Loading…
Loading…
Tender Value
₹4.8 L
EMD Value
₹7,800
Closing Date
13 May 2026, 11:00 pmClosed
Directorate of Municipal Administration
Vinayaka KP
Word No-20 Bepar street Prthana Mandira Toilet at TMC Tarikere.
DMA/2025-26/OW/WORK_INDENT56953
DMA/2025-26/OW/WORK_INDENT56953
Open
Other Works
Two Tender Document System(Two Cover)
DMA Town Municipal Council Tarikere
5 documents required · 5 mandatory
should have in the last five years (i.e. 2021-2022 to 2025-2026) achieved in at least one financial year a minimum financial turnover (in all classes civil engineering works only) of Rs 5.67 Lakhs. Approved by CA with balance sheet & UDIN No.
List of existing commitments and ongoing work
List of existing commitments and ongoing works signed by the officer not below the rank of Executive Engineer
Satisfactoriy completed as prime contractor at-least any kind of work of value not less than Rs.1.41LAKHS
PWD class- 4 and above Registration Certificate (Valid License copy issued by competent authority.)
Reservation of scheduled Caste certificate upload compulsory
Contractor has to upload GST Declaration Certificate in the prescribed format.
Liquid assets and /or availability of credit facilities of no less than Rs.7.92 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. in the suggested format attached in bid document
₹500
₹7,800
27 Apr 2026
27 Apr 2026
15 May 2026
11 May 2026
Word No-20 Bepar street Prthana Mandira Toilet at TMC Tarikere.
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Size Stone masonry with hard stone in foundation & plinthwith Cement mortar 1:6 (1 cement : 6 coarse sand).Page No 9/ 5.4 (vol 1)Rate wef 08.10.2025
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Reinforced cement concrete for allSuperstructures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...
Providing and laying in position Reinforced cement concrete for allSuperstructures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame t...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing 15 mm cement plaster on the rough side of single or halfbrick wall of mix 1:4 (1 cement: 4 fine sand) including rounding offcorners wherever required smooth rendering, providing and removing...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm::Page No-134/14.13.1,VOL-2
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931,Page No-119/13.12PWDSR-2023-24.VOL-2
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories completePage No-127/13.59VOL-5
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Doc.doc
Tender Document • 1.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .