WBPWD/SSE/SWEC/NIQ124/2025-26

Dismentaling of existing entire old/damaged wiring and stored in the custody of concerned authority.

Supplying and fixing 415V, 125A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make- LK(L&T)/Havells/ABB/SCHNEIDER/Siemens)

Supplying and fixing 415V, 125A Porcelain fuse base cutout unit (3nos) fixed on hylum sheet on wall with necessary nuts bolts washers etc incl. S & F 1 no. neutral link set. (Make-LK(L&T)/Havells/Anchor)

Supplying and fixing double door SPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+12 way [Enclosure 607712] Incomer:- 240 V 2 Pole 40 A MCB Isolator - 01 Nos Outgoing:- 240 V 1 Pole 6-32 A MCB [Breaking capacity 10kA & C characteristics]- 12 Nos [ Make:- Legrand/Schneider/Siemens]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 8 way [Enclosure 607717] Incomer:- 415 V 4 Pole 100 A MCB Isolator - 01 Nos Outgoing:- 240 V 1 Pole 6-32 A MCB [Breaking capacity 10kA & C characteristics]- 24 Nos incl.2 nos cable end box. [ Make:- Legrand/Schneider/Siemens]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Average run 10 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish (on board)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Delivery of 18 watt or 20 watt LED TUBE Philips Cat No. Mas LED Tube 1200mm 18W 865 T8 I-2100im/ Crompton-Cat No. LTB-20-865-(2) or equivalent make and model of wipro) with 3 years warrenty

Supply & Delivery of Single LED Tube light fittings (Make- Signify (Philips), Cat No. TMC-502 1xT-LED 22W or equivalent model of CG Fittings-IGP161LT8-16 1xT8/wipro) with 3 years warrenty

Supply & Delivery of Twin LED Tube light fittings (Make- Signify (Philips), Cat No. TMC-502 2xT-LED 22W or equivalent model of CG Fittings-IGP162LT8-16 2xT8/wipro) with 3 years warrenty

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod, Canopy, fork incl S & F of P - 2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor and Safety Wire (supplied at the time of delivered the fans ) etc. without regulator, (Make- Orient Electric- New Breeze ( 5 Yrs warranty),1200 mm sweep; 44W; 320 rpm; 225 cmm; 3 star/ Usha 1200MM STRIKER PWD ISI 1 STAR (Safety Wire & S3 Capacitor) Br / ac ceiling fan or equivalent model of Crompton Greaves and as per direction of EIC as per direction of EIC.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply and Fixing of 230 V, 50 HZ, 450 mm, 90W, 1325 RPM,110 CMM, high flo oscillating type, metal blades Wall Bracket fan operated by pull cord switch with inbuilt regulator. ( Make:- Crompton Cat No- 450mm SSTORM 2 ( METAL BLADE) /Orient Electric - Tornado Wall II/USHA Cat No. 450MM DOMINAIRE WALL FAN )

Supply & Fixing 240V, Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover Incl. Making necy. connections etc

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

Supply of following Item:

250V 9''dia (Make : EPC / As per the Choice ofEIC)

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Supplying LED bulk head light fitting (Make : Signify(Philips) Cat no.-WT202W LED6S NW PSU S3 PC/ Crompton Cat No. CIS 306-10-57-SL-DP-NBK or equivalent model of Wipro)

Supply & fixing 250V 02 Nos 6 A flush type plug socket with 2no 6 A Piano key type switch (Anchor make) incl. S&F 150x100x65 mm MS ( 16SWG) switch board and bakelite/perspex top cover of 3mm thick by brass screws after making housing for regulator knob by cutting bakelite/perspex top cover Incl. Making necy. connections etc

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 25 A, Modular type starter (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on 100mmx100mmX65mm sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] through cutting channel of 40 mm x 40 mm size on masonry wall by electric operated cutting machine incl. S&F 19mm dia 3mm thick heavy gauge polythene pipe without continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

a. 3 x 22/0.3 (1.5 sqmm)

b. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

c. 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

d. 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] through cutting channel of 43 mm x 43 mm size on masonry wall by electric operated cutting machine incl. S&F 2 no 25 mm dia 3mm thick heavy gauge polythene pipe without continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply and Fixing of 40/50 mm. dia(as suitable with fittings) 2.0 mtr. long detachable type G.I. Single arm bracket, suitable for pole head/wall bracket of 3.5m length (being curved at 115 degree). The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC. (To be Fixed on Roof Top)

Supply & Fixing of 250 V. 90 WATT LED fittings complete with all accessories street light luminaire with single piece die cast alluminium housing and heat resistance toughened glass IP 66 protection out door luminaires. (Make: Philips(Signify) Cat No. BRP333 LED110 CW R5C FG PSU S1 V1/Crompton Cat No. CRP-425-90-57-HL2-LM-NSG or equivalent model of Wipro) Onsite five(05) years warranty by OEM. The OEM warranty certificate, clearly and explicitly stating a warranty period of five (05) years, shall be submitted to the Engineer-in-Charge (EIC) prior to execution of the work.

Supplying & Fixing PVC waterproof type looping cable box (Make : SINTEX/As per EIC) size minimum 200x150x100 mm deep comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, two provision of compression type brass cable gland for upto 4- core 16 sqmm PVC/A cable and having lined with rubber gasketted top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole, including S&F 40x6 mm thick, suitable "C" type 4mm thick MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply and drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire through 13/19mm thick Polythene pipe. [Make:- Finolex/Havells/RR Kable / Polycab/Gloster]

Supply and delivery of 2 Core 10 sqmm. XLPE Insulated, Cores Laid Up, Thermoplastic Tape Inner Sheathed, Unamoured/ Armoured and Extruded PVC Type ST2 Outer Sheathed As Per IS‐7098 (Part 1) 2011 with Up To Date Amendments, Aluminium armoured cable. [Make:- Finolex/Havells/RR Kable / Polycab/Gloster/Mescab]

Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

2 core 10 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

2 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core 10 sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. (TATA-Medium)

Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supply & Fixing of 12 Volts, 200AH Inverter Battery. (Make: LUMINOUS ILTT25060 200Ah Tall Tubular Inverter Battery (200Ah) or equivalent model of Exide /Amara Raja) with two (02) years warrenty

Supply, installation, testing and commissioning of 950 VA / 12 V, Modified Sine Wave Hybrid UPS/Inverter, suitable for 24×7 operation, complete with all necessary accessories, fixing in position and making electrical connections, as required at site. (Makes: Microtek (Model: UPS 24×7 HB-950VA V2) or equivalent model of APC / Emerson / Delta/ Numeric )

Supply and Fixing of Timer DB (concealed in wall or Surfaced as per the site condition) 1) 230V, Upto 16 A capacity 24 Hrs Analog Electromechanical Time Switch (Make-Lauritz Knudsen (L&T) Cat No:- AUTS03ANA00/Siemens/Schneider) 2) 2 Pole Power Contrcator (L&T-MNX 32-2P Cat No- CS90241/Siemens/Schneider ) - 01 Nos 3) 32A SP MCB. [Make-Siemens/Schneider/Lauritz Knudsen (L&T) 4) 32A DP Isolator. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) 5) Toggle Switch. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) or equivalent make) 5) (2+16 Way) SPNDB (Make-Siemens/Schneider/Lauritz Knudsen (L&T) 6) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power. 7) The complete arrangement must be wiring by 1/2.5/4/6 Sq mm PVC insulated Cu wire(Make:- Gloster/Polycab/Havells) with suitable length incl socketing /lugs etc as per requirement & direction of EIC (Make-Siemens/Schneider/Lauritz Knudsen (L&T)/Legrand)

Please Enable Macros to View BoQ information