Construction of Toilet Block Various Location in MBMC Area. (Basic Facility Development Fund)

Amount

Description

ITEM NO :-01 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. (SSR-2022-23 SSR No.-46.09/296)

ITEM NO :-02 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum,including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring andstrutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means (SSR-2022-23 SSR No.-21.03/153)

ITEM NO :-03 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means(SSR-2022-23 SSR No.-21.06/153)

ITEM NO :-04 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete(SSR-2022-23 SSR No.-46.13/296)

ITEM NO :-05 Transportation of the Excavated Material Upto 20KM -Statement C1 SSR 2022-23

ITEM NO :-06 Filling in plinth and floors with approved excavated material in 15cm. to 20cm.Layers including watering and compacting etc. complete.(SSR-2022-23 SSR No.-21.36/157)

ITEM NO :-07 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.(SSR-2022-23 SSR No.-21.37/157)

ITEM NO :-08 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.(SSR-2022-23 SSR No.-21.38/157)

ITEM NO :-09 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(SSR-2022-23 SSR No.-24.08/176)

ITEM NO :-10 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap /granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. includingbailing out water, Steel centering, formwork ,cover blocks, laying/pumping,compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(SSR-2022-23 SSR No.-25.13/178)

ITEM NO :-11 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(SSR-2022-23 SSR No.-25.33/180)

first floor

second floor

terrace floor

ITEM NO :-12 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade)(SSR-2022-23 SSR No.-25.52/181)

first floor

second floor

terrace floor

ITEM NO :-13 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(SSR-2022-23 SSR No.-25.72/182)

first floor

second floor

terrace floor

ITEM NO :-14 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(SSR-2022-23 SSR No.-26.19/185)

First Floor

second floor

terrace floor

ITEM NO :-15 Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(SSR-2022-23 SSR No.-26.07/184)

first floor

second floor

ITEM NO :-16 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(SSR-2022-23 SSR No.-26.33/188)

first floor

second floor

terrace floor

ITEM NO :-17 Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc.complete(SSR-2022-23 SSR No.-31.01/205)

ITEM NO :-18 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.(SSR-2022-23 SSR No.-28.01/199)

ITEM NO :-19 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete(SSR-2022-23 SSR No.-27.05/197)

first floor

second floor

ITEM NO :-20 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.(SSR-2022-23 SSR No.-32.11/209)

first floor

second floor

ITEM NO :-21 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete..(SSR-2022-23 SSR No.-32.04/209)

first floor

second floor

ITEM NO :-22 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.(SSR-2022-23 SSR No.-35.21/225)

first floor

second floor

ITEM NO :-23 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.(SSR-2022-23 SSR No.-36.12/227)

first floor

second floor

ITEM NO :-24 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary (SSR-2022-23 SSR No.-35.26/225)

first floor

second floor

ITEM NO :-25 Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings,cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders)(SSR-2022-23 SSR No.-38.17/235)

first floor

second floor

ITEM NO :-26 Providing,aupplying,fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic)coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weather silicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5 Kilogram/ One Square Metre)(SSR-2022-23 SSR No.-51.100/378)

first floor

second floor

ITEM NO :-27 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete(SSR-2022-23 SSR No.-33.67/220)

ITEM NO :-28 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and onfirming to IS. 15622-2006 ( group Bla) of approved make, hade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.(SSR-2022-23 SSR No.-33.40/217)

first floor

second floor

ITEM NO :-29 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.(SSR-2022-23 SSR No.-33.25/215)

first floor

second floor

ITEM NO :-30 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.(SSR-2022-23 SSR No.-33.34/216)

first floor

second floor

terrace floor

ITEM NO :-31 Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares(SSR-2022-23 SSR No.-39.47/255)

first floor

second floor

ITEM NO :-32 Providing and fixing to frames 30 mm thick Fibre Glass Reinforced Plastic (FRP) panelled / extruded profiled door shutter of approved colour, brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 - 2000 etc complete as directed.(MCGM USOR BLDG 2023 ,R3-CS-PV-02/130)

first floor

Second Floor

ITEM NO :-33 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.(SSR-2022-23 SSR No.-39.29/249)

first floor

ITEM NO :-34 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete.(SSR-2022-23 SSR No.-33.48/218)

ITEM NO :-35 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.(SSR-2022-23 SSR No.-42.20/276)

ITEM NO :-36 Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc(SSR-2022-23 SSR No.-39.31/250)

first floor

second floor

ITEM NO :-37 Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge)(SSR-2022-23 SSR No.-31.06/205)

first floor

ITEM NO :-38 Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram)(SSR-2022-23 SSR No.-42.68/281)

ITEM NO :-39 Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.( SSR-2022-2023 SSR No. 31.09/206

second floor

ITEM NO :40 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75Kilogramwith lid and frame fixed in cement concrete(SSR-2022-23 SSR No.-42.10/274)

ITEM NO :-41 Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)(SSR-2022-23 SSR No.-12.22/85)

ITEM NO :-42 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete(SSR-2022-23 SSR No.-40.07/264)

ITEM NO :-43 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) (SSR-2022-23 SSR No.-31.12/206)

ITEM NO :-44 Providing and constructing BB masonary circular manhole 1.2 m dia at bottom upto a depth of 2.0 M (MJP DSR 2023-24, Item No 06, Page no 285 )

ITEM NO :-45 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.(SSR-2022-23 SSR No.-31.04/205)

ITEM NO :-46 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with waterproofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)(SSR-2022-23 SSR No.-31.13/207)

ITEM NO :-47 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box(SSR-2022-23 SSR No.-39.41/253)

first floor

second floor

ITEM NO :- 48 Providing and fixing informatory sign boards shape of size 0.90 x 0.60 m made out of 3mm Aluminum composite panel bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including M. S. angle iron frame of size 35 mm X 35 mm X 5 mm & M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Aluminum composite panel with Type IV High Intensity Micro-Prismatic Grade Sheeting. Spec.No. As per IRC-67, 2015(SSR-2022-23 SSR No.-6.49/65)

ITEM NO :- 49 Dust Bin (Aluminium) (Refer sketch 11) Product area:0.31Sqm, Capacity in ltrs: 37.0 ltrs, Product height:0.90m (MCGM GARDEN 2013 ,GW-3-2-g / 20)

ITEM NO :- 50 Supply and installation of cubicles of width and depth as per Athena Lite- SS Series Cubicles- Std Sizes (W x D x H): 900 mm x 1550 mm x 2105 mm, (Height is including 100 mm gap from bottom, Door Width- 600 mm specifications/ site drawings). Cubicle height to be 2105 mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature>120°C, All doors will be of single colour and made of 12 mm thick Merino HPL stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing.HARDWARE & ACCESSORIES are H shaped (Top) head frame structure made of extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. U?Channel Wall joinery section,Size to be 22x16x1.6T. Door stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.etc complete.(SSR-2022-23 SSR No.-51.162/395)

first floor

ITEM NO :- 51 GARDEN SOIL:- Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) (PWD Garden SSR 22-23, 1/8)

ITEM NO :- 53 Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata,preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level (SSR-2022-23 SSR No.-48.48/317)

ITEM NO :- 54 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983) (SSR-2022-23 SSR No.-39.26/249)

ITEM NO :- 55 Providing and fabricating structural steel work in rolled sections like joists, channels,angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR-2022-23 SSR No.-23.01/173)

ITEM NO :- 56 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests (MCGM USOR 22-23, R3-CS-PS-1-b )

ITEM NO :- 57 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR-2022-23 SSR No.-42.55/280)

ITEM NO :- 58 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR-2022-23 SSR No.-42.57/280)

ITEM NO :- 59 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.(SSR-2022-23 SSR No.-42.60/280)

ITEM NO :- 60 Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.(SSR-2022-23 SSR No.-48.28/314)

ITEM NO :- 61 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap.(MCGM USOR 22-23, R3-CS-PS-7-k)

ITEM NO :- 62 Providing and laying 100 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete .(SSR-2022-23 SSR No.-42.03/274)

ITEM NO :- 63 Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.(SSR-2022-23 SSR No.-42.85 / 283)

ITEM NO :- 64 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(SSR-2022-23 SSR No.-42.28 / 277)

ITEM NO :- 65 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (SSR-2022-23 SSR No.-11.08/81)

ITEM NO :- 66 Providing,lowering and laying of RCC pipes NP-IV ,250 mm dia (MJP DSR 2023.24 Item No 01 & 02 Page no 110 )

ITEM NO :- 67 Providing and fixing 15mm diameter water meter with non-return valve including strainer, sockets/ union nut including water meter box making locking arrangement and lock. [Without chamber] (SSR-2022-23 SSR No.-41.26 / 269)

ITEM NO :- 68 Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(SSR-2022-23 SSR No.-41.12 / 267)

ITEM NO :- 69 Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(SSR-2022-23 SSR No.-41.13/267)

ITEM NO :- 70 Providing and fixing on walls/ ceiling/ floors, 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kg/meter with necessary fittings and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(SSR-2022-23 SSR No.-41.14/267)

ITEM NO :- 71 Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV (PWD CSR 2023-24 ,13-7-15 / 192)

ITEM NO :- 72 Providing and fixing 50 mm Ball Valve with complete with PN16 pressure rating, as per specification no. FF-VL/BV (PWD CSR 2023-24 ,13-7-41 / 193)

ITEM NO :- 73 Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV (PWD CSR 2023-24 ,13-7-25 / 192)

ITEM NO :- 74 Supplying, erecting, testing and commissioning of minimum three & above star rated submersible pumpset of 3.75 kW/5 HP with 415 V, three phase, 50 Hz A.C. supply suitable for 150 mm dia. borewell with 210 to 860 lpm discharge at 38 to 13 m head & discharge & delivery pipe of size-65mm dia. with a necessary H type clamps as per specification no. WP-SMP.(PWD CSR 2023-24 ,12-2-6 / 168)

ITEM NO :- 75 Supplying, erecting, testing and commissioning of water level controller 230/415 V, A.C. supply , four way under ground & over head tank operation only (PWD CSR 2023-24 ,12-4-15 / 176)

ITEM NO :- 76 Providing and fixing toilet paper holder : C.P. brass (MCGM USOR 2023 ,R3-CS-PS-33-a/168)

ITEM NO :- 77 Low level flushing cistern (SSR 22-23 Item No. 357 pg. 539)

ITEM NO :- 78 Providing and fixing in position various capacity rainwater harvesting dual intensity auto flush open ended at drain outlet filter with working principal of COHESSIVE AND CENTRIFUGAL FORCE having filter element made out of S.S. 304 screen with mesh size of 205 microns having rainfall capacity of 75 m/hr intensity with operating pressure of 0.060Kilogramper sq.cm. of Head with discharge capacity ranging from 10 to 480 lit/min including all necessary accessories like coupler,bends,PVC valve,etc fixing with Bombay nails of required length etc. complete with inlet size of 90 mm to 110 mm diameter from rooftop pipe with drain outlet of 90 mm to 110 mm diameter size with clean water outlet of 62 mm to 90 mm diameter size including fitting and fixing excluding inlet and outlet piping etc complete as per the direction by engineer in chargeFL-100 for the catchment up to 110 sq.m. system size 90 mm diameter inlet, 63 mm diameter clean water outlet, 90 mm diameter drain outlet (filterain,tee,door bend, valve 63mm)(SSR-2022-23 SSR No.-51.228a / 410)

ITEM NO :- 79 Providing & Fixing Hand Dryer, of Following SpecificationMATERIAL: STAINLESS STEEL (304G) POWER : 1800W MOTOR TYPE: CARBON BRUSH MOTOR POWER SUPPLY : 220V/50HZ NOISE LEVEL : 75 DB AIR SPEED : 95M/S DRYING TIME : <10SEC RPM : 25000 WATERPROOF RATE: IPX1 DIMENSION : 295*171*325 MM (Market rate)

ITEM NO :- 80 Supply of Urinal Flushing Automation Systems (Pot Senser) Battery operated With IR Senser with solenoied valves Extra heavy Duty. Hindware. Polished Chrome Brass Integrated Senser for Ceramic Urinal Pots. Easily Replaceable in any Brand Urinal Sensing Range Adjustable(500mm) Touchfree Infira-Red Senser, Easily Servivcable 15mm inlet/outlet orifice Flush Time 7-8 Seconds Postflush Lenth 80mm Width 50mm (Senser "I" Lenth 36mm Width 13mm) (Market Rate)

ITEM NO :- 81 Bosch Advanced Aquatak 160 High Pressure Washer, Flow Rate: 570 L/hr Cable Length: 5m Machine Weight: 23.4kg, Maximum Temp: 40 Degree,C Motor Power: 2600 W Nozzle: Variable HP Foam Nozzle Part Number: 0668A78F0 Brand: Bosch Pump Type: 4-Cylinder Quad Pressure: 160 Bar Flow Rate: 570 Liter/h Hose Length: 8m / PVC Application Area: Professional Work | Car | Truck Model Name/ Number: Advanced Aquatak 160 (Market rate)

ITEM NO :- 82 Supply & Installation of 3d Round Acrylic Acp Sign Board, For Advertisement, Heavy having Specification as follows LETTER - 3MM 040 acrylic letter with BMZ led (2year Warrenty ) & BMZ Power supply ( 1year Warrenty() MIRA BHAYANDER MUNCIPAL BOARD - 4mm ACP SHEET With alumunium pipe Frame with CladdingExtra Support MS Frame & Angle Charges (Market Rate)

ITEM NO :- 83 Supply of Automatic Sanitary Vending machine Nepkin Capacity:50 nos.,With 5 Rs. Coins Acceptable Dimension: 21"x6"x17.5"(LxBxH) Weight 15 kg, Wall Mounted Supply of Automatic Sanitary Vending machine one year warrenty (Market rate)

ITEM NO :- 84 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use)(SSR-2022-23 SSR No.-43.19 / 289)

first floor

second floor

ITEM NO :- 85 Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.(SSR-2022-23 SSR No.-42.31 / 277)

first floor

ITEM NO :- 86 Supplying Rectangular/ Triagular Yellow Caution Wet Floor Sign Board of PVC material (Market rate)

ITEM NO :- 87 Providing and Installation of Stainless Steel Urinals of size 21:x14" of Grade 304 with One year Gaurantee (Market rate)

ITEM NO :- 88 Providing detailed reports of the inspection logging of drilled hole by observing visual description of data as per depth, thicknessof layer, typeof sample,wash sample, bore recovery type of drill etc. complete..(SSR-2022-23 SSR No.-1.56 / 20)

ITEM NO :- 89 Providing detailed geological reports of proposed site bymaintaining geotechnical investigation of structure stratification collecting soil, rock and groundwater samples for laboratory tests to arrive the foundation design parameters .Rock properties suchas type of rock, jointing fractures, etc. complete with suggestion about the item foundation and remedies.(SSR-2022-23 SSR No.-1.57 / 20)

ITEM NO :- 90 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticizedPVCmediumwell-casing pipeof 150mmdia, conformingto IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.(SSR-2022-23 SSR No.-48.49 / 318)

ELECTRICAL SYSTEM

ITEM NO-91 Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW (PWD ELECTRICALS SSR / CSR No.: 1-7-5 / Page No. 11)

ITEM NO-92 Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW (PWD ELECTRICALS SSR / CSR No.: 1-7-6 (NEW) / Page No. 12)

ITEM NO-93 Point wiring for independent plug, concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No WG-PW/SW (PWD ELECTRICALS SSR / CSR No.: 1-7-7 / Page No. 12)

ITEM NO-94 Supplying and installing LSZH sheathed HDPE insulated copper cat-6A cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC (PWD ELECTRICALS SSR / CSR No.: 19-3-4 / Page No. 278)

ITEM NO-95 Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WGPW/SW.(PWD ELECTRICALS SSR / CSR No.: 1-7-11 / Page No. 12)

ITEM NO-96 Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.( PWD ELECTRICALS SSR / CSR No.: 2-1-6 / Page No. 15)

ITEM NO-97 Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF (PWD ELECTRICALS SSR / CSR No.: 2-9-3 / Page No. 25)

ITEM NO-98 Supplying & erecting 20 SWG G.I sheet metal cawl rectangular /round shaped with 25 x 25x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 450 mm as per specification no FG?FAS/MSC (PWD ELECTRICALS SSR / CSR No.: 2-10-19 / Page No. 28)

ITEM NO-99 Supplying and erecting integrated LED flood light fitting Max. 70W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 8400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/SL. (PWD ELECTRICALS SSR / CSR No.: 2-3-14 / Page No. 21)

ITEM NO-100 Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.( PWD ELECTRICALS SSR / CSR No.: 2-3-20 / Page No. 22)

ITEM NO-101 Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. (PWD ELECTRICALS SSR / CSR No.: 2-3-6 / Page No. 20)

ITEM NO-102 Providing & erecting 4 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL (PWD ELECTRICALS SSR / CSR No.: 8-2-10 / Page No. 130)

ITEM NO-103 Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT ( PWD ELECTRICALS SSR / CSR No.: 8-2-19 / Page No. 131)

ITEM NO-104 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP (CSR No.: 9-1-4 / Page No. 140)

ITEM NO-105 Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP (CSR No.: 9-2-3 / Page No. 140)

ITEM NO-106 Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary GI clamps fixed on wall/cable/ conduit with screws complete. ( CSR No.: 9-2-5 / Page No. 140)

ITEM NO-107 Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface / flush mounted, IP 43 protection on iron / GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB (CSR No. 5-4-1 / Page No. 77)

ITEM NO-108 Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No. 5-3-7 / Page No. 76)

ITEM NO-109 Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB( CSR No. 5-3-13 / Page No. 76)

ITEM NO-110 Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. (CSR No. 6-1-1 / Page No. 89)

ITEM NO-111 Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 300A having 40mm (Width) X 5 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CPBB (CSR No. 6-2-3 / Page No. 91)

ITEM NO-112 Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. (CSR No. 6-5-7 / Page No. 99)

ITEM NO-113 Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. (CSR No. 6-5-8 / Page No. 99)

ITEM NO-114 Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard (CSR No. 6-1-20 / Page No. 90)

ITEM NO-115 Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. (CSR No. 6-7-2 / Page No. 125)

ITEM NO-116 Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. (CSR No. 6-7-5 / Page No. 126)

ITEM NO-117 Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. (CSR No. 6-7-6 / Page No. 126)

ITEM NO-118 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No. 5-3-1 / Page No. 100)

ITEM NO-119 Providing & erecting 3 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification no. SW-SWR/MCCB (CSR No. 5-5-6 / Page No. 103)

ITEM NO-120 Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification no. SW-SWR/MCCB (CSR No. 5-5-3 / Page No. 103)

ITEM NO-121 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR No.: 7-1-28 / Page No. 139)

ITEM NO-122 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR No.: 7-1-7 / Page No. 137)

ITEM NO-123 Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPE armoured cable as per specification No. CB-GL (CSR No.: 7-7-2 / Page No. 153)

ITEM NO-124 Supplying & erecting single compression type brass cable glands for 2 to 4core 2.5 sq mm /2 to 4 core 4 sq mm /2 core 6 sq mm for XLPE armoured cable as per specification No. CB-GL (CSR No.: 7-7-1 / Page No. 153)

ITEM NO-125 Supplying & erecting crimping type aluminium lugs for cable up to 16 sq mm complete as per specification No. CB-CL/AL (CSR No.: 7-10-1 / Page No. 155)

ITEM NO-126 Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. (Item No. 13-14-1 / Page No. 246)

ITEM NO-127 Supplying & erecting minimum three & above star rated Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 22.5 KW/30 HP with discharge 1700/400 Litres per Minute (LPM) for head of 48/69 m and 100mm suction/ 80mm delivery pipe of size, on provided C.C. foundation as per specification No. WP-CGP (PWD ELECTRICALS SSR / CSR No.: 12-1-16 / Page No. 213)

ITEM NO-128 Supplying and fixing 42 U floor mount server rack (Dimension -DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK (PWD ELECTRICALS SSR / CSR No.: 19-5-30 / Page No. 28)

ITEM NO-129 Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/GBS (PWD ELECTRICALS SSR / CSR No.: 19-4-8 (New) / Page No. 25)

ITEM NO-130 Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD (PWD ELECTRICALS SSR / CSR No.: 19-6-21 / Page No. 296)

ITEM NO-131 Supplying & erecting of High definition 2 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 30m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 30m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM.

ITEM NO-132 Supplying & erecting of High definition 2 Megapixel IP IR Bullet Camera with following features : Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 30m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 30m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security- User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no.CCTV-CAM

ITEM NO-133 Supplying, installing, testing and commissioning of 3 kWp ON-GRID Solar pV System / Plant consisting solar PV poly crystalline panel (335 Wp X 09 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liasoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS system, complete upto net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per specification no. ESD-RT-ONG

ITEM NO-134 Supplying and installation of solar PV module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 5 kWp Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area)

Gajanan Construction (BID ID -6433082)