REPAIR MAINT OF PUMP SETS PANELBOARD AND OTHER ALLIED WORKS OF PUMPHOUSE IN TECHNICAL AREA OF AIR FORCE STN CHAKERI KANPUR

Amount

Taking out/Lifting of defective submersible pump set of 45/30/20 HP capacity from bore well including motor, column pipes upto 150 mm dia, steel rope, submersible cable and accessories etc and depositing in AGE E/M store yard complete all as specified and directed.

All as per item No. 01 but submersible pump set of 15/12.5/7.5 HP capacity

Lowering only submersible pump set of 45/30/20 HP along with motor, column pipes, steel rope, submersible cable and accessories etc after repairing including testing commissioning of submersible pump set complete all as specified and directed.

All as per item No.03 but submersible pump setof 15/12.5/7.5 HP capacity Note for item No 3&4:- All spares required to make the motor, pumps, column pipe etc serviceable shall be measured and paid separately under relevent items as supply only including transportation to and from upto contractor workshop.

Dismantling of pump motor set 7.5 to 45 HP complete, (Taken out under above item /lying unserviceable in store yard of AGE E/M) cleaning all dismantled spares parts / winding for inspection of Engineer-in-Charge to ascertian the scope of work for repair/replacement of parts complete all as specified and directed. Note :- Spare parts shall be measured and paid separately under respective item.

Rewinding of submersible motor, 45 H.P, 3 Phase, 50 Hz, 415 Volt with PVC insulated / coated copper winding wire of existing gauge with other winding material such as insulating paper, sleeves, bamboo stick etc. as per standard manufacturers specification including cleaning of stator, slots replacement of defective parts and testing complete all as specified and directed.

All as per item No.6 above but submersible motor 30 H.P

All as per item No.6 above but submersible motor 20 H.P

All as per item No.6 above but submersible motor 15/12.5 H.P

All as per item No.6 above but submersible motor 7.5 H.P

S&F epoxy type cable jointing kit 25/16 Sqmm 3 core complete with all the jointing material , ferrule , insulation tape etc for 1100 Volts flat submersible copper conductor cable complete all as specified and directed.

S&F epoxy type cable jointing kit 10/6 Sqmm 3 core complete with all the jointing material, ferrule , insulation tape etc for 1100 Volts flat submersible copper conductor cable complete all as specified and directed.

Machining work required for repair to submersible pump set 7.5 H.P. to 45 H.P. by straightning, polishing of pump shaft, making screw and key way, complete including replacement of wornout parts re-assembling pump after repair for smooth functioning of pump complete all as specified and directed. Note :- Fixing payment shall be deemed to be included in quoted rates.

Supply only stainless steel impellers with key and distance bushes suitable for 45/30/20/HP Pump complete all as specified and directed.

Supply only stainless steel impellers with key and distance bushes suitable for 15/12.5/7.5/HP Pump complete all as specified and directed.

Supply only Non return valve suitable for 45/30/20/HP Pump complete all as specified and directed.

Supply only Non return valve suitable for 15/12.5/7.5/HP Pump complete all as specified and directed.

Supply only Bearing bush upper & lower suitable for 45/30/20/HP Pump complete all as specified and directed.

Supply only Bearing bush upper & lower suitable for 15/12.5/7.5/HP Pump complete all as specified and directed.

Supply only Neck ring suitable for 45/30/20/HP Pump complete all as specified and directed.

Supply only Neck ring suitable for 15/12.5/7.5/HP Pump complete all as specified and directed.

Supply only Distance sleeve suitable for 45/30/20/HP Pump complete all as specified and directed.

Supply only Distance sleeve suitable for 15/12.5/7.5/HP Pump complete all as specified and directed.

Supply only High tensile nut bolts/stud suitable for 7.5 to 45 HP complete all as specified and directed.

Supply only gunmetal motor bush upper and lower (set of two) for 45/30/20 HP complete all as specified and directed.

Supply only gunmetal motor bush upper and lower (set of two) for 15/12.5/7.5 HP complete all as specified and directed.

Supply only Rotor bearing sleeve upper and lower for 45/30/20 HP complete all as specified and directed.

Supply only Rotor bearing sleeve upper and lower for 15/12.5/7.5 HP complete all as specified and directed.

Supply only Coupling with key for motor pump for 45/30/20 HP complete all as specified and directed.

Supply only Coupling with key for motor pump for 15/12.5/7.5 HP complete all as specified and directed.

Supply only Sand Guard for submersible pump set for 45/30/20 HP complete all as specified and directed.

Supply only Sand Guard for submersible pump set for 15/12.5/7.5 HP complete all as specified and directed.

Supply only Housing upper & lower for 45/30/20 HP complete all as specified and directed.

Supply only Housing upper & lower for 15/12.5/7.5 HP complete all as specified and directed.

Supply only Thurst bearing assembly for submersible pump set motor of 45/30/20 HPcomplete all as specified and directed.

Supply only Thurst bearing assembly for submersible pump set motor of 15/12.5/7.5 HP complete all as specified and directed.

Supply only CI Bowl suitable for submersible pump set 45/30/20 HP complete all as specified and directed.

Supply only CI Bowl suitable for submersible pump set 15/12.5/7.5 HP complete all as specified and directed.

Supply only flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 16 Sqmm , ISI marked and connected to submersible motor complete all as specified and directed. Make:- National Cables / Finolex / Havells/Plaza/Polycab

Supply only Flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 6 Sqmm , ISI marked and connected to submersible motor complete all as specified and directed. Make:- National Cables / Finolex / Havells/Plaza/Polycab

Supply only M S column pipe 150 mm dia 3.00 mtr long ,5.8 mm thick both ends flanged duly welded on threads with 4 Nos mild steel flat iron ribs, and provision for passing of submersible cable including nuts, bolts and packing as required complete all as specified and directed.

Supply only M S column pipe 100 mm dia 3.00 mtr long, 5.8 mm thick both ends flanged duly welded on threads with 4 Nos mild steel flat iron ribs, and provision for passing of submersible cable including nuts, bolts and packing as required complete all as specified and directed.

Supply only M S column pipe 80 mm dia 3.00 mtr long, 5.8 mm thick both ends flanged duly welded on threads with 4 Nos mild steel flat iron ribs, and provision for passing of submersible cable including nuts, bolts and packing as required complete all as specified and directed.

Supply only steel wire rope stranded 10 mm dia for hanging of submersible pump set including clamp etc complete all as specified and directed.

Repair/Maint of Wire less type water level indicator system (ie. water level indicator, connecting cables , water level sensor) of any type, checking and tightening of all connections , replacing pieces of burnt wires to make it functional complete all as specified and directed. Note:- Spare parts shall be measured and paid seperately under respective as considered therein.

Supply only Automatic water level indicator transmitter wire less type fixed in over head reservior heavy duty complete all as specified and directed.

Supply only Automatic water level indicator repeater wire less type complete all as specified and directed.

Reapir/Maint of LT panel of any size/type, cleaning inside/outside and around the panel, checking and tightening of all incoming and outgoing connections by replacing aluminium lugs, pieces of burnt wires of existing size as required to make it functional complete all as specified and directed.

S&F in repair of Power contactor three phase 415 volt, 50 Hz , 70 A , AC3 and 100 A, AC1 type ML4 suitable for 50 HP complete all as specified and directed. Make :- L& T /BCH/Siemens

S&F in repair of Power contactor three phase 415 volt, 50 Hz , 32 A, AC3 type ML3 suitable for 30 HP complete all as specified and directed. Make:- L& T /BCH/Siemens

S&F in repair of Power contactor three phase 415 volt, 50 Hz , type ML2 suitable for 20 HP complete all as specified and directed. Make:- L& T /BCH/Siemens

S&F in repair of Over load relay range suitable for 7.5 HP to 45 HP pump set complete all as specified and directed. Make:- L& T /BCH/Siemens

S&F in repair of electronic Timer suitable for7.5 HP to 45 HP star delta starter complete all as specified and directed. Make:- L& T /BCH/Siemens

S&F in repair of MCCB TP, 415V, 100 Amp 25 KA complete all as specified and directed. Make:- Legrand cat No 420045 or equivalent Schneider/L&T

S&F in repair of MCCB FP, 415V, Adjustable type 160 Amp 25 KA complete all as specified and directed. Make :- Legrand cat No 420057 or equivalent as Schneider/L&T

S&F in repair change over switch on load type front handle operated 415V with rating of bus bar 200 Amps four pole 415 Volt complete all as specified and directed. Make:-Havells /Legrand/L&T

Repair/maint of monoblock pump set of 0.5 H P capacity single phase by means of dismantling from foundation derusting and filling of gland packing replacement of seal bearing and rewinding of moter of existing gauge with super enamelled copper wire complete all as specified and directed.

Supply and fixing in repair of Wireless water level indicator Digital type with 7-segment LED display water level of the tanks in % with resolution of 1-2 % resolution, it receive water level data from transmitter and display in % with reset switch to put off the buzzer sound with fuse protection system on/off switch for Receiver display unit.including water level data transmitter with maintenance free water level sensor complete with maximum range of signal approx 500 m at arieal distance including necessary suitable size of copper cable connection for 230 volts supply complete all as specified and directed. Make :-Aqua Brim model Penta cool challenger digital/Sapcon / Johnson automation and control

Disconnecting the electric connection from starter and motor including taking out of pumping set with electric motor of capacity 5 HP from the existing position and strip opening, cutting the burnt out winding, cleaning the stator and re-winding the same with super enameled copper winding wire of same gauge using top class of insulating material and over hauling of pump including lath/ machine work for making housing of bearing , metaling ,welding, turning surfacing ,polishing of rotor shaft, and rethreading and replacement of , neck ring , bearing of required size (Make-NBC/SKF), bushes, rubber insertion sheet , nuts, bolts and washers including necessary other items for its smooth functioning and testing complete reassembling the same and re-fixing back in its original position complete all as specified and directed.

All as per item No. 62 but 20 H.P

S&F in repair of single phase preventor 415 volt , 50 HZ complete all as specified and directed. Make: -MINILAC

Supply only water pressure gauge, 100 mm dial size of range 0 to 7.0 Kg/Sqcm complete all as specified and directed.

S&F in repair of fully automatic star delta starter suitable for 50 HP pump set with relay 45-75 Amp in sheet metal enclosure complete all as specified and directed. Make:- L&T MU-G 50 FASD cat part No CS 96009 or equivalent make approved by GE.

S&F in repair of fully automatic star delta starter in replacement suitable for 30 HP pump set with relay 30-50 Amp in sheet metal enclosure complete all as specified and directed. Make:- L&T MU-G 30 FASD cat part No CS 96008 or equivalent make approved by GE.

S&F in repair of fully automatic star delta starter suitable for 10 HP pump set with relay 20-35 Amp in sheet metal enclosure complete all as specified and directed. Make:- L&T MU-G 10 FASD cat part No CS 96005 or equivalent make approved by GE

Supply only chlorine testing kit comprising of samples of chlorine contents in seald tube from 0.1 to 2.0 PPM and othotodoline solution , testing tube complete all as specified and directed.

S&F for LED Aviation light with all necessary connection complete all as specified and directed. Make:-Havells/Bjaj/crompton.

S&F in repair 1100 volts grade cable PVC insulated 6sqmm multistanded aluminium conductor, over all PVC sheathed twin core flat cable complete all as specified and directed.

Preetpowercontrol