GE/DS-60/2024-25

Amount

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed.

Taking down cement plaster on brick/concrete surface including racking out joints heacking for key scrubbing down with water etc.complete all as specified and as directed.

M&L rendeing 15 mm thick on brick/stone masonary/ concrete surface other then fair faces surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer, complete all as specified and as directed.

Dismantling of MS steel work in post, gats, boundry wall etc, any type and any description complete all as specified and as directed.

S&F in repaires galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and as directed (each line wire to be measured)

S&F for razor punched tape Concertina coil of dia 600 mm (before stretch) 55 turn per coil and after expanding the effective coil length 10m running length per coiland appx weight of each coil is 9 kgs, the coil wire should be min 250 gsm GI wire of dia 2.90mm wire with 0.4 mm thick 250gsm GI punched tape with 3 clipping points and GI clips complete all as specified and as directed.

S&F mild steel work such as in fencing post, tie bars etc including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc confirming Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10 cm width or girth etc.complete all as specified and as directed.

M&L for one coat of synthetic enamel paint on old steel surfaces exc 10 cm width or girth etc. complete all as specified and as directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of Priming plastered and other surfaces with alkali resistant priming paint primer of same make complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Parapet wall) complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate as in fins, fascias, louvres, parapets, and railings, newels, balustrade, and the like complete all as specified and as directed.

S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and as directed.

S&F 8mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and as directed.

M&L Formwork wall amd to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work etc. complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

M&L for granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms etc. in 20mm thick screed bed in CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

Dismentling paver blocks/chequer tiles etc in any position and of any description complete all as specified and as directed.

S&F ultra design cement concrete coloured chequered tiles 30cm x 30cm x 25mm thick with glossy finish with grey cement and pigment any pattern and any approved colour, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer of mortor 1:6 for laying floor finish complete all as specified and as directed.

M&L for 60mm thickness machine pressed pre-cast concrete interlocking paver block any size and shape confirming to IS 15658-2006, M-30 grade with grey cement and no pigment, laid over 40mm thick sand cushion and including joints filled with sand, complete all as specified and as directed.

Demolition of cement concrete in ground floors, coping,fixing post and pavings n.exc 15 cm thick below or above ground level (unreinforced) complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0, using 12.50mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing and as specified.

M&L for 100 mm thick, cement concrete 1:2:4 type B1, using 40mm graded stone aggregate as in floors, pavings and hard standing etc. and finishing top surface with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green etc. complete all as specified and as directed.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

M&L for continous road edging with factory made pre-cast cement concrete blocks 1:3:6 using 20mm graderd stone aggregate, blocks exceeding 10cm thick with plain fair faces with or without chamferred edge and setting and jointing in cement mortar 1:4 including necessary excavation in hard/dense soil, tamping ground aroiund blocks and removal of surplus soil to a distance not exceeding 50 metre complete all as specified and as directed.

M&L for preparation of existing kerb stone concrete/brick surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over one coat of primer complete all as specified and as directed.

M&L for preparation of newly kerb stone concrete/brick surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of weather proof primer complete all as specified and as directed.

Cutting of vegetable plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4, type B1 with surfaces finished to match complete including scaffolding etc, complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar internal dia 150mm complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar internal dia 200mm complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar internal dia 300mm complete all as specified and as directed.

M&L reinforced concrete pipes 200mm dia, class NP2, laid and jointed complete with collars laid and tested in complete all as specified and as directed.

M&L reinforced concrete pipes 300mm dia, class NP2, laid and jointed complete with collars laid and tested in complete all as specified and as directed.

M&L concrete bed to drain pipes 200mm dia cement concrete 1:3:6 type C2 including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.

M&L concrete bed to drain pipes 300mm dia cement concrete 1:3:6 type C2 including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.

M&L 150mm Salt-glazed stoneware (SGSW) drain pipes laid in trenches and jointed as specified laid and tested; in complete all as specified and as directed.

M&L concrete bed to drain pipes 150mm dia cement concrete 1:3:6 type C2 including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.

S&F in repaire factory made SFRC manhole cover size 1000mm x 500mm x 70mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole. (c) M/s BRHL concrete industries.

Note :- The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender.

P R Constructions (BID ID -3085112)

M/S VERMA BUILDER (BID ID -3093417)

M/S Parmod Johar (BID ID -3077651)