F in repairs125 mm size extruded aluminium alloy handles,fabricated type anodised.

S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm all as directed.

S & F aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed length of bolt 300 mm all as directed.

S & F in repairs aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type ) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 300 mm

S & F in repair of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 200mm all as directed.

S & F in repair of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 300mm all as directed.

S&F 100 mm mild steel butt hinges medium weight, cold rolled all as directed.

S&F in repairs 40mm width continuous (paino) hinges, mild steel, bright finish or electrogalvanised all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed in CM 1:6 all as specified.

M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick plastering in cm 1:4 all as specified.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed in CM 1:6 all as specified.

S & F Vitrified ceramic coloured tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6 , set and jointed in neat cement lsurry and pointed in white or coloured cement to mathch the surfaces of tiles.

M&L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handles etc all as specified and directed.

S & F in repairs powder coated aluminium brakets for curtain rods all as specified and directed.

S&F in repairs 20mm Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as specified and directed

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified and directed.

S&F in repairs drawer handles , mild steel , flush drop (65 to 75mmm grip) on 4 screw plate , including lettin in all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

S&F in repairs 150mm rubber door stopper of aluminium alloy body, anodised all as specified and directed.

S&F in repairs vertical type venitian blinds with sliding & revolving track & 100mm wide approved coloured fabric etc complete as directed by Engr-in-charge

M&L snap grid ceiling with 19mm thick semi - perforated edge 60x60cm in ceiling board over GI grid prelude XL 24 mm grid main runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions all as specified and directed .

M&L for false ceiling of plain gypsum board 12mm thick and frame made out of MSGI BPS grade , angle 24mm x24mmx0.43mm, 'T' section 24mmx25mmx0.30mm and main runner 'T' section 24mmx38mmx0.35mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c , hanging with 2.50/3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with painting two coats of plastic emulsion paint over one coat of primer and preparation of surface complete all as specified and directed by the Engr-in-charge.

S&F POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square not exceeding 0.5 Sqm in each pane all as specified and directed .

Hacking out old broken glass, (any thickness, size , qulaity or description) metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one all specified and directed

Supply only Figured glass, pinhead type 4mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed

M&L painting to wooden surfaces of any description over 10 cm width or girth incld prepration of new surface and applying two coat of synthetic enamel paint over one coat of pink primer all as specified.

M&L for Preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete all as specified.

Sunrise Traders

C J Enterprises

vishalconstruction

Shri Sant Cosntruction

kk construction

V.R.PRAJAPATI AND CO.

L.K.R.TIWARI CONSTRUCTION