SPECIAL REPAIR TO BLDG NO 18A OF 13 ELINT SUB GP AND ROOM NO 1 TO 4 OF BLDG NO 9 OF POI AND OTHER SANCTIONED WORKS AT AMRITSAR CANTT

Amount

B/R PORTION Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc

Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

All as per Srl item No 3 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 2 shall be reused after necessary cleaning of mortar)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed

All as per Srl item No 5 above but in CM 1:6.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed

Material and Labour for preparation of new plastered surfaces and applying two coats of cement base paint of shade as approved on wall surfaces complete all as specified.

Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer on walls complete all as specified.

Material and Labour for preparation of new plastered surfaces and applying two coats of white wash on ceiling complete all as specified.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

All as per Srl item No 11 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening all as specified and directed after easing and adjustment.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed.(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- MS guard bars, sheet glass wire mesh and painting shall be measured and paid sperately

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. NOTE : , Guard bar, Sheet glass and painting shall be measured and paid Separately.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed

S&F in repair stainless steel kitchen plate rack size 900 x 600 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete all as specified and directed

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S/F framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face &2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing.

Supply and fixing aluminium chowkat powder coated of size as directed according to site requirement for door and windows complete all as specified.

S & F aluminium anodized powder coated door with member of shutter size 100x40 mm for vertical style and TOP rail, lock rail 150 x 40 mm and bottom rail 200 x 40 mm with one rebates including anodized snap beading, rubber, bush and packing aluminium hard ware such handle 200mm, mortice lock, hinges, tower bolt 200 mm aluminium and 5.00 mm thick frosted glass (the thickness of all members of aluminium not less than 1.5 mm and hydraulic floor door spring double action regulated with stainless steel cover governing point hinges of bars heavy duty and mortice lock 4 levers complete all as specified and directed.

Supply and fixing aluminium powder coated shutter (for window and ventilator) with style, top and bottom rail of section 44 x 44mm of 14 Gauge thick sliding type, without sash bars including 5mm thick glass panes with 5 micronthick black sheet and necessary jointing cleats, rubber beading, aluminium anodized snap beading , scews, aluminium anodized fitting such as peg stay150mm long,butt hinges 100mm, tower bolt 100mm and handle including aluminium grill of appropriate size etc complete all as specified.

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading or galzing with putty including.

All as per Srl item No 26 above but figured glass pin head type & glazing with oil putty

S&F 300mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed

S&F 150mm long Aluminium handles, cast type anodised

S&F 300mm long ordinary rat tail rod pattern spring, including roller and roller plate.

S&F 100 mm Butt Hinges, medium weight, cold rolled mild steel and fixed

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

S&F glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6.

Supply and fixing in repair vitreous china squatting pan ( Orissa Pattern) ivory shade size 580 x 440 mm (white), with PVC (SWR) P or S trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 complete all as specified. Note :- Flush pipe and flushing cistern to be measured and paid separately.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern ivory shade low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

Supplying and fixing rotational moulded polythelene water storage tanks(triple layer) capacity 1000 litres(cylindrical vertical with closed top), with and including 20mm bore float valve PTMT with fittings epoxy coated minimum weight 210 gms with aluminium rod hoisted, fixed in position and making connection including dismantling of existing unserviceable tank Exc 500 Ltr and not exceeding 1000 Ltr capacity complete all as specified.

Taking up or down 15mm bore steel tubing and connections , including cleaning for re-fixing or removal of store.

S&F 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

Ditto all as per item No 41 but 20mm bore.

Refixing old steel tubing and connections 15mm bore in new or old position ( walls, ceiling , floors, etc.). Note:- old serviceable GI tubing obtained from Srl item No 41 will be reused after necessary cleaning and with all new fittings.

All as per item No 44 but 20 mm dia

S&F in repairs chromium plated angle valve 15mm bore fancy type screwed down for high pressure complete all as specified and directed.

S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed

S&F in repair Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.

S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed.

S&F in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

S&F in repair PVC waste pipe32mm dia fixed to WHB

S&F in repairs MS pipe 20mm bore, powder coated chromium plated with fixing brackets stops rollers including fancy type knobs two Nos to each curtain rod.

S&F in repairs 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 40mm graded stone aggregate as in plinth protection Finishing fair and even.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories

S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge Make:-supremo,Finolex,Jyoti.

Ditto all as per item No 57 above but laid in trench or in floor

S&F 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joint, fixed to walls including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and directed by Engineer-in-charge Make:- Supremo Finolex ,Jyoti

Ditto all as per item No 59 above but laid in trench or in floor

S&F 110mm bore PVC (SWR) bends any radius With access door

All as per Srl item No 61 here in before But 75mm bore.

M&L 110mm bore PVC (SWR) floor trap ,plain with grating including jointing with solvent cement

Excavation in trenches in soft/loose soil not exceeding 1.5mtr wide and not exceeding 1.5 mtr in depth and not excceding 10 sqm on plan, getting out etc complete all as specified.

Returning filling in the soil including spreading, levelling, watering and well ramming in layer n.exc 25cm thick each layer complete all as specified and directed.

Removing excavated soil to a distance not exc 50m away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed by Engr-in-Charge

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof padding ,roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating complete all as specified and directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed

S&F minimum 3 mm thick APP Film based polymeric memrane minimum weighing 3 Kg per Sqm reinforced with polyster non woven polyster (weight not less than 150 gms/sqm) laid over bituminous primer of 0.3 Kg/Sqm and with complete torch application including sealing of joints 100 mm along width and 75 mm along length of membrane after cleaning down the roof by brooms complette all as specified and directed.

M&L for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) and pointing in CM 1:3 mixed with 5 % of crude oil by weight of cement complete all as specified and directed

All a per Srl item No 72 above but except tiles (old serviceable dismantled tiles obtained from Srl item No 101 shall be reused after necessary cleaning of mortar)

Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings

Dismantling boarding , any description , fixed in any position with screws

Dismantling RCC purlins in suspended works all as specified and directed

M&L for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling as specified and directed by Engr-in-charge

S&F GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixe to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.

Hangers 2 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

S&F mild steel Gde Fe-410-W as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel, hollow tube or flat sections) including distance pieces , cleats etc including welding of joint as per the direction given by Engr in charge

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces

M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces.

M & L for udaipur marble16 - 18 mm thick ( Table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match any shade other than white and black including dismantling of old stone slabs and tiles and removing the rubbish to a distance exc 50mtr but not exc 100mtr away to low lying areas complete all as specified complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in shelves, roof landing etc incl demolition complete all as specified.

S&F Mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending and binding with wire (annealed) not less than 0.9mm or scouring with clips.

Use & waste form work to soffits of suspended slab such as roof slab Floor slab, shelves and chajjas etc not cxc 200mm thick complete.

Supply and fixing in repair vitreous china wash hand basin Oval type ivory shade of size 580 x 440 mm including bracket, CP waste coupling 32mm PVCwaste pipe, chain, plug and porcelein stopper complete all as specified.

Supply only integral water proofing compound.

M&L for applying avearage 2mm thick wall putty after complete removal of existing treatment on wall on old decorated surfaces or newly plastered surfaces complete all as specified.

M&L Preparation of old decorated brick/concrete, plastered / unlplastered surfaces of walls, pillars, cornices by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of old cement base painted surfaces and applying one coat of cement base paint complete all as specified and directed.

M&L Preparation of old decorated brick/concrete, plastered / un plastered surfaces of walls,, pillars ,cornices etc and applying two coat of white wash on the walls pillars, cornices etc. complete all as specified and directed.

M&L Preparation of old decorated brick/concrete, plastered / unlplastered surfaces of ceiling and applying one coat of white wash on ceiling complete all as specified and directed .

S&F 4mm thick ACRYLIC sheet board of size 450 mm x 450 mm in high quality with made in printing type sample of letters/ picture/ writing and shape will be provided by Engr - in - charge complete all as specified and as directed. Note sample of ACYLIC sheet board is to be provided.

Supply and fixing sink made of stain less steel 1mm thick kitchen or laboratory with plug washer and waste incl fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm, bowl size 410mm x 330mm x160mm complete all as specified.

Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description, exceeding 10 CM width or grith and applying one coat of synthetic enamel paint complete all as specifed and directed.

Supply and fixing solid PVC board 18mm thick plain colour as in cup board shelves, kitchen cabinet etc. , complete all as specified and directed.

Supply and fixing solid PVC shutter one side prelam of any shade 18mm thick plain colour as in cup board/ kitchen cabinet shutter etc. , complete all as specified and directed.

Supply and fixing solid PVC sheet 5mm thick plain colour as in cup board, kitchen cabinet etc. , complete all as specified and directed.

supplying and fixing stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm, complete all as specified and directed. Note :- Net area of front finished surface will be measured.

Supplying and fixing 40mm box type stainless steel hinges hydraulic type,complete all as specified and directed.

Supplying and fixing 75-80 mm size stainless steel handle cast type complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as concrete bed, laid to falls in trenches in any depth including packing under, and haunching against the sides of SGSW pipes 150mm bore, after the pipes have been laid and tested including complete all as specified and directed

Demolition and breaking up existing unserviceable 150 mm SGSW pipe and haunching against the sides of pipe at any depth including removing rubbish to a distance exceeding 100m complete all as specified & directed.

Supplying,laying in trenches, jointing and testing 150 mm bore salt glazed stoneware pipe grade 'A' drainpipe ISI marked all as specified & directed.(Excavation and earthwork shall be measured and paid for separately under appropriate items of Sch. 'A'.)

M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as cover slab for manhole and similar work etc including necessary formwork complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure.

M & L for cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer on ceiling complete all as specified.

Complete removal of existing treatment from walls/ ceilling etc. by carefully scraping or by sandpapering or by any other means & material and labour for preparing surfaces preparatory to distempering and M&L cement base putty as required incl preparing the surfaces smooth by rubbing or sandpapering and M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer on walls/ceiling complete all as specified.

M&L for Vitrified tiles,light shade 10mm thick (Square/ rectangular) polished (colour & shade as approved by GE), area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6.

All as per item No 112 here-in-before but on vertical surfaces but on rendering 10mm thick in CM 1:4.

Dismantling framed work timber scantling of any size/ section, in any position complete all as specified

M&L timber scantling framed work second class hard-wood clean sawn scantling complete all as specified.

M&L in repair for Block Boards, 19/20mm thick, grade 1 quality , exterior grade, decorative type with decorative face veneer on one face, of approved make, fixed with screws to timber frame work complete all as specified.

M&L for external teak wood lipping, 6mm thick to 18/19mm thick block board or prelaminated particle board, fixed with nails including french polish etc complete all as specified.

S&F stainless steel handle 125mm long complete all specified.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one or more rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item No 119 above here-in-before but size 125x60mm with double rebate.

M&L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified.

S&F factory made 35 mm thick Flush shutters, any number of panels, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specfied and directed.

S&F in repair door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed

S&F Mild steel , Two lever, Mortice lock, verticle type of size 100mm complete all as specified. Make Godrej

S&F stainless steel Classic cylintrical Lock centrally pressed knob type complete all as specified. Make: Godrej

S&F Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws complete all as specified.

Supply & fixing in repairs vitreous china wash down water closet pan (padestal pattern) with flush pipe 32mm dia for low level flushing cistern including plastic water closet seat cover white , closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device ,complete as directed. (excluding flushing cistern).

S&F in repairs flushing jet including pipe for Europian type closet including fixing to 15m dia pipe suitable length with brass check nut complete all as specifed and directed.

S&F in Repair vitreous China wash basin with pedastal white,flat back size550x400mm including CP waste coupling 32mm bore,waste PVC pipe complete.

S&F in repairs centre hole mixer cast coppre alloy chromium plated with capston head (Pillar Mounted) srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia complete all as specified.

Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity (White colour), closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

S&F in repair 100mm bore Cast iron floor trap, with grating including jointing to waste pipe in run lead.

S&F in repair Brass Chromium plated Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges

S & F decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified.

S&F 50mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F 20 mm Veneered particle Board, solid core, exterior grade, with decorative face veneers both faces

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc. and Brushing neat cement slurry with 3.0 Kg of cement per Sqm.

S&F aluminium powder coated shutter (for windows and ventilator) with style, top and bottom rail of section 44 x 44 mm of 2 mm thick sliding type, without sash bars including stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm for windows & necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminum anodized fittings such as peg stay 150mm long, butt hinges 100 mm, tower bolt 100 mm and handle dtc complete all as specified.

S &F in repairs CP brass wall mixer with telephonic shower arrangement and telephonic shower suitable for 15 mm dia bore pipe with all fittings complete as as specified and as directed.

S&F anodized aluminium powder coated frames for partition with one or more rebates including jointing cleats for fixing, necessary rubber beading etc complete all as specified.

E/M PORTION Taking down carefully the existing aluminium point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings any type etc by unscrewing and taken away from site complete. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

M & L Wiring complete with 1.5 sqmm single core FR PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including conceled conduit concealed of size 20 mm medium grade / fixed on wall / ceiling with suitable clamps, screws, etc or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :- (a) One light point/Bell/Fan point controlled by one switch.

(b) One 3 pin 5 amps switch socket on independent board.

(c) One 3 pin 5 amps switch socket on same board.

All as per item No 143 herein before but with cable 2.5 sqmm (nominal area) multistranded copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continous earth wire FR PVC insulated 2.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed Note for items Nos 2&3 :- (a) The wiring shall be done in proper colour coding using red,yellow and blue for phase,black for neutral and green for earth leads.

Supply and fix switch piano one way 5 A, SP, 230 Volts.

Supply and fix Socket outlet 2 in 1, 3 pin 5 Amps Flush type.

Supply and fix Switch outlet 2 in 1, 3 pin15 Amps Flush type.

Supply and fix stepped type electronic fan regulator flush type all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant/batten fittings complete all as specified and directed

Supply and fix wall/celing mounting LED 20 Watt 6000k PC Diffuser tube light fitting complet with all aceesories 1x20W LED suitable for domestic application 240Volts 50HZ including one tube rode and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor and complete.

M & L in repairs for sub main wiring with 1100 volt grade two single core FR Wire PVC insulated and unsheathed cable with stranded copper conductor 4 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 4 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. Including taking down old unserviceable sub main wiring .NOTE: 2 single core 4 sqmm and one 4 sqmm cable and PVC conduit shall be measured as one RM.

All as per item No 153 above but 2 runs of 2.5 Sqmnn including 2.5 Sqmm single core multistanded copper conductor as earth electrode. Note : - 2 Runs of 2.5 Sqmnn & 1 run of 2.5 Sqmm & 1 run of PVC conduit will be measured as 1 unit.

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified. (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate)

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified. Make :Legrand Lexic / Hager /Schneider Elect . (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quoted rate)

S & F in repair MCB double pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S & F in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 25 sqmm 2 core armoured with cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge.

M & L for brick protection to cable using old size sub class 'B' bricks, laidflat, dry butt jointed, laid lengthwise perpendicular to the axis of cable all as specified & directed.

M&L for sand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after lying of calbe in trenches complete all as specified & directed.

Supply and fixing /laying galvanised pipe 50 mm bore medium grade fixed to pole with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed.

Supply and fix in replacement of security light fitting LED 36 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed of Make Jaguar /Philips/Havells or equivalent

S& F GI bracket light grade GI Pipe 1.2 mtr Length for fixing of street light fitting 36/40 Watt including connection all as specified and directed.

S&F MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 160 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% complete all as specified. Make :Legrand/Schneider/Hager. (Note : The cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate)

S&F Exhaust fan 350 mm sweep heavy duty including cutting of walls , louvers nut and bolts etc including connection complete all as specified and directed.Make Crompton/Bajaj/Hevells

Supply and Fixing Modular switch 6 Amp 1 way 1 module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular switch 16 Amp 1 way with indicator 1 module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular socket shuttered 6 Amp 2/3 pin combined 2 module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular socket 16Amp multipurpose type 2 module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular Fan regulator step type 120 watts 2 Module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular blank plate 1 Module size complete all as specified and as directed by Engr-in-Charge.

S&F bell push, Module type, single pole 5 amps complete all as specified and directed.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed.

S & F Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size & MS box of suitable size and making good surface as original by plastering and whitewash/colour/distemper etc complete all as specified.

Blanking plate of plastic (suitable for distribution board).

S & F 50 mm bore light grade galvanised iron tubing with all necessary GI fittings as in protection pipe of cable, fixed to pole or laid under floor / ground / under road crossings for protection of cable complete all as specified and directed.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 50 sqmm 3.5 core with cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 600mmx600mmx6.3 mm thick burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15 cm thick layers of common salt and charcoal dust starting FRLSom ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead of size 4 mm by means of galvnised nuts, bolts and washers. GI wire of 4 mm dia laid in 15 mm dia light grade GI pipe as protection FRLSom top of the plate up to test point (cost of protection pipe up to 7.5 meters FRLSom earth electrode will be included in the rates quoted by the contractor

S & F in repair wall /ceiling mounting LED 9 Watt high quality sleek aluminum extruted tube light fitting complete with all acessories 1x9 Watt LED , suitable for domestic application, 240 Volts, 50 Hz, including one tube rod and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete all as specified and directed.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including 1 run of 4sqmm single core multistranded copper conductor PVC insulated cables as neutral continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring . Note : 2 Run of 6 sqmm, 1 run of 4 sqmm,and 1 run of PVC conduit as mesuared as 1 unit

S&F in repair energy saving new generation 10 watt LED, 6000k bulk head luminaire light fitting complete with all acessories and connection complete. Make : Havells/ Philips/Bajaj

S&F wall mounting light fitting including LED Lamp 15 watt (CT-1) New and making all electric connections complete all as specified and directed

S&F modular switch and scoket (Starter) 25 Amp cap for AC complete all as specified and directed

Supply and fix in replacement of security light fitting LED 25 Watt Including GI bracket of suitable size , mounted on wall with two nos 8 mm dia, 40 mm long bolts, nuts with twin washers grouted in wall including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed

S&F fresh air fan 250 mm sweep PVC body including cutting of wall /window and fixing arrangement complete all as specified and directed. Make :- Crompton / orient.

Bharat Builder