SPL REPAIRS TO BLDG NO 2A LAO OFFICE AT FORT AREA NAGPUR, SPECIAL REPAIR TO COMPOUND WALL ----BLDG NO 52A AT NCC OTA, PROVN OF 07 X SOLAR LIGHTS AND 20 X GARDEN LIGHTS AT 52 COY, ASC SUP TYPE A KAMPTEE UNDER GE KAMPTEE.

Amount

Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

Dismantling of asbestos cement sheet (corrugated , semi-corrugated etc) sheets in roof coverings complete all as specified and as directed.

Dismantling mild steel work of any description not otherwise provided for as specified and directed.

Dismantling wall and ceiling boards ( Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as directed.

Dismantling timber scantlings in frame work 40 sq. cm and over in section, in any position all as specified and directed.

M&L 2nd class hard wood in scantling clean sawn and unframed timber complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and directed

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area not exc 1.5 sqm complete all as specified and as directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) but area exc 1.50 sqm but not exc 4 sqm complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm but n. exc. 2.00 Sqm complete all as specified and directed.

Dismantling of PVC pipes (110mm/75mm bore), jointed in cement mortar and taking out of trenches/from walls including fittings as bands, branch pieces, traps etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specifed and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed.

M & L for TMT bars of 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm etc complete all as specified and as directed.

M & L for TMT bars of 8 to 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm in stirrups, spacers and binders complete all a s specified

M&L for cement concrete 1:2:4 type B-I using 20 mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic bands and other similar bands, parapets, copings, benching, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating incl waste formwork complete all as specified.

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

All as item No. 20.00 above but Half brick wall complete all as specified and as directed.

M&l for rendering 15mm thick in cement plaster in cement mortar 1:6 , finished even and smooth without using extra cement complete all as directed.

M & L for rendering 10 mm thick on surfaces of ceiling in cement mortar (1:3) and surfaces finished fair and even complete all as specified and as directed

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction (WPC shall be measured separately) complete all as specified and as directed.

Supply only liquid water proofing complete all as specified and as directed.

M&L colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 ( 20mm graded stone aggregate) as in landings, cover slabs, (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 complete all as directed and specified.

M&L 75mm thick cement concrete type B-2, 1:2:4 (using 20 mm graded aggregate) ,finished fair and even without using extra cement for plinth protection and similar work complete all as directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed cills, sunshades, shelves, lintels, etc. water tubing or concealed conduit complete all as specified and as directed.

M&L for Roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165) complete all as specified and as directed.

S & F and 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S&F Factory made solid PVC panelled door shutter 30mmthick (Style) consisting of frame made out of MS tubes for top & bottom rails ,MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and palin colour PVC sheet for Top rail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style and rail with suitable PVC sheet beading and jointed toghether with solvent cement etc fixed with frame at site complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure treated of any number of panel complete all as specified and as directed.

S&F 30 mm thick second class hard wood for windows glazed and ,skeleton shutter open and prepared to receive glass , gauge etc. (without sash bars), edge of framing plain,chamfered or rounded. Fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part -I complete all as specified and as directed.

S&F for 150 mm aluminium handles cast type anodised complete all as specified and directed.

S&F for 150 mm Extruded brass handles, fabricated type polished complete all as specified and directed.

S&F for 300 mm brass sliding door bolts, withsand or die-cast brass hasp, staple and fixing bolts with rolled or drawn brass botls and fixed complete all as specified and directed.

S&F in repairs for Brass Mortice lock, vertical type, size 100 mm with 4 lever complete all a specified and directed.

S&F for 150mm floor door stopper brass body of anodised brass body complete all as specified and directed.

S & F 150 mm long Brass, barrel tower bolt of extruded section complete all as specified and directed

S&F mild steel medium weight cold ralled, 100mm size butt hinges complete all as specified and directed

S&F Curtain rod with a telescoping brackets to fit both rod and mounting hardware modular type complete all as specified and directed.

S&F Anodized aluminium frame for doors,window,ventilator with one or more rebates including joining cleat for fixing etc complete all as specified.

Aluminium alloy, anodised, 250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's catalogue and specifications complete all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint complete all as specifed and directed.

S&F 4.8 mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed.

S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and as directed.

S& F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

S&F 5 to 7mm hollow, PVC false ceiling decoratie type fixing at site with GI grid frame work as per manufactures instructions complete all as specifed and directed.

M&L for 5 to 7mm hollow, PVC Wall panelling any colour, PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as sepcified.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as sepcified.

Supply & fix GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified.

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 1000 litres capacity hoisted and fixed in position and including dismantling old water tank and removing from site complete all as specified.

S&F in repairs 15mm bore ball brass valves. high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs Bowl for Coupled WC with PP normal close seat cover, Hinges, Fixing accessories and accessories Set, size 400X665X810mm, P/S Trap- 220mm (Essco by Jaquar Cat No CMS-WHT-103751S220NPP) and cistern with cistern fittings (Essco by Jaquar Cat No - CMS-WHT-103201) Essco by Jaquar or equivalent complete all a specified and directed.

S&F in repairs Single lever basin Mixer without Popup waste with 450mm long Braided Hoses all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101011NB) or equivalent complete all a specified and directed.

S&F in repairs 2 way bib cock with wall fange all as specified and directed Make : Essco by Jaquar (Cat No:APR-101041) or equivalent complete all a specified and directed.

S&F Hand shower (health Faucet) (ABS body) with 8mm dia, 1.2 Meter long Flexible tube & wall Hook all as specified and directed Make : Essco by Jaquar (Cat No ALE-ESS-593) or equivalent complete all a specified and directed.

S & F health faucet of 15 mm bore brass chromium plated including PVC pipe to connection GI tubing 15 mm bore all complete all as specified and directed. (Make: Prayag cat no BEA-40.)

S&F Towel ring square fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Essco by Jaquar (AEC-1121) or equivalent.

S&F Glass Shelf 600mm long fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Jaquar (ACN-CHR-1171N) or equivalent.

S&F Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Jaquar (.ACN-CHR-1173) or equivalent.

S&F Soap dish fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Essco by Jaquar (AEC-1133) or equivalent.

S&F Toilet Paper holder fixed to walls with chromium plated (CP) brass screws Make Jaquar (AEC-1151) or equivalent complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with pIngs including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size410mmx330mmx160mm all a s specified and directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified and directed.

S&F in repairs 15mm dia brass C.P fancy Type stop valves Complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&Fin repairs floor trap100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.

Supply & fixed in repairs Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including of waste pipe complete all as specified and as directed.

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F pre-polished granite 20mm thick fixed on platform/shelves over 20mm thick screed bed in cement mortar 1:6, if directed by Engr In Charge including necessary moulding etc complete all as specified and as directed.

M & L for machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps ,cooking platforms, and other similar situations complete all as specified and as directed.

S&F in repairs 40mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed Complete all as specified and directed.

Demolition of 150mm dia cement concrete bed in haunching and breaking up drain pipes SGSW set in cement mortar of the following dia complete all as specified.

M&L for concrete bed to drain pipes for 150mm dia pipe including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 complete all as specified and as directed.

M&L Salt glazed stoneware drain pipe 150mm dia laid in trenches and jointed complete all as specified and as directed.

S&F in repairs 18/19mm thick block board grade-I quality exterior grade commercial type fixed with screw to timber frame work with beading as required complete all as specified and directed.

M&L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and as directed.

M & L for preparation of old steel surafces of any description over 10 cm width or girth & applying two caots of synthetic enamel complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and directed.

M & L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed

M & L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed

M&L for complete removal of existing treatment and preparation of surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for Preparing new plastered surface and applying two coat cement base paint over a coat of primer complete all as specified and directed.

Material & labour for preparation of old plastered surfaces of wall & applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of old /new wooden surface by rubbing surface/burning old paint and wooden polishing on surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and directed.

Demolation of cement concrete of any description and in any position not otherwise specifically provided for as specified and directed.

M&L Plain Cement concrete as in sub bases/pavings, foundation, mass concrete and fillings Type D2, 1:4:8 (40mm graded aggregate) complete all as specified and as directed.

M&L for Sand filling under floorings/pavement spread and levelled in layers n.exc 15cm thick complete including watering and consolidation complete all as specified and as directed.

M&L of Machine pressed precast concreteinterlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering throating and necessary formwork ccomplete all as specified and as directed.

Removing building materials etc. to a distance of exc 5.0 km under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,for laying of cables, poles and stay etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft soil complete all as specified and as directed.

All as per item No 109 here in above but each additional 1.5 m or part thereof in depth beyond the first 1.5m complete all as specified and as directed.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M & L for Cement concrete1:3:6 type C2 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and as directed.

M&L for formwork to sides of columns and similar work with rough finished surfaces etc complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) Type B0 1:2:4 as in Foundations, including rafts, footings, foundation beams plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) in Columns, pillars, piers, posts and struts Type B1 1:2:4 (20 mm graded aggregates) complete all as specified and as directed.

M&L for cement concrete type B-1 1:2:4 12.5 mm aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or amfered angles and throating, complete all as specified and as directed.

M&L for providing precast cement concrete for louvres and jallies, 25mm thick (measured solid), including allmouldings but excluding frame type B0 complete all as specified and as directed.

Material & labour for Rendering 15 mm thick CM 1:4 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of newly plastered surfaces of wall & applying two coats of cement base paint complete all as specified and as directed.

M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L Form work to side of columns and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specified and directed.

M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L Form work to chullah hoods, chajjas, troughs and similar items including edges and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Formwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for prepartion of new plastered surfaces on wall and applying two coats of oil bound distemper over a coat of Primer complete all as specified and directed.

M&L for Preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and as directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and as directed. .

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specifed and directed.

M&L preaparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

S &F Towel Rail 20mm dia of Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete complete all as specified and as directed.

Supply & fixed in vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and as directed.

S & F 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specifed and directed.

S&F for flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specifed and directed.

S&F PVC connection 15mm size, 600mm long with PTMP nuts both side complete all as specified and as directed.

S&F Wash Basin oval type (56x41cm) including waste cupling and waste pipe complete all as specified and directed

S&F pillar cock tall height fancy type cast copper alloy, chromium plated 15mm dia of bore complete all as specifed and directed.

S&F Vitreous China urinals, halft stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F 15 mm bore CP Urinal spreader for urinals complete all as specified and directed

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete all as specifed and directed.

S&F stop/angle cock fancy type chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specifed and directed.

S&F CP grating of size 100mm dia complete all as specified and as directed.

S&F PVC cowl slotted vent cowl 110 mm size complete all as specified and as directed.

M&L for precast RCC 1:2:4 type B1 using 20mm stone aggregate as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick screed bed in CM 1:4 and aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item Sl No 160 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

All as per item Sl No 160 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

All as per item Sl No 160 above but One 3 pin 5 amps socket out let point on independent board, complete all as specified and directed.

All as per item Sl No 160 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed.

All as per item Sl No 160 above but wiring with 4.00 sqmm multi stranded cable and earth wire with copper conductor of size 4.00 sqmm for 15 amps power point, complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same Make.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed.

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and directed.

Supplying and fixing 18-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed.

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 800 lumen per watt, complete all as specified and as directed.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing round shape 12-15 Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed. Make : CG LSTS-25-CDL/ Philips/ Wipro.

S & F LED light fitting 9W/10W bulkhead luminaires with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230 V 50 Hz complete all as specified and directed.

Supply and Fix Highly durable surface mounted 20 watts LED batten constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt and decorative end cap complete with tube rod,driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and as directed.

Supply and Fix Highly durable surface mounted 09/10 watts LED 2 feet batten constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod,driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and as directed.

Supply and fix sheet metal enclosure triple pole & neutra for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and as directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.

Supply and fix sheet metal enclosure IP 43 single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting, double door complete all as specified and as directed.

Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and as directed.

Supply and fix MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and as directed.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and as directed.

Supply and fix MCB triple pole & neutral 415 volt 40 to 100 A amps 10 KA, complete all as specified and as directed.

Supply and fixing ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fixing Exhaust fan metallic body 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose with making holes complete all as specified and directed.

S&F Exhaust fan made of engineering sturdy plastic 250mm sweep with louvers, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, including making hole of suitable size complete all as specified and as directed.

S&F Exhaust fan 250 mm sweep, made out of sturdy engineering plastic, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and louver shutters, connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and as directed.

Disconnect and insulate electric supply wire and taking down carefully ceiling/exhaust/cabin/ wall fans of any make and sweep dismantling blades complete as specified and directed.

Opening up of fan motor of ceiling/Exhaust/ wall/cabin fans cleaning starter rotor, painting with synthetic enamel paint, cleaning of all parts greasing oiling of bush and bearing reassembling and testing for smooth functioning complete all as specified and as directed.

Hanging only ceiling fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed from ceiling rose to fan connector and testing complete as specified and directed.

M&L for earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

Supply and fixing LED Solar street light fitting 24/25 Watt all in one type including galvanized steel pole 6 m , in built lithium ion battery, solar panel, charge controller with dusk down sensor complete all as specified and as directed. (Excavation & earth work shall be measured separately

M & L for PCC foundation block in cement concrete of 1:2:4) type B1 of dimension1200 x 450x 450 mm for erecting of poles complete all as specified and directed

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe for laying of Electric cable of size 50 mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches,wall, floor , pole including bends, sockets and other connected accessories complete all as specified and directed.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq mm, 4.0 core including testing after laid and jointed all as specified and as directed.

S&F LED fittings IP65 rated InvertedPyramid type LED Bollard with soft 360 deg light distribution 9W, 230V, 50Hz complete on suitable PCC 1:2:4 alongwith suitable connectors to connect with 10sqmm X 4 core cable having protection from water and soil complete all as specified and direceted.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 58,612.94]

SHIV SHANKAR MISHRA

M/s Shrangi Rishi Construction

DEESHA CONSTRUCTIONS

Bidder Name

M/s Shrangi Rishi Construction

SHIV SHANKAR MISHRA

DEESHA CONSTRUCTIONS

Devika Constructions