REPAIR/RESURFACING TO ROAD , PATH, CULVERT, ROAD FURNITURE AND STONE SETT FLOORING IN ZONE -II AT MIL STN JAISALMER UNDER GE (A) JAISALMER

Amount

M&L for Bituminous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with 5.5% binder (Paving bituminous VG-30 Grd) content by weight of total mix including prepration of existing black top/ unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat of bitumen VG-10 grade @ 5Kg/10 Sqm by mechanical sprayer rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge. Note : Repair of road to be carried out in Patches.

Premix bituminous macadam,with VG-30 and 4% binder content laid /rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less)with paving bitumenous includiing prepration @ 4% by weight of total mix complete rolling to uniform smooth surface with 8 to 10 ton power road roller complete all as specified and directed by Engr-in-charge

S & F in repairs, Solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

S & F in repair, metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, complete all as specified and directed. NOTE : Dealineator to be of Solar type only.

Demolition of stone masonry built in cement mortar incl coping of any description all as specified and directed.

M&L squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified.

ditto - as per item No 06, but except stone

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified.

M & L for Keyed pointing to rubble masonry uncoursed or brought up to courses in cement mortar 1:4.

Demolistion of precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar of any thickness or as directed by Engr-in-Charge

M&L Precast cement concrete block masonry with solid blocks PCC 1:3:6, type C1 exc 10cm in width and setting in CM 1:6

M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or Concrete surface in cement mortar 1:4 & finished the surface even & fair without using extra cement all as specified.

Demolition of Stone sett paving of any description or thickness laid bedded and pointed in any mortar

M & L for Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush, complete all as specified and directed.

M & L for marking 2.5mm thick center in stop line, dashes, arrows, brackets and similar work on road surfaces and like n. exc 15cm wide as per IRC pattern with thermo plastic paint of approved make and mix with 8% mica sign applicator machine, complete with traffic diversion arrangement. For example : Painting work on Zebra crossings, speed brakers etc. (Make-CMS Bombay/Shivalik/Prime-Chandigarh /Ritacto-Meerut/SN Industries-Delhi).

Manufacturing, supplying and fixing in repair retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

Manufacturing, supplying and fixing in repair retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge

Manufacturing, supplying and fixing in repair retro reflective Overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD- 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitablesized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-harge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment)

Manufacturing, supplying and fixing in repair Retroreflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.

Bhawani Construction Company

Satya Construction

M/s Brij Construction And Engineers

GEMRARAMCONTRACTOR

New Vishvakarma Udhyog

M/s Madan Gopal Vyas