PROVN OF SHED AT MAIN GATE AND TECH GATE AT AF STN DADRI

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:2:4 type B2 using 40mm graded aggregate as in fdn filling and mass conc complete all as specified and directed by Engineer-in-Charge.

S & F MS pipes as in framed work,purlins rafters struts, vertical members trusses and similar works incl special shape washers etc complete using ERW or induction butt welded tubes confirming to Fe-290 Gde E-165 all as specified and directed by Engr-in-Charge.

S & F MS Plates, holding down bolts nuts, bolts washers screws of any size and sections etc, plates confirming to Fe-290 Gde complete all as specified and directed by Engineer-in-Charge.

Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Preparation of new steel surfaces and applying two coats of synthetic enamelled paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel metalic words"AIR FORCE STATION DADRI" and air force logo (one number), size of words 300mm in height (In Arial Bold Font, height of Airforce logo shall be 300 mm. Approved logo ratio shall be maintained) complete all as specified and directed by Engineer-in-Charge. Prior approval of EIC shall be obtained before procurment by producing look-a-like model of thermacol.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, fixed in wall, on roof with GI saddles GI screws, rawal plugs (concealed conduit in wall wiring) with all fittings including Tee, junction boxes and provision of pressed steel terminal box of suitable size with 3 mm thick hylam laminated white sheet cover for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multistranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and as directed by Engineer-in-Charge. One light/fan point controlled by one switch.

All as per item No 10 above but One socket point on same board with other switches complete all as specified and as directed by Engineer-in-Charge.

All as per item No 10 above but One 3 pin 5 Amps socket outlet independent with cables 1.5 sqmm size complete all as specified and as directed by Engineer-in-Charge.

All same as per item No 10 above but with conductor of size 2.5 Sq mm (nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 1.5 Sq mm PVC insulated stranded copper conductor cable complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular switch 1 way 6A, 1 module complete all as specified and as directed by Engr-in-Charge.

M&L for Modular switch 1 way 16A, 1 module complete all as specified and as directed by Engr-in-Charge.

M&L for Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed by Engr-in-Charge.

M & L for Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.

S&F for Modular plate cover with frame White cover plate with frame, 3 module complete all as specified and as directed by Engineer-in-Charge.

S&F for Modular plate cover with frame White cover plate with frame, 8 module complete all as specified and as directed by Engineer-in-Charge.

Sub main wiring with two single core, 4 Sqmm, PVC insulated PVC unsheathed stranded FR copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 2.5 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and as directed by Engineer-in-Charge.

S& F fixing MCB DB 12 way Amps complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED FLOOD light fitting powder coated PDC aluminium body with toughened glass visior of 70 wattage 5700K IP 66 all as specified and directed by Engr in charge. Polycab/Havells/Hallonix/Philips/Jaquar

S & F LED Tube light battern 1 x 20 W, 230 V , ultra bright with very high efficiency suited for installation G 13 lamp holders to give glare free light etc. complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable and tubes wit suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and as directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and as directed by Engineer-in-Charge.

Returning, filling, including spreading levelling and well ramming in layers not exceeding 25cm apart complete all as specified and directed by Engr -in- charge.

Earthing for poles & other machinery/equipment using 4 mm GI wire as earthing lead and MS galvanized plate of size 60 cm x 60 cm x 6 mm, as earth electrode complete all as specified and as directed by Engineer-in-Charge.

S& F fixing MCB SPN 40 A C Series Amps complete all as specified and directed by Engineer-in-Charge

S& F fixing MCB SP 6- 32 A B series Amps complete all as specified and directed by Engineer-in-Charge

36SHRI RADHEY ASSOCIATES

Shikha Enterprises

GARG CONSTRUCTION CO

M/S Ashoka Engineers and contractors