CONSTRUCTION OF TOURIST INFORMATION CENTRE AT TAKHT HARIMANDIR SAHIB JI PATNA CITY UNDER PATNA DISTRICT.

Bihar State Tourism Development Corporation

Name of Work CONSTRUCTION OF TOURIST INFORMATION CENTRE AT TAKHT HARIMANDIR SAHIB JI PATNA CITY UNDER PATNA DISTRICT. Cost of Work as per BOQ `Rs.-6499146.00 Time of Completion 03 Month

Sl No. Items Requirement

Name of the Contractor

Address of the Contractor

1 Earnest Money Bid Security Amount - Rs. 139000.00 Bid Security Amount - Rs.

2 The Agency should have executed at least one work of Similar Nature, costing not less than 60% value of the Estimated Cost of the tendered work during last three years.

3 Registration Certificate of any Department / Board / Corporation.

4 I.T.Registration, Clearance & G.S.T. Registration Certificate

5 Vaild Character Certificate issued by District Magistrate / S.P

6 Affidavit for blacklisting and debar.

7 Annual Turnover last Three Years.

8 Details of Tools & Plants including Quality control equipment

9 Experience Certificate

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LIMITED

FINANCIAL BID FORM

TO BE FILLED IN BY BIDDER

Name of Work CONSTRUCTION OF TOURIST INFORMATION CENTRE AT TAKHT HARIMANDIR SAHIB JI PATNA CITY UNDER PATNA DISTRICT.

Estimated Cost 6499146.00

a. If a bidder is willing to execute the works, say, at the estimated cost, he/ she must fill in "0" in front of 'in figures' and "ZERO" in front of 'in words' and "AT THE ESTIMATED COST" in front of 'Above or below'.

b. If a bidder is willing to execute the works, say, at 2.45 percent below the estimated cost, he/she must fill in "2.45" in front of 'in figures' and "TWO POINT FOUR FIVE" in front of 'in words' and "BELOW" in front of 'Above or below'.

Sl. No. What to fill in the colour cells Fill in the four colored cells below

1 Name of Contractor

2 Percent above or below the estimated Cost in figures

4 Above or Below

BILL OF QUANTITY FOR DEVELOPMENT OF TIC AT TAKHT HARMANDIR SAHIBJI, PATNA CITY

BASED ON S.O.R. B.C.D.GOVT. OF BIHAR EFFECTIVE FROM 01/01/2022/MR

SL.NO DESCRIPTION UNIT QTY. RATE AMOUNT

(IN DIGIT) (IN WORD)

SUBHEAD-A(SOR ITEMS)

1 15.7 Demolishing brick work including stacking of serviceable materialand disposal of unserviceable material within 50 meters lead:

15.7.4 In cement mortar cum 5.33 823.70 Rupees Eight Hundred TwentyThree Paise Seventy Only 4390.32

2 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.. sqm 170.11 106.70 Rupees One Hundred Six Paise Seventy Only 18150.74

3 15.57 Dismantling alumiuium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 m lead as directed by Engineer-in-charge. sqm 48.81 23.70 Rupees TwentyThree Paise Seventy Only 1156.80

4 15.4 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: cum 1.12 1411.20 Rupees One Thousand Four Hundred Eleven Paise Twenty Only 1580.54

5 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead.

15.13.1 Of area 3 sqm and below each 7.00 58.90 Rupees FiftyEight Paise Ninety Only 412.30

6 SOR 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed

2.6.1 All kinds of soil Cum 34.01 314.90 Rupees Three Hundred Fourteen Paise Ninety Only 10709.75

7 SOR 2.8 Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms,lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m

SOR 2.8.1 All kind of soil Cum 59.07 360.70 Rupees Three Hundred Sixty Paise Seventy Only 21306.55

8 SOR 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead Cum 34.01 123.90 Rupees One Hundred TwentyThree Paise Ninety Only 4213.84

9 SOR 2.27 Extra for every additional lift of 1.5 m or part thereof in :

2.27.1 All kinds of soil Cum 6.52 49.40 Rupees FourtyNine Paise Fourty Only 322.09

10 SOR 2.28 Supplying and filling in plinth with sand under floors including watering,ramming consolidating and dressing complete Cum 3.57 287.30 Rupees Two Hundred EightySeven Paise Thirty Only 1025.66

11 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1.3 1:2:4(1 Cement :2 coarsesand:4 graded stone aggregate 20mm nominal size) cum 156.66 3998.10 Rupees Three Thousand Nine Hundred NinetyEight Paise Ten Only 626342.35

12 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in :

6.18A.4+ 6.19A Cement mortar 1:4 (1 cement: 4 coarse send) sqm 22.13 689.00 Rupees Six Hundred EightyNine Only 15247.57

13 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete

11.41.2 Size of Tile 60x60 cm sqm 153.39 1638.80 Rupees One Thousand Six Hundred ThirtyEight Paise Eighty Only 251375.53

14 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

11.46.2 Size of Tile 600 x 600 mm. sqm 55.69 1191.80 Rupees One Thousand One Hundred NinetyOne Paise Eighty Only 66371.34

15 SOR' 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per specification and direction of E/I. Per M2 31.73 283.30 Rupees Two Hundred EightyThree Paise Thirty Only 8989.11

16 SOR 6.1A Brick work with F.P.S bricks of class designation 75 in foundation and plinth in:

SOR 6.1.14A Cement morter 1:6(1 cement : 6 corse sand) Cum 8.66 4819.90 Rupees Four Thousand Eight Hundred Nineteen Paise Ninety Only 41740.33

17 SOR 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in :

6.18.4A Cement mortar 1:4 ( 1 cement: 4 coarse sand) Sqm 3.36 599.30 Rupees Five Hundred NinetyNine Paise Thirty Only 2013.65

18 SOR 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall. Sqm. 45.86 229.30 Rupees Two Hundred TwentyNine Paise Thirty Only 10515.70

19 SOR 5.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.

5.2.3 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Cum 0.26 5214.10 Rupees Five Thousand Two Hundred Fourteen Paise Ten Only 1355.67

20 SOR 5.3. Reinforced cement concrete work in beams,suspended floors roofs,having slope upto 15, landing,balconies, shelves, chajjas, lintal, bends,plain window sills stair case,and spiral staircases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement with 1:2:4 Cum 13.17 5335.90 Rupees Five Thousand Three Hundred ThirtyFive Paise Ninety Only 70273.80

21 SOR 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

5.9.1 Foundations, footings, bases of columns etc. for mass concrete. Sqm 19.08 211.60 Rupees Two Hundred Eleven Paise Sixty Only 4037.33

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 4.95 404.70 Rupees Four Hundred Four Paise Seventy Only 2003.27

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 72.68 494.40 Rupees Four Hundred NinetyFour Paise Fourty Only 35932.99

5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sqm 18.58 437.50 Rupees Four Hundred ThirtySeven Paise Fifty Only 8128.75

22 SOR 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

SOR 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. Kg 890.00 94.50 Rupees NinetyFour Paise Fifty Only 84105.00

SOR 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. Kg 519.00 92.60 Rupees NinetyTwo Paise Sixty Only 48059.40

5.22.7c Thermo-Mechanically Treated bars TMTC-500-12mm dia. Kg 184.00 90.80 Rupees Ninety Paise Eighty Only 16707.20

23 13.80.A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 284.42 105.40 Rupees One Hundred Five Paise Fourty Only 29977.87

24 13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary pain+ of approved brand and manufacture sqm 284.42 116.50 Rupees One Hundred Sixteen Paise Fifty Only 33134.93

25 12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl ,plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutoutsmade with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I Sqm 95.30 828.20 Rupees Eight Hundred TwentyEight Paise Twenty Only 78927.46

26 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

8.2.2.1 Area of slab upto 0.50 sqm Sqm 2.41 4242.90 Rupees Four Thousand Two Hundred FourtyTwo Paise Ninety Only 10225.39

27 26A.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: Sqm 51.95 3111.40 Rupees Three Thousand One Hundred Eleven Paise Fourty Only 161637.23

28 26.42 Providing and fixing of external wall system on Light gauge steel frame work with outer face cement boards as per standard sizes fixed with self- drilling/ taping rews/ fasteners @ 60cm c/c of approved make.A groove of 2mm to3mm shall be maintained and grooves shall be sealed with silicon based sealant.The board shall befixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. Internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self- drilling/ taping screws/ fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cos of frame work to be paid for separately)

26.42.1 Outer face: Outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, Type A, as per IS:14862:2000 (high pressure steam cured) Inner Face :- 12.5 mm thick gypsum plaster board conforming to IS 2095:2011 fixed on 8 mm thick fibre cement board confirming to S:14862:2000 of type B (High pressure steam cured) Sqm 62.29 3088.90 Rupees Three Thousand EightyEight Paise Ninety Only 192407.58

29 Add Carriage of Materials with Loading & Unloading

Bricks 100A(local lead 1K+7P) ‰ No. 4662.00 1140.59 Rupees One Thousand One Hundred Fourty Paise FiftyNine Only 5317.43

Coarse sand from Koilwar cum 9.97 1636.78 Rupees One Thousand Six Hundred ThirtySix Paise SeventyEight Only 16318.68

Stone Chips from Koderma cum 14.27 1978.21 Rupees One Thousand Nine Hundred SeventyEight Paise TwentyOne Only 28229.06

Local Sand ( Lead local 1K+2P) cum 4.04 310.47 Rupees Three Hundred Ten Paise FourtySeven Only 1254.30

30 Diffrences cost of materials 0.00

Bricks 100A ‰ No. 4662.00 1606.89 Rupees One Thousand Six Hundred Six Paise EightyNine Only 7491.30

Cement Tone 9.51 265.41 Rupees Two Hundred SixtyFive Paise FourtyOne Only 2524.01

31 SOR 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lif, 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings & C.I brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

17.3.1 W.C pan with ISI marked white solid plastic seat and lid Each 2.00 5504.30 Rupees Five Thousand Five Hundred Four Paise Thirty Only 11008.60

32 SOR 17.7 Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

17.7.1 White Vitreous China Wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps. Each 4.00 2764.40 Rupees Two Thousand Seven Hundred SixtyFour Paise Fourty Only 11057.60

33 SOR 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

17.70.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260 gms. Each 4.00 335.20 Rupees Three Hundred ThirtyFive Paise Twenty Only 1340.80

34 SOR 17.34 Provding and fixing Toilet Paper.holder

17.34.2 Vitreous china Each 2.00 332.90 Rupees Three Hundred ThirtyTwo Paise Ninety Only 665.80

35 SOR 17.71 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. Each 4.00 146.30 Rupees One Hundred FourtySix Paise Thirty Only 585.20

36 SOR 17.72 Providing and fixing PTMT towel ring trapezodial shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Each 2.00 204.70 Rupees Two Hundred Four Paise Seventy Only 409.40

37 SOR 17.31 Provding and fixing 600X450mm beveled edge mirror of superior glass complete with 6mm thick hard board ground fixed to wooden cieats with CP brass screws & washers complete. Each 4.00 1068.50 Rupees One Thousand SixtyEight Paise Fifty Only 4274.00

38 SOR 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20 mm Nominal outer dia pipes Metre 3.00 233.90 Rupees Two Hundred ThirtyThree Paise Ninety Only 701.70

18.7.3 25 mm Nominal outer dia pipes Metre 22.00 317.30 Rupees Three Hundred Seventeen Paise Thirty Only 6980.60

18.7.4 32 mm Nominal outer dia pipes Metre 16.00 395.20 Rupees Three Hundred NinetyFive Paise Twenty Only 6323.20

39 SOR 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

18.8.1 15 mm Nominal outer dia pipes Metre 2.00 278.20 Rupees Two Hundred SeventyEight Paise Twenty Only 556.40

18.8.2 20 mm Nominal outer dia pipes Metre 6.00 350.80 Rupees Three Hundred Fifty Paise Eighty Only 2104.80

18.8.3 25 mm Nominal outer dia pipes Metre 4.00 463.10 Rupees Four Hundred SixtyThree Paise Ten Only 1852.40

40 SOR 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.4 32 mm nominal outer dia pipes Metre 20.00 359.10 Rupees Three Hundred FiftyNine Paise Ten Only 7182.00

41 SOR. 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality.

18.17.1 25 mm Nominal bore Each. 2.00 532.30 Rupees Five Hundred ThirtyTwo Paise Thirty Only 1064.60

18.17.2 32 mm Nominal bore Each. 3.00 589.90 Rupees Five Hundred EightyNine Paise Ninety Only 1769.70

42 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end).

18.19.2 32mm nominal bore

18.19.2.2 Vertical Each. 1.00 777.90 Rupees Seven Hundred SeventySeven Paise Ninety Only 777.90

43 SOR 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions.

18.21.2 45 cm length

18.21.2.1 15 mm Nominal bore Each. 6.00 85.20 Rupees EightyFive Paise Twenty Only 511.20

44 SOR 18.46 Providing and fixing G.I. union in G.I.pipe including cutting and threading the pipe and making long screws etc.

18.46.3 25 mm dia. Nominal bore Each. 2.00 265.90 Rupees Two Hundred SixtyFive Paise Ninety Only 531.80

18.46.4 32 mm dia. Nominal bore Each. 3.00 306.00 Rupees Three Hundred Six Only 918.00

45 SOR 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS :8931.

18.49.1 15 mm Nominal bore Each 2.00 434.20 Rupees Four Hundred ThirtyFour Paise Twenty Only 868.40

46 SOR 18.53 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

18.53.1 15 mm Nominal bore Each 6.00 500.40 Rupees Five Hundred Paise Fourty Only 3002.40

47 SOR 18.58 Providing and fixing PTMT grating of approved quality and colour.

18.58.2 Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating Each 4.00 169.70 Rupees One Hundred SixtyNine Paise Seventy Only 678.80

48 SOR 18.33 Constructing masonry Chamber 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:

18.33.1 With common burnt clay F.P.S (non modular) bricks of class designation 100 A Each 1.00 7210.60 Rupees Seven Thousand Two Hundred Ten Paise Sixty Only 7210.60

49 18.48 Providing and placing on terrace polythethylene water storage tank ISI. :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (1000x1=1000) per litre 1000.00 9.70 Rupees Nine Paise Seventy Only 9700.00

50 SOR 2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m:

2.10.1 All kinds of soil

2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Metre 61.40 391.70 Rupees Three Hundred NinetyOne Paise Seventy Only 24050.38

51 SOR 19.01 Providing, laying and jointing glazed stoneware pipes class SP-1 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete.

19.1.2 150mm diameter Metre 2.40 464.30 Rupees Four Hundred SixtyFour Paise Thirty Only 1114.32

52 SOR 19.02 Providing and laying cement concrete 1:5:10( 1 cement: 5 coarse sand:10 graded stone aggregate 40mm nominal size) all-round S.W pipes including bed concrete as per standard design.

19.2.2 150mm diameter S.W pipe Metre 2.40 494.40 Rupees Four Hundred NinetyFour Paise Fourty Only 1186.56

53 SOR 19.4 Providing and fixing square mouth SW gully trap grade A complete with CI grating brick masonry chamber with water tight CI cover with frame of 300X300mm size(inside) the wt. of cover to be not less than4.50kg. And frame to not less than 2.70 kg. as/standard design

19.4.3 180x150mmsize p type

19.4.3.1 With F.P.S. bricks designation 7.5 Each 2.00 1994.10 Rupees One Thousand Nine Hundred NinetyFour Paise Ten Only 3988.20

54 SOR 19.6 Providing and laying non -pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc.

19.6.2 150 mm dia R.C.C. pipe Metr. 59.00 410.70 Rupees Four Hundred Ten Paise Seventy Only 24231.30

55 SOR 19.18 Supplying and fixing C.I cover without frame for manholes:

SOR 19.18.2 500 mm diameter C.I cover (medium duty) the weiht of he cover to be not less than 58 kg. Each 6.00 3164.60 Rupees Three Thousand One Hundred SixtyFour Paise Sixty Only 18987.60

56 SOR 19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design

19.15.1 With 20x20mm square bar Each 20.00 310.90 Rupees Three Hundred Ten Paise Ninety Only 6218.00

57 SOR 19.30 Constructing brick masonry chamber for underground C.I inspection chamber and bends with 75 class designation bricks in cement mortr 1:4( 1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab ith 1:2:4 mix ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) foundtion concrete 1:5:10( 1 cement: 5 fine sand:10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

19.30.1 Inside dimensions 455x610mm and 45cm deep for single pipe line:

19.30.1.1 With F.P.S bricks Each 9.00 4266.80 Rupees Four Thousand Two Hundred SixtySix Paise Eighty Only 38401.20

58 SOR 19.31 Extra for depth beyond 45cm of brick masonry chamber:

19.31.1 For 455x610mm size

19.31.1.1 With F.P.S bricks Metre 0.90 3946.20 Rupees Three Thousand Nine Hundred FourtySix Paise Twenty Only 3551.58

59 SOR 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with brick of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

19.32.1 With F.P.S. bricks Each 1.00 33603.40 Rupees ThirtyThree Thousand Six Hundred Three Paise Fourty Only 33603.40

60 SOR 24.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

24.1.1 All types of soil

24.1.1.1 300 mm dia Mtrs. 130.00 486.80 Rupees Four Hundred EightySix Paise Eighty Only 63284.00

61 SOR 24.2 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.

24.2.1 All types of soil

24.2.1.1 300 mm dia Mtrs. 30.00 567.90 Rupees Five Hundred SixtySeven Paise Ninety Only 17037.00

62 SOR 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

24.3.1 100 mm nominal size dia Mtrs. 45 546.10 Rupees Five Hundred FourtySix Paise Ten Only 24574.50

24.3.2 150 mm nominal size dia Mtrs. 67 660.10 Rupees Six Hundred Sixty Paise Ten Only 44226.70

63 SOR 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

24.4.1 100 mm nominal size dia Metre 30 573.10 Rupees Five Hundred SeventyThree Paise Ten Only 17193.00

64 SOR 24.8 Gravels packing in tubewell construction in accordance with IS 4097 including providing graval fine/medium/coarse,in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in charge. cu_m 7.08 1343.20 Rupees One Thousand Three Hundred FourtyThree Paise Twenty Only 9509.86

65 SOR 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hrs 36 916.80 Rupees Nine Hundred Sixteen Paise Eighty Only 33004.80

66 SOR 24.13 Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing/ casing pipe ,removable as per requirement,all complete for borewell of,

24.13.2 150 mm dia each 2 210.70 Rupees Two Hundred Ten Paise Seventy Only 421.40

67 SOR 24.14 Providing & fixing MS clamp of required dia to the top of housing/casing pipe of,removable as pe tubewell as per IS;2800(part-I), including necessary bolts & nuts of required size complete

24.14.2 150 mm dia each 2 1531.40 Rupees One Thousand Five Hundred ThirtyOne Paise Fourty Only 3062.80

68 SOR 24.15 Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I),

24.15.1 100mm dia each 1 228.30 Rupees Two Hundred TwentyEight Paise Thirty Only 228.30

69 SOR 12.78 Providing and fixing on wall face PVC (working pressure 4kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.78.2 110 mm diameter Metre 30.00 257.50 Rupees Two Hundred FiftySeven Paise Fifty Only 7725.00

70 SOR 12.79 Providing and fixing on wall face PVC moulded fitting / accessories for rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.79.1 Coupler

12.79.1.2 110 mm Each 6.00 120.00 Rupees One Hundred Twenty Only 720.00

12.79.2 Single pushfit Coupler:

12.79.2.2 110 mm Each 6.00 374.60 Rupees Three Hundred SeventyFour Paise Sixty Only 2247.60

12.79.5.2 110 mm bend Each 8.00 132.00 Rupees One Hundred ThirtyTwo Only 1056.00

71 SOR 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

12.80.2 110 mm Each 12.00 182.72 Rupees One Hundred EightyTwo Paise SeventyTwo Only 2192.64

72 SOR 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Each 8.00 47.90 Rupees FourtySeven Paise Ninety Only 383.20

73 SOR 24.4 Supplying,assembling,lowering and fixing in virtical position in borewell ,unplasticized PVC medium well screen (RMS) pipes with ribs , confirming to IS:12818,including required hire and labour charges,fittings and accessories etc. all complete, for all depths, as per direction of Engineer-in-charge

SOR 24.4.2 150 mm nominal dia metre 6.00 673.50 Rupees Six Hundred SeventyThree Paise Fifty Only 4041.00

74 SOR 24.5 Supplying , filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in Recharge Pit,in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3.50 1188.90 Rupees One Thousand One Hundred EightyEight Paise Ninety Only 4161.15

75 SOR 24.6 Supplying , filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the Recharge Pit,over the existing layer boulders in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3.08 1195.60 Rupees One Thousand One Hundred NinetyFive Paise Sixty Only 3682.45

76 SOR 24.7 Supplying , filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm, in the Recharge Pit, in the required thickness over gravel layer ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3.14 1195.60 Rupees One Thousand One Hundred NinetyFive Paise Sixty Only 3754.18

77 SOR 19.7 Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:

19.7.1 Inside size 90x80cm and 45cm deep including C.I cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

19.7.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 1.00 7914.70 Rupees Seven Thousand Nine Hundred Fourteen Paise Seventy Only 7914.70

78 SOR 19.8 Extra for depth for manholes

19.8.1 Size 90x80cm

19.8.1.1 With F.P.S bricks class designation 75 Metre 0.10 5660.00 Rupees Five Thousand Six Hundred Sixty Only 566.00

Add 5.36 % GST on SOR Item as per BCD 129299.68

79 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 7.00 2482.00 Rupees Two Thousand Four Hundred EightyTwo Only 17374.00

80 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required Each 7.00 358.00 Rupees Three Hundred FiftyEight Only 2506.00

91 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

8.17.1 300 mm sweep Each 2.00 2572.00 Rupees Two Thousand Five Hundred SeventyTwo Only 5144.00

82 5.3 Supplying and fixing 4'x20 watt LED batten with minimum efficacy 100lm/w in aluminoum housing and complete with integrated electronic driver etc. directly on ceiling / wall including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor single core cable etc. as required. Each 11.00 762.00 Rupees Seven Hundred SixtyTwo Only 8382.00

83 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

5.8.3 18 watt Each 29.00 1694.00 Rupees One Thousand Six Hundred NinetyFour Only 49126.00

5.8.1 9/10 watt Each 2.00 911.00 Rupees Nine Hundred Eleven Only 1822.00

87 1.34 Supplying and fixing batten / angle holder including connections etc. as required. Each 9.00 80.00 Rupees Eighty Only 720.00

85 6.1 Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required.

6.1.6 15 watt LED lamp Each 9.00 250.00 Rupees Two Hundred Fifty Only 2250.00

86 5.1 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 12.00 1275.00 Rupees One Thousand Two Hundred SeventyFive Only 15300.00

87 1.33 Supplying and fixing 2 pin 5 Amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 13.00 64.00 Rupees SixtyFour Only 832.00

88 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps moduler socket outlet & 6A modular type switch connection etc. as required. Point 24.00 414.00 Rupees Four Hundred Fourteen Only 9936.00

89 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/ 16 amps moduler socket outlet & 15/16A modular type switch connection etc. as required. Point 7.00 531.00 Rupees Five Hundred ThirtyOne Only 3717.00

90 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 3.00 683.00 Rupees Six Hundred EightyThree Only 2049.00

91 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Each 5.00 131.00 Rupees One Hundred ThirtyOne Only 655.00

1.24.7 TV antenna socket outlet Each 4.00 131.00 Rupees One Hundred ThirtyOne Only 524.00

92 1.27 Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches/ socket/TV / Telephone outlet in surface/ recess etc. as required.

1.27.1 75mmX75mmX50mm Each 9.00 234.00 Rupees Two Hundred ThirtyFour Only 2106.00

93 MP PWD 38.4 Supply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below

MP PWD 38.4.1 10 Pair Each 1.00 817.74 Rupees Eight Hundred Seventeen Paise SeventyFour Only 817.74

94 1.26 Supplying and fixing modular blanking plate on the existing modular plate & metal box excluding modular plate, etc. as required. Each 10.00 34.00 Rupees ThirtyFour Only 340.00

95 Supplying and fixing metal/ PVC box of following sizes ( nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

1.22.1 75mmX75mmX50mm deep Each 4.00 139.00 Rupees One Hundred ThirtyNine Only 556.00

1.22.6 200mmX150mmX60mm deep Each 2.00 276.00 Rupees Two Hundred SeventySix Only 552.00

96 1.3 Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch , modular plate suitable size G.I. box etc as required.

1.3.3 Group C Point 70.00 1146.00 Rupees One Thousand One Hundred FourtySix Only 80220.00

97 Wiring for group controlled (looped) light point/ fan point/ exhaust fan point / call bell point (without independent Switch etc.) with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit etc as required.

1.59.3 Group C Point 14.00 609.00 Rupees Six Hundred Nine Only 8526.00

98 1.5 Wiring for power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No.4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as required Meter 200.00 309.00 Rupees Three Hundred Nine Only 61800.00

99 1.7 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 350.00 246.00 Rupees Two Hundred FourtySix Only 86100.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 80.00 422.00 Rupees Four Hundred TwentyTwo Only 33760.00

100 Supplying & fixing of following size medium class PVC conduit along with accessories in surface/ recess including cutting of wall and making good the same in case of recessed conduit as required.

1.21.1 20 mm dia Meter 100.00 102.00 Rupees One Hundred Two Only 10200.00

1.21.2 25 mm dia Meter 80.00 120.00 Rupees One Hundred Twenty Only 9600.00

101 1.17 Supplying and drawing co-axial W cable RG-6 grade, 0.7mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed PVC conduit as required. Meter 100.00 42.00 Rupees FourtyTwo Only 4200.00

102 1.16 Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required.

1.16.2 2 Pair Meter 100.00 31.00 Rupees ThirtyOne Only 3100.00

103 MP PWD 38.3 Supply installation, testingand commissioningof 0.5mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filledwithpoly-al laminatemoisturebarrier, polythene sheathed, armoured polythene jacketed telephone cables as per DOT specifications of following sizes

MP PWD 38.3.1 10 Pair Meter 30.00 204.14 Rupees Two Hundred Four Paise Fourteen Only 6124.20

MAIN PANEL & D.B.s

104 2.9 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.8.7 12 way, Double door Each 2.00 2314.00 Rupees Two Thousand Three Hundred Fourteen Only 4628.00

105 2.32 Supplying and fixing cable end box ( Loose wire box , IP 43) suitable for following sheet steel M.C.B. Distribution board, on surface/ recess, complete with testing commissioning etc. as required

2.32.3 For 14 way, Double door SPN MCBDB Each 2.00 1064.00 Rupees One Thousand SixtyFour Only 2128.00

106 Supplying and fixing of following rating C series MCB suitable for inductive and other loads of following poles in the existing MCB DB complete witth connections ,testing and commissioning etc. as required .

2.12.1 6 Amp. To 32 Amp. SP MCB 240 Volt Each 24.00 237.00 Rupees Two Hundred ThirtySeven Only 5688.00

2.12.2 32 Amp SPN MCB 240 Volt Each 2.00 606.00 Rupees Six Hundred Six Only 1212.00

107 2.14 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 2.00 13.00 Rupees Thirteen Only 26.00

108 Providing and fixing of following rating electrical items in existing cubical panel including drilling holes in if required, making connections etc. as required .

2.12.2 32 Amp SPN MCB 240 Volt Each 2.00 606.00 Rupees Six Hundred Six Only 1212.00

109 DSR EnM 2025 40.3 Supplying Installation Testing and Commissioning of 4MP IP IR Dome Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

DSR EnM 2025 40.3 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps , Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

DSR EnM 2025 40.3 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

40.3.1 4MP @ 25/30fps@1440P (2560 x 1440) Dome Camera with 2.8/ 3.6/ 6/8/12 mm fixed lens (as per site requirement). Each 11.00 10365.00 Rupees Ten Thousand Three Hundred SixtyFive Only 114015.00

110 DSR EnM 2025 40.4 Supplying Installation Testing and Commissioning of 4MP IP IR Outdoor Bullet Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

DSR EnM 2025 40.4 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

DSR EnM 2025 40.4 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

40.4.1 4MP @ 25/30fps@1440P (2560 x 1440) Outdoor Bullet Camera with 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) Each 4.00 10063.00 Rupees Ten Thousand SixtyThree Only 40252.00

111 DSR 2025 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

39.23.1 6U Rack Each 2.00 6939.00 Rupees Six Thousand Nine Hundred ThirtyNine Only 13878.00

112 1.58.1 Supplying and drawing of UTP 4 Pair CAT-6 LAN cable in the existing surface / recessed PVC concuit etc. as required. Meter 240.00 52.00 Rupees FiftyTwo Only 12480.00

113 1.21 Supplying & fixing of following size medium class PVC conduit along with accessories in surface/ recess including cutting of wall and making good the same in case of recessed conduit as required.

1.21.1 20 mm dia Meter 120.00 102.00 Rupees One Hundred Two Only 12240.00

114 DSR EnM 2025 40.10 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses for number of channels of NVR to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP, IR camera or more and must be ONVIF with minimum support of 256Mbps incoming Bandwidth 2) NVR should support H.265 or better, H.264, MJPEG, MPEG4 support 3) Must support 1 channel Input, 1 channel Output, RCA for Two-way Talk 4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 2 SATA Slots with 20TB capacity/ Slot. 6) Connectivity Interface : 1 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232 7) Backup Interface : Its should have 2 Nosx USB port (1x USB3.0, 1xUSB2.0) 8) Video Output Ports: 1x HDMI and 1 VGA 9) Alarm Ports: It should have 4/1 Ch In/ Out ports to connect various type of external sensors and output devices like hooter/ Siren etc.

DSR EnM 2025 40.10 10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic 11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing. 12) Protocols: HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS, SMTP, UPnP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC, RoHS and BIS Certified 14) Power Supply : Should support 12VDC, 4Amp or AC100-240V, 50/60Hz Power supply. 15) Operating Condition : Ambient Temperature (-5°C to 50°C), humidity 90% (max) (non-condensing) 16) The VMS, NVR application shall support all the features & functionalities of the offered cameras. 17) VMS should consist of Base license and Channel Licenses. VMS should be provided with camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage.

DSR EnM 2025 40.10 19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote monitoring over the Internet. 20) Must support Resolution: 7680x4320 (8K), 3840*2160, 1920×1080, 1280×1024,1280×720, 1024×768 21) Must support recording resolution upto 32MP 22) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 23) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page 24) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm. 25) It should support Network Support: HTTP, TCP/IP, SMTP, DHCP, DNS, DDNS, FTP, NTP, UPnP, Multi IP Setting. Convert multiple recording files to one avi/MP4 file. 26) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection.

DSR EnM 2025 40.10 27) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan 28) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 29) Built-In Artificial Intelligence: NVR should have built-in AI :- - 2 Channel face detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection 30) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or more with Face Detection speed of 12 face images/sec. 31) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender and umbrella. 32) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body, vehicle model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes.

DSR EnM 2025 40.10 33) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan, cybersecurity exception 34) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 35) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection. 36) Smart playback function: Should support smart search for the selected area in the video and smart playback to improve the playback efficiency 37) VCA (Video Content Analytic): Should support multiple video contented analytics based on camera analytics

40.10.1 08 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9, 2nd screen: 1/4/8/9 Each 2.00 10078.00 Rupees Ten Thousand SeventyEight Only 20156.00

115 DSR EnM 2025 40.12 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

40.12.1 4TB (Terabytes) Each 2.00 13943.00 Rupees Thirteen Thousand Nine Hundred FourtyThree Only 27886.00

116 DSR EnM 2025 39.1 Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

39.1.1 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. Each 2.00 35091.00 Rupees ThirtyFive Thousand NinetyOne Only 70182.00

117 42.4 Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required.

42.4.1 32 inch or larger Each 2.00 39590.00 Rupees ThirtyNine Thousand Five Hundred Ninety Only 79180.00

SUBHEAD-B(NON SCHEDULE ITEMS)

118 M/R Removal of aluminium panel for Recovery sqm 47.55 1250.00 Rupees One Thousand Two Hundred Fifty Only 59437.50

119 M/R DIGITAL 2D/3D WALL PAPER : Providing & fixing 2d/3d digital printing printing on approved paper/canvas/fabric media as per suggested graphic work on suggested surface .Contractor shall provide graphic work detail & 5 sqmm sample for approval the work shall be done inclusive of all rate with accesesories,tool tackel at allheight compelte. sqm 46.16 2312.00 Rupees Two Thousand Three Hundred Twelve Only 106721.92

120 M/R Wooden ceiling: Providing and fixing at all height false ceiling of 12mm thick MR garde plyboard including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS:277 and consisting of angle cleats of size 25mm wide X 15mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dast fastner 12.5mm diaX 40mm long with 6mm dia. Bolts to the angle hangers being of 25X25X5mm of required length, and other end of angle hanger being fixed with nuts and bolts to 6.1 channels 45mm X 15mm X 0.9mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm

with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to 6.1 channel with connecting clips made out of 2.64mm dia X 230mm long 6.1 mm wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive – all screws @ 230 mm interval including joining and fixing to a flush finish.

The wooden ceiling will be finished with the approved 4mm veneer finished with two coats of sealer and two coats of melamine polish as per directions and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channel suitably fixed finishing of all joints neatly to proper line & level including providing of additional framework for electrical fixtures, including giving trap doors where ever required. Diffusers, cutouts for fire sprinklers etc. as per the specifications approved by architects including necessary scaffolding supports, suspendors etc. all complete as per drawing and specification and direction of the Architect/PM. sqm 51.74 4574.00 Rupees Four Thousand Five Hundred SeventyFour Only 236658.76

121 M/R PLY WALL PANELING FINISH WITH VENEER FINISH : Providing & fixing 12mm thick IS 710 ply fixed on frame work. The framework shall be fixed as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c horizontally. The frame work shall be made from Aluminium section make JINDAL/HINDALCO conforming to IS specification In paneling, (intermediate, perimeter ) & (at vertical or horizontal joint of ply & at turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated with anti-termite treatment & hidden.

The framework shall be covered with approved make plywood(IS 710- 12 mm ply),adhesive ,tape, headless nails etc ,finished with Veneer ( veneer base 4 mm thick Gurjan ply) with semiglossy PU polish & in pattern as shown in the drawing. Rate shall be inclusiveg grooves etc complete as per drawing or as directed by EIC/ Architect.

The rate shall be in Sq.mt of actual paneling work for all floors, at all heights, all shapes .Rate shall inclusive of all material ,labor scaffolding, tools, tackles, for all heights and for all levels, Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights /air-conditioners ,grills, diffusers etc & providing additional sections for strengthening around the openings/cutouts, making grooves between wall & board or as per drawing /instruction of EIC. and no extra payment shall be considered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the paneling including openable shutter wherever required area and finish with the same material. Rate shall be inclusive of all item inclusive part of paneling Only the clear elevation area shall be measured and paid. sqm 13.23 6680 Rupees Six Thousand Six Hundred Eighty Only 88376.40

122 MR Provding and fixing PVC Soil ,Waste & vent pipes all complete

110 mm dia metre 24.00 222.00 Rupees two Hundred twenty two Only 5328.00

40 mm dia metre 12.00 25.00 Rupees Twenty five Only 300.00

123 MR Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 mm vent cowel Each 1.00 50.00 Rupees fifty Only 50.00

110 mm plain bend Each 5.00 150.00 Rupees one Hundred fiftey Only 750.00

110 mm door bend Each 4.00 205.00 Rupees Two Hundred five Only 820.00

110 mm dia X 45 Bend Each 4.00 150.00 Rupees one Hundred fifty Only 600.00

110 X 110 mm dia plain - y Each 2.00 234.00 Rupees two Hundred thirty four Only 468.00

110 mm pipe clip Each 4.00 27.00 Rupees twenty seven Only 108.00

110 X110 mm dia p-trap Each 4.00 320.00 Rupees three Hundred Twenty Only 1280.00

40 mm elbow Each 8.00 24.00 Rupees twenty Four Only 192.00

40 mm plain tee Each 4.00 31.00 Rupees Thirty one Only 124.00

124 MR Establishment of -2HP of submersible pump set of approved brand and make, all complete each 1 41117.00 Rupees FourtyOne Thousand One Hundred Seventeen Only 41117.00

125 MR Supplying and fixing recess mounted 3X20 watt COB based multiple zoom light make with all accessories, directly on false ceiling including connection with 1.5 sq. mm FR PVC insulated copper conductor cable and earthing the body etc. as required. (Track light) Each 11.00 5800.00 Rupees five Thousand eight Hundred Only 63800.00

126 MR Supplying and fixing Chandelier with all accessories, directly on false ceiling including connection with 1.5 sq. mm FR PVC insulated copper conductor cable and earthing the body etc. as required. Each 1.00 27390.00 Rupees TwentySeven Thousand Three Hundred Ninety Only 27390.00

127 Durian RADIANCE/3 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 3 Seater Sofa - Size (W)1920mm X (D)910mm X (H)920mm Crafted for modern living, this compact 3-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. With overall dimensions of 1920 mm (W) × 910 mm (D) × 920 mm (H) and a seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. Each 2.00 156400.00 Rupees One Lakh fifty six Thousand four Hundred Only 312800.00

128 Durian HOPPER/A/CT or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Wooden Center Table - Center Table Size (L)1130mm X (W)630mm X (H)410mm. The centre table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. Each 1.00 31800.00 Rupees Thirty one Thousand eight Hundred Only 31800.00

129 Durian HOPPER/A/ST or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Wooden Side Table - Side Table (L)680mm X (W)530mm X (H)460mm The Side table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. Each 2.00 25000.00 Rupees Twenty Five Thousand Only 50000.00

130 Durian RUSSET/3 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 3 Seater Sofa - 3 Seater Sofa Size (W) 2060mm X (D) 950mm X (H) 930mm. Seating Height 430mm, Seat Depth 550mm, Seat Width 1610mm, Back Height 540mm. Material & Subtype Premium Leatherette. Frame Material Solid Wood Upholstery Material Premium Leatherette. Filling Material Foam. Seat Material Premium Leatherette. Finish Matte. Colour & Colour Family Brown - Cinnamon. Each 1.00 111800.00 Rupees One Lakh Eleven Thousand Eight Hundred Only 111800.00

131 Durian RUSSET/2 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 2 Seater Sofa - 2 Seater Sofa Size (W) 1540mm X (D) 950mm X (H) 930mm. Seating Height 430mm. Seat Depth 550mm. Seat Width 1080mm. Back Height 540mm. Material & Subtype Premium Leatherette. Frame Material Solid Wood Upholstery Material Premium Leatherette. Filling Material Foam. Seat Material Premium Leatherette. Finish Matte. Colour & Colour Family Brown - Cinnamon. Each 2.00 88600.00 Rupees Eighty eight Thousand Six Hundred Only 177200.00

132 Durian HOPPER/A/CT or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Wooden Center Table - Center Table Size (L)1130mm X (W)630mm X (H)410mm. The centre table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. Each 2.00 31800.00 Rupees Thirty One Thousand Eight Hundred Only 63600.00

133 Durian HOPPER/A/ST or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Wooden Side Table - Side Table (L)680mm X (W)530mm X (H)460mm The Side table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. Each 3.00 25000.00 Rupees Twenty Five Thousand Only 75000.00

134 Durian HALX/371082/A or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase\ Visitor Chair - Chair Size (W)590mm X (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat. This is then encased in deep. Each 2.00 24800.00 Rupees Twenty Four Thousand Eight Hundred Only 49600.00

135 Durian BERRY/55001/A/3 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 3 Seater Sofa - 3 Seater Sofa SIZE : 1905MM L X890MM DX 870MM H AS PER IMAGE. MATERIAL : PREMIUM LEATHERETTE / STYLE : CONTEMPORARY , COLOUR : BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER / FINISH : MATTE. SUPPLYING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1905MM L X890MM DX 870MM H PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING, CONSTRUCTION INCLUDES MOISTURE CONTENT SHALL BE LESS THAN 10-12%. THICKNESS OF PLYWOOD USED MM SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL COMMON AND MOISTURE PROOF PLYWOOD TENTATIVE. UNDERSTRUCTURE FRAME IS 18 MM

THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. STRUCTURE COVERED WITH P. U. FOAM FIXED WITH ADHESIVE GLUE ,FRAME PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM, CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. STACK FOAM STRUCTURE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR,COMPLEMENTED BY STYLISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. SEAT : 510 MM D X 445MM H , ARMS HEIGHT @ 620MM / BACK HEIGHT @ 460MM . Each 1.00 68800.00 Rupees Eighty Eight Thousand Eight Hundred Only 68800.00

136 Durian BERRY/55001/A/1 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 1 Seater Sofa- 1 Seater Sofa SIZE : (W)960MM X (D)890MM X (H)870MM. MATERIAL : PREMIUM LEATHERETTE / STYLE : CONTEMPORARY COLOUR : BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER / FINISH : MATTE. SUPPLYING ONE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 960MM L X890MM DX 870MM H PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING, CONSTRUCTION INCLUDES MOISTURE CONTENT SHALL BE LESS THAN 10-12%. THICKNESS OF PLYWOOD USED MM SHALL BE 12 MM GRADE IS 303 INDIAN

STANDARD FOR COMMERCIAL COMMON AND MOISTURE PROOF PLYWOOD TENTATIVE. UNDERSTRUCTURE FRAME IS 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. STRUCTURE COVERED WITH P. U. FOAM FIXED WITH ADHESIVE GLUE ,FRAME PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM, CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. STACK FOAM STRUCTURE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR,COMPLEMENTED BY STYLISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. SEAT : 510 MM D X 445MM H , ARMS HEIGHT @ 620MM / BACK HEIGHT @ 460MM . Each 2.00 38400.00 Rupees Thirty Eight Thousand Four Hundred Only 76800.00

137 Durian MILBURN/CT or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Center Table - Center Table Size (W) 1200mm X (D) 600mm X (H) 455mm. Material & Subtype Engineered Wood - MDF. Table Top Material Engineered Wood. Leg Material Engineered Wood. Finish Matte. Colour & Colour Family Brown - Walnut. Dimension (W) 1200mm X (D) 600mm X (H) 455mm Table Top Thickness 20mm. Each 1.00 20000.00 Rupees Twenty Thousand Only 20000.00

138 Durian CLINT/A or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Office Table with Side Unit Return - Table Top Size (L)2200mm X (D)900mm X (H)755mm and with Side Unit Table Size (2200x1800x750)mm. The Table made of PLPB with matt finish. Made with a combination of engineered wood, this gorgeous desk has contrasting panels in black for a contemporary look. Coupled with a runner and storage for your files and cabinets, the Clint is a desk meant for the discerning tycoon. With a warm walnut finish, the dual tone finish of the desk adds to its overall style and finish. With an option of regular drawers and shuttered glass storage units you can take a pick of which unit suits you the best. Each 1.00 148600.00 Rupees One Lakh Forty Eight Thousand Six Hundred Only 148600.00

139 Durian RICH/37820/HB or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase High Back Revolving Chair- Chair Size (W)660mm X (D)500mm X (H)1265mm. Made From High-Density Foam, The Sink-In Cushions And The Cradling Backrest Provides Contouring Comfort For All-Day Seating. The Soft To Touch Premium Leatherette Upholstery Add Elegance To Its Look While Also Making It Stain & Fade Resistant. Features Such As Synchro Multi-Locking Mechanism, Pneumatic Height Adjustment, Tilt Tension Control, Etc, Let You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Thick Padded Headrest And Armrest Further Let You Sit In Absolute Comfort. A Strong Chrome Base Supports The Structure While The 360 Swivel And 55Mm Castors. Each 1.00 31400.00 Rupees Thirty One Thousand Four Hundred Only 31400.00

140 Durian MMPL/70011/CN or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Visitor Chair - Chair Size (W)590mm X (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat. This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. Each 3.00 14000.00 Rupees Fourteen Thousand Only 42000.00

141 Durian CLINT/C or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Back Unit- Back unit Size (1600x450x800)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. Each 1.00 55600.00 Rupees Fifty Five Thousand Six Hundred Only 55600.00

For Souvenir Shop

142 Durian CASH COUNTER (1200X600X1200) or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Cash Counter- Cash Counter Size (1200x600x1200)mm. ·67mm thk Sliding Tile Based Partition. Single Metal raceway cover at skirting level in Partition. Glass Partition in above the tabletop. Table top made of 25mm thk Prelamin particle board with pvc edges. Pedestal of 350Lx 450Dx725 HT (2 drawer + 1filling). PVC Keyboard Tray . Metal CPU Trolley. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Each 1.00 59600.00 Rupees Fifty Nine Thousand Six Hundred Only 59600.00

143 Durian MMPL/70006/MB or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Medium Back Chair - MEDIUM BACK 360ø DEGREE REVOLVING CHAIR, * ALL OVER SIZE IS : 660MM LX 460MM DX 1090MM H , *THE CHAIR MADE OF FULL FABRIC IN BLACK/RED COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PP FIXED T SHAPE ARMS . * USE OF PLY : 12 MM THICK HOT PRESSED BWR PLYWOOD IS GRADE - 303WITH PVC ABS SEAT & BACK COVER . * SEAT: 40 ñ 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 ñ3 KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ñ 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 ñ3 KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : PUSH BACK MECHANISM . * ONLY SEAT SIZE IS 460MM LX 445MM DX 465-565MM H & THE BACK SIZE IS 430MM LX 500MM H * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH SMOOTH CASTORS. Each 1.00 14460.00 Rupees Fourteen Thousand Four Hundred Sixty Only 14460.00

144 MR D/S/I of the Following Cabinets / Showcases, all complete with full finishing, all as per instructions of E/I, to form a fully secure and sturdy system, along with any extra members for safety as required, all complete.

Elevation are to be measured, all complete, as per schematic drawing attached, with premium quality hinges / hardware - EBCO / HETTICH. (Elevation Area) Sqm 27.59 24500.00 Rupees TwentyFour Thousand Five Hundred Only 675955.00

145 Approval BCD SPLIT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to 50 deg. C & heating within O deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost.

1.1 1.5 TR ,5 Star Each 6 58500.00 Rupees FiftyEight Thousand Five Hundred Only 351000.00

1.2 2.0 TR ,5 Star Each 1 74500.00 Rupees SeventyFour Thousand Five Hundred Only 74500.00

Lakhisarai SH 18

29km 45km 30km 13.00km

21.00km Jamui Banka

Work Site SH 04 Daniyawan-Hilsa-Gaya Road

2 Km 55.00km 86.00km Koilwer

75.00km Patna Bypass 107

Fathua 2km Depot

S.No Material Source Pucca Gravelled Kutcha Total

1 Rail head Buxar 47km 0av km site 0 47km

2 Metal, chips, boulder Pakur via Manihari 470 0av km site 22 492km

3 Bitumen Fatuha 132km 0av km site 0 132km

4 Emulsion Patna 94km 0av km site 0 94km

5 Coarse sand Koilwer 56km 0av km site 1 57km

J.E. P.E. S.P.E.

B.R.P.N.N.L B.R.P.N.N.L B.R.P.N.N.L

Works Division, Ara Works Division, Ara Works Division, Ara

Dy. Chief Engineer

ANALYSIS OF RATE FOR CARRIAGE OF MATERIALS

1.Stone Chips below 50mm from Koderma

Rate Rs 3587.10 Per cum

STONE METAL BELOW 50mm

A Koderma range to Koderma rail head

Lead 4 km graveled 8 km Pucca

B Loading on wagon at rail head by manual means @ 3.5labour / 2.832m3 195.10

C Carriage for 175 km by railway = 185.10

D Fatuha station to work site

Lead 0 km Kutcha 15 km Pucca 0 km gravelled

3587.10 < 1450.36 Hence 1450.36 is admissable

Lead - 7km with 1km Kutcha

Rate Rs 947.00 Per %0 No

3.Coarse Sand from koilwar

Rate Rs 2806.30 Per cum

Rate Rs 366.62 Per cum

5. Cement and steel from patna

Rate Rs 602.00 Per mt

6.Stone metal/boulder from Pakur

Rate Rs 19859.10 Per cum

Boulder from Pakur

A Pakur range pakur to Pakur rail head

Lead 4 km graveled 8 km Pucca

B Loading on wagon at rail head by manual means @ 3.5labour / 2.832m3 195.10

C Carriage for 372 km by railway = 425.30

D Fatuha station to work site

Lead 0 km Kutcha 15 km Pucca 0 km Gravelled

19859.10 > 2782.15 Hence 2782.15 is admissable

7.Bitumen from Fatuha

For Gross Weight add 6% = 1.06 X 6402

Rate Rs 2095.94 Per mt

8.Emulsion from Patna

For Gross Weight add 6% = 1.06 X 6402

Rate Rs 6786.12 Per mt

A Loading on wagon at rail head by manual means @ 3.5labour / 2.832m3 402.00

B Carriage for 498.00km by railway = = 715.00

Add 7% for busy season charge = 50.05

Add 5.75% for development charge = 41.11

Add OTC + DTC =

C station to work site =

Lead 0 km Kutcha 470 km Pucca 22 km Gravelled

Hence 6786.12 is admissable

Lead - 2KM including 1km unsurfaced

Rate Rs 373.77 Per m3

10.RCC Pipe-1200mm Dia

Rate Rs 2200.43 Per m

10.RCC Pipe-1000mm Dia

Rate Rs 2115.10 Per m

Abstract for the Construction of Pathway near Bari Patan Devi Temple, Patna

S No. ITEM AMOUNT

1 CIVIL COST ₹ 3,346,446.00

2 CARRIAGE #REF! #REF!

Detailed Estimate fot the Construction of Pathway near Bari Patan Devi Tample, Patna

Sn. Item No. Item Of Work Description Length L/Dia Breadth B Height H/ Depth No. Quantity Unit Rate (Rs.) Amount (Rs.)

1 11.29.1 40 mm thick rough chisel dressed stone flooring over 20 mm (average) thick base including pointing with C.M 1:2 (1 cement :2 stone dust) with an admixture of pigment to match the shade of the stone with base 1:1:1 (1 lime : 1surkhi : coarse sand or 1:5 (1 cement : 5 coarse sand) Red Sand Stone 2400 1 2400.00 Sqm.

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 2400 0.75 0.1 180.00 Cum.

3 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. 2400 1 2400.00 Sqm.

MATERIAL STATEMENT SAND (cum) CEMENT (MT) BRICK (nos.) STONE CHIPS (cum) LOCAL SAND (cum) #REF!

Stone Flooring 69.60 21.60 2400.00 sqm

Brick Soling 51172.38 31.99 2400.00 sqm

local sand 180.00 180.00 cum.

Carriage Calculation Chart for the Construction of Pathway near Bari Patan Devi Temple, Patna

S No. Type of materials Qty Unit Rate Amount

1 Cement 21.60 MT #REF! #REF!

2 Sand 125.86 cum #REF! #REF!

3 Local Sand 211.99 cum. #REF! #REF!

4 Stone Chips 112.61 cum #REF! #REF!

5 Brick 51.17 Thous. #REF! #REF!

Grand Total #REF!

Grand Total = #REF!

Abstract for the Construction of 4.5m Wide Gate near Bari Patan Devi Temple, Patna

S No. ITEM AMOUNT

1 CIVIL COST ₹ 1,418,591.90

2 CARRIAGE #REF! #REF!

Detailed Estimate for the Construction of 4.5m Wide Gate near Bari Patan Devi Tample, Patna

Sn. Item No. Item Of Work Description Length L/Dia Breadth B Height H/ Depth No. Quantity Unit Rate (Rs.) Amount (Rs.)

Foundation Work

1 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. EXCAVATION

2 20.2.2 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).400 mm dia pile

Sand Filling(At Foundation)

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. SAND FILLING BELOW FOUNDATION

SAND FILLING BELOW PLINTH

Floor 15 0.5 1 7.50 cum.

Flat Brick Soling (At Foundation) FLAT BRICK SOLING BELOW FOUNDATION

4 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

FLAT BRICK SOLING BELOW PLINTH

Floor 15 1 15.00 Sqm.

PCC (At Foundation)

5 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) P.C.C BELOW FOUNDATION

P.C.C BELOW PLINTH

Floor 15 0.075 1 1.13 cum.

R.C.C WORK BELOW PLINTH LEVEL

6 5.33A.1+5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete. All work upto plinth level Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C.

PEDESTAL 1.80 1.40 0.30 2 1.51 Cum.

RCC (COLUMN BELOW PLINTH)

RCC (NGL & PLINTH BEAM)

TOTAL 8.32 Cum.

R.C.C WORK ABOVE PLINTH LEVEL

7 5.33A+5.33A.2.2+5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete.All works above plinth level upto floor V level.Beams, planth beams, girders, bressumers, cantilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. Add or deduct for providing richer or leaner mixes respectively at all floor levels.Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. RCC (ROOF BEAM)

TOTAL= 18.12 Cum.

RCC in Column / Stiffner (Above Plinth Level)

8 5.33A+5.33A.2.1+5.33B.1 Providing and laying in position machine batched, machine mixed andmachine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Walls columns, pillars, posts cind struts Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. RCC (COLUMN)

UPTO THE PARAPET C1 0.45 0.35 6 1 0.95 Cum.

9 13.13.4 20mm plaster 1:6 (1 cement : 6 coarse sand) EXTERNAL 80 1 160 Sqm.

10 5.3 Add for plaster drip course/groove in plastered surface or moulding to R.C.C. projections. 15.00 1 15.00 m. ₹ 34.20 ₹ 513.00

11 5.14 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc. including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

12 13.39.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In two coats 40.00 1 40.00 Sqm.

CENTERING & SHUTTERING (FOUNDATION)

10 5.9.1 Centring and shuttering including strutting, proping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete PC1 2.30 1.50 0.8 1 6.08 Sqm.

PEDESTAL 1.80 1.40 0.3 2 3.84 Sqm.

CENTERING & SHUTTERING (COLUMNS)

11 5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. BELOW PLINTH LEVEL

ABOVE PLINTH LEVEL

UPTO THE PARAPET C1 0.45 0.35 6 1 9.60 Sqm.

CENTERING & SHUTTERING (BEAMS)

12 5.9.5 Centring and shuttering including strutting, proping etc. and removal of form for Lintels, beams, plinth bams, griders, bressumers and cantilevers. NGL BEAM 4.5 0.45 0.45 1 4.455 Sqm.

13 7.37.1.A Stone work ( machine cut edges veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Dressing of sand stone in veneer work 22 9.5 1 209.00 Sqm. ₹ 2,563.80 ₹ 535,834.20

14 7.40.1 Providing and fixing dry cladding upto 10 metre heights with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and / or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-Charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.) RED SAND STONE GATE 22 1.5 1 33.00 Sqm.

15 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 210.00 Sqm. ₹ 105.40 ₹ 22,134.00

16 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 210.00 Sqm. ₹ 137.00 ₹ 28,770.00

17 5.22 Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding all complete.

MATERIAL STATEMENT SAND (cum) CEMENT (MT) BRICK (nos.) STONE CHIPS (cum) LOCAL SAND (cum) 3192.58884

Sand Filling 16.38 16.38 cum

Brick Soling 519.40 0.32 24.36 sqm

Carriage Calculation Chart for the Construction of 4.5m Wide Gate near Bari Patan Devi Temple, Patna

S No. Type of materials Qty Unit Rate Amount

1 Cement 23.55 MT #REF! #REF!

2 Sand 41.87 cum #REF! #REF!

3 Local Sand 16.70 cum #REF! #REF!

4 Stone Chips 68.60 cum #REF! #REF!

5 Brick 0.52 Thous. #REF! #REF!

6 Steel 3.19 MT #REF! #REF!

Grand Total #REF!

Grand Total = #REF!

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LIMITED

FINANCIAL BID FORM

TO BE FILLED IN BY BIDDER

Name of Work CONSTRUCTION OF TOURIST INFORMATION CENTRE AT TAKHT HARIMANDIR SAHIB JI PATNA CITY UNDER PATNA DISTRICT.

Estimated Cost 6499146.00

a. If a bidder is willing to execute the works, say, at the estimated cost, he/ she must fill in "0" in front of 'in figures' and "ZERO" in front of 'in words' and "AT THE ESTIMATED COST" in front of 'Above or below'.

b. If a bidder is willing to execute the works, say, at 2.45 percent below the estimated cost, he/she must fill in "2.45" in front of 'in figures' and "TWO POINT FOUR FIVE" in front of 'in words' and "BELOW" in front of 'Above or below'.

Sl. No. What to fill in the colour cells Fill in the four colored cells below

1 Name of Contractor

2 Percent above or below the estimated Cost in figures

4 Above or Below

BILL OF QUANTITY FOR DEVELOPMENT OF TIC AT TAKHT HARMANDIR SAHIBJI, PATNA CITY

BASED ON S.O.R. B.C.D.GOVT. OF BIHAR EFFECTIVE FROM 01/01/2022/MR

SL.NO DESCRIPTION UNIT QTY. RATE AMOUNT

(IN DIGIT) (IN WORD)

SUBHEAD-A(SOR ITEMS)

1 15.7 Demolishing brick work including stacking of serviceable materialand disposal of unserviceable material within 50 meters lead:

15.7.4 In cement mortar cum 5.33 823.70 Rupees Eight Hundred TwentyThree Paise Seventy Only 4390.32

2 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.. sqm 170.11 106.70 Rupees One Hundred Six Paise Seventy Only 18150.74

3 15.57 Dismantling alumiuium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 m lead as directed by Engineer-in-charge. sqm 48.81 23.70 Rupees TwentyThree Paise Seventy Only 1156.80

4 15.4 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: cum 1.12 1411.20 Rupees One Thousand Four Hundred Eleven Paise Twenty Only 1580.54

5 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead.

15.13.1 Of area 3 sqm and below each 7.00 58.90 Rupees FiftyEight Paise Ninety Only 412.30

6 SOR 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed

2.6.1 All kinds of soil Cum 34.01 314.90 Rupees Three Hundred Fourteen Paise Ninety Only 10709.75

7 SOR 2.8 Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms,lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m

SOR 2.8.1 All kind of soil Cum 59.07 360.70 Rupees Three Hundred Sixty Paise Seventy Only 21306.55

8 SOR 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead Cum 34.01 123.90 Rupees One Hundred TwentyThree Paise Ninety Only 4213.84

9 SOR 2.27 Extra for every additional lift of 1.5 m or part thereof in :

2.27.1 All kinds of soil Cum 6.52 49.40 Rupees FourtyNine Paise Fourty Only 322.09

10 SOR 2.28 Supplying and filling in plinth with sand under floors including watering,ramming consolidating and dressing complete Cum 3.57 287.30 Rupees Two Hundred EightySeven Paise Thirty Only 1025.66

11 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1.3 1:2:4(1 Cement :2 coarsesand:4 graded stone aggregate 20mm nominal size) cum 156.66 3998.10 Rupees Three Thousand Nine Hundred NinetyEight Paise Ten Only 626342.35

12 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in :

6.18A.4+ 6.19A Cement mortar 1:4 (1 cement: 4 coarse send) sqm 22.13 689.00 Rupees Six Hundred EightyNine Only 15247.57

13 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete

11.41.2 Size of Tile 60x60 cm sqm 153.39 1638.80 Rupees One Thousand Six Hundred ThirtyEight Paise Eighty Only 251375.53

14 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

11.46.2 Size of Tile 600 x 600 mm. sqm 55.69 1191.80 Rupees One Thousand One Hundred NinetyOne Paise Eighty Only 66371.34

15 SOR' 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per specification and direction of E/I. Per M2 31.73 283.30 Rupees Two Hundred EightyThree Paise Thirty Only 8989.11

16 SOR 6.1A Brick work with F.P.S bricks of class designation 75 in foundation and plinth in:

SOR 6.1.14A Cement morter 1:6(1 cement : 6 corse sand) Cum 8.66 4819.90 Rupees Four Thousand Eight Hundred Nineteen Paise Ninety Only 41740.33

17 SOR 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in :

6.18.4A Cement mortar 1:4 ( 1 cement: 4 coarse sand) Sqm 3.36 599.30 Rupees Five Hundred NinetyNine Paise Thirty Only 2013.65

18 SOR 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall. Sqm. 45.86 229.30 Rupees Two Hundred TwentyNine Paise Thirty Only 10515.70

19 SOR 5.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.

5.2.3 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Cum 0.26 5214.10 Rupees Five Thousand Two Hundred Fourteen Paise Ten Only 1355.67

20 SOR 5.3. Reinforced cement concrete work in beams,suspended floors roofs,having slope upto 15, landing,balconies, shelves, chajjas, lintal, bends,plain window sills stair case,and spiral staircases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement with 1:2:4 Cum 13.17 5335.90 Rupees Five Thousand Three Hundred ThirtyFive Paise Ninety Only 70273.80

21 SOR 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

5.9.1 Foundations, footings, bases of columns etc. for mass concrete. Sqm 19.08 211.60 Rupees Two Hundred Eleven Paise Sixty Only 4037.33

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 4.95 404.70 Rupees Four Hundred Four Paise Seventy Only 2003.27

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 72.68 494.40 Rupees Four Hundred NinetyFour Paise Fourty Only 35932.99

5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sqm 18.58 437.50 Rupees Four Hundred ThirtySeven Paise Fifty Only 8128.75

22 SOR 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

SOR 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. Kg 890.00 94.50 Rupees NinetyFour Paise Fifty Only 84105.00

SOR 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. Kg 519.00 92.60 Rupees NinetyTwo Paise Sixty Only 48059.40

5.22.7c Thermo-Mechanically Treated bars TMTC-500-12mm dia. Kg 184.00 90.80 Rupees Ninety Paise Eighty Only 16707.20

23 13.80.A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 284.42 105.40 Rupees One Hundred Five Paise Fourty Only 29977.87

24 13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary pain+ of approved brand and manufacture sqm 284.42 116.50 Rupees One Hundred Sixteen Paise Fifty Only 33134.93

25 12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl ,plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutoutsmade with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I Sqm 95.30 828.20 Rupees Eight Hundred TwentyEight Paise Twenty Only 78927.46

26 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

8.2.2.1 Area of slab upto 0.50 sqm Sqm 2.41 4242.90 Rupees Four Thousand Two Hundred FourtyTwo Paise Ninety Only 10225.39

27 26A.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: Sqm 51.95 3111.40 Rupees Three Thousand One Hundred Eleven Paise Fourty Only 161637.23

28 26.42 Providing and fixing of external wall system on Light gauge steel frame work with outer face cement boards as per standard sizes fixed with self- drilling/ taping rews/ fasteners @ 60cm c/c of approved make.A groove of 2mm to3mm shall be maintained and grooves shall be sealed with silicon based sealant.The board shall befixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. Internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self- drilling/ taping screws/ fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cos of frame work to be paid for separately)

26.42.1 Outer face: Outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, Type A, as per IS:14862:2000 (high pressure steam cured) Inner Face :- 12.5 mm thick gypsum plaster board conforming to IS 2095:2011 fixed on 8 mm thick fibre cement board confirming to S:14862:2000 of type B (High pressure steam cured) Sqm 62.29 3088.90 Rupees Three Thousand EightyEight Paise Ninety Only 192407.58

29 Add Carriage of Materials with Loading & Unloading

Bricks 100A(local lead 1K+7P) ‰ No. 4662.00 1140.59 Rupees One Thousand One Hundred Fourty Paise FiftyNine Only 5317.43

Coarse sand from Koilwar cum 9.97 1636.78 Rupees One Thousand Six Hundred ThirtySix Paise SeventyEight Only 16318.68

Stone Chips from Koderma cum 14.27 1978.21 Rupees One Thousand Nine Hundred SeventyEight Paise TwentyOne Only 28229.06

Local Sand ( Lead local 1K+2P) cum 4.04 310.47 Rupees Three Hundred Ten Paise FourtySeven Only 1254.30

30 Diffrences cost of materials 0.00

Bricks 100A ‰ No. 4662.00 1606.89 Rupees One Thousand Six Hundred Six Paise EightyNine Only 7491.30

Cement Tone 9.51 265.41 Rupees Two Hundred SixtyFive Paise FourtyOne Only 2524.01

31 SOR 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lif, 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings & C.I brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

17.3.1 W.C pan with ISI marked white solid plastic seat and lid Each 2.00 5504.30 Rupees Five Thousand Five Hundred Four Paise Thirty Only 11008.60

32 SOR 17.7 Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

17.7.1 White Vitreous China Wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps. Each 4.00 2764.40 Rupees Two Thousand Seven Hundred SixtyFour Paise Fourty Only 11057.60

33 SOR 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

17.70.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260 gms. Each 4.00 335.20 Rupees Three Hundred ThirtyFive Paise Twenty Only 1340.80

34 SOR 17.34 Provding and fixing Toilet Paper.holder

17.34.2 Vitreous china Each 2.00 332.90 Rupees Three Hundred ThirtyTwo Paise Ninety Only 665.80

35 SOR 17.71 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. Each 4.00 146.30 Rupees One Hundred FourtySix Paise Thirty Only 585.20

36 SOR 17.72 Providing and fixing PTMT towel ring trapezodial shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Each 2.00 204.70 Rupees Two Hundred Four Paise Seventy Only 409.40

37 SOR 17.31 Provding and fixing 600X450mm beveled edge mirror of superior glass complete with 6mm thick hard board ground fixed to wooden cieats with CP brass screws & washers complete. Each 4.00 1068.50 Rupees One Thousand SixtyEight Paise Fifty Only 4274.00

38 SOR 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20 mm Nominal outer dia pipes Metre 3.00 233.90 Rupees Two Hundred ThirtyThree Paise Ninety Only 701.70

18.7.3 25 mm Nominal outer dia pipes Metre 22.00 317.30 Rupees Three Hundred Seventeen Paise Thirty Only 6980.60

18.7.4 32 mm Nominal outer dia pipes Metre 16.00 395.20 Rupees Three Hundred NinetyFive Paise Twenty Only 6323.20

39 SOR 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

18.8.1 15 mm Nominal outer dia pipes Metre 2.00 278.20 Rupees Two Hundred SeventyEight Paise Twenty Only 556.40

18.8.2 20 mm Nominal outer dia pipes Metre 6.00 350.80 Rupees Three Hundred Fifty Paise Eighty Only 2104.80

18.8.3 25 mm Nominal outer dia pipes Metre 4.00 463.10 Rupees Four Hundred SixtyThree Paise Ten Only 1852.40

40 SOR 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.4 32 mm nominal outer dia pipes Metre 20.00 359.10 Rupees Three Hundred FiftyNine Paise Ten Only 7182.00

41 SOR. 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality.

18.17.1 25 mm Nominal bore Each. 2.00 532.30 Rupees Five Hundred ThirtyTwo Paise Thirty Only 1064.60

18.17.2 32 mm Nominal bore Each. 3.00 589.90 Rupees Five Hundred EightyNine Paise Ninety Only 1769.70

42 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end).

18.19.2 32mm nominal bore

18.19.2.2 Vertical Each. 1.00 777.90 Rupees Seven Hundred SeventySeven Paise Ninety Only 777.90

43 SOR 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions.

18.21.2 45 cm length

18.21.2.1 15 mm Nominal bore Each. 6.00 85.20 Rupees EightyFive Paise Twenty Only 511.20

44 SOR 18.46 Providing and fixing G.I. union in G.I.pipe including cutting and threading the pipe and making long screws etc.

18.46.3 25 mm dia. Nominal bore Each. 2.00 265.90 Rupees Two Hundred SixtyFive Paise Ninety Only 531.80

18.46.4 32 mm dia. Nominal bore Each. 3.00 306.00 Rupees Three Hundred Six Only 918.00

45 SOR 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS :8931.

18.49.1 15 mm Nominal bore Each 2.00 434.20 Rupees Four Hundred ThirtyFour Paise Twenty Only 868.40

46 SOR 18.53 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

18.53.1 15 mm Nominal bore Each 6.00 500.40 Rupees Five Hundred Paise Fourty Only 3002.40

47 SOR 18.58 Providing and fixing PTMT grating of approved quality and colour.

18.58.2 Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating Each 4.00 169.70 Rupees One Hundred SixtyNine Paise Seventy Only 678.80

48 SOR 18.33 Constructing masonry Chamber 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:

18.33.1 With common burnt clay F.P.S (non modular) bricks of class designation 100 A Each 1.00 7210.60 Rupees Seven Thousand Two Hundred Ten Paise Sixty Only 7210.60

49 18.48 Providing and placing on terrace polythethylene water storage tank ISI. :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (1000x1=1000) per litre 1000.00 9.70 Rupees Nine Paise Seventy Only 9700.00

50 SOR 2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m:

2.10.1 All kinds of soil

2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Metre 61.40 391.70 Rupees Three Hundred NinetyOne Paise Seventy Only 24050.38

51 SOR 19.01 Providing, laying and jointing glazed stoneware pipes class SP-1 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete.

19.1.2 150mm diameter Metre 2.40 464.30 Rupees Four Hundred SixtyFour Paise Thirty Only 1114.32

52 SOR 19.02 Providing and laying cement concrete 1:5:10( 1 cement: 5 coarse sand:10 graded stone aggregate 40mm nominal size) all-round S.W pipes including bed concrete as per standard design.

19.2.2 150mm diameter S.W pipe Metre 2.40 494.40 Rupees Four Hundred NinetyFour Paise Fourty Only 1186.56

53 SOR 19.4 Providing and fixing square mouth SW gully trap grade A complete with CI grating brick masonry chamber with water tight CI cover with frame of 300X300mm size(inside) the wt. of cover to be not less than4.50kg. And frame to not less than 2.70 kg. as/standard design

19.4.3 180x150mmsize p type

19.4.3.1 With F.P.S. bricks designation 7.5 Each 2.00 1994.10 Rupees One Thousand Nine Hundred NinetyFour Paise Ten Only 3988.20

54 SOR 19.6 Providing and laying non -pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc.

19.6.2 150 mm dia R.C.C. pipe Metr. 59.00 410.70 Rupees Four Hundred Ten Paise Seventy Only 24231.30

55 SOR 19.18 Supplying and fixing C.I cover without frame for manholes:

SOR 19.18.2 500 mm diameter C.I cover (medium duty) the weiht of he cover to be not less than 58 kg. Each 6.00 3164.60 Rupees Three Thousand One Hundred SixtyFour Paise Sixty Only 18987.60

56 SOR 19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design

19.15.1 With 20x20mm square bar Each 20.00 310.90 Rupees Three Hundred Ten Paise Ninety Only 6218.00

57 SOR 19.30 Constructing brick masonry chamber for underground C.I inspection chamber and bends with 75 class designation bricks in cement mortr 1:4( 1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab ith 1:2:4 mix ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) foundtion concrete 1:5:10( 1 cement: 5 fine sand:10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

19.30.1 Inside dimensions 455x610mm and 45cm deep for single pipe line:

19.30.1.1 With F.P.S bricks Each 9.00 4266.80 Rupees Four Thousand Two Hundred SixtySix Paise Eighty Only 38401.20

58 SOR 19.31 Extra for depth beyond 45cm of brick masonry chamber:

19.31.1 For 455x610mm size

19.31.1.1 With F.P.S bricks Metre 0.90 3946.20 Rupees Three Thousand Nine Hundred FourtySix Paise Twenty Only 3551.58

59 SOR 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with brick of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

19.32.1 With F.P.S. bricks Each 1.00 33603.40 Rupees ThirtyThree Thousand Six Hundred Three Paise Fourty Only 33603.40

60 SOR 24.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

24.1.1 All types of soil

24.1.1.1 300 mm dia Mtrs. 130.00 486.80 Rupees Four Hundred EightySix Paise Eighty Only 63284.00

61 SOR 24.2 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.

24.2.1 All types of soil

24.2.1.1 300 mm dia Mtrs. 30.00 567.90 Rupees Five Hundred SixtySeven Paise Ninety Only 17037.00

62 SOR 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

24.3.1 100 mm nominal size dia Mtrs. 45 546.10 Rupees Five Hundred FourtySix Paise Ten Only 24574.50

24.3.2 150 mm nominal size dia Mtrs. 67 660.10 Rupees Six Hundred Sixty Paise Ten Only 44226.70

63 SOR 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

24.4.1 100 mm nominal size dia Metre 30 573.10 Rupees Five Hundred SeventyThree Paise Ten Only 17193.00

64 SOR 24.8 Gravels packing in tubewell construction in accordance with IS 4097 including providing graval fine/medium/coarse,in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in charge. cu_m 7.08 1343.20 Rupees One Thousand Three Hundred FourtyThree Paise Twenty Only 9509.86

65 SOR 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hrs 36 916.80 Rupees Nine Hundred Sixteen Paise Eighty Only 33004.80

66 SOR 24.13 Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing/ casing pipe ,removable as per requirement,all complete for borewell of,

24.13.2 150 mm dia each 2 210.70 Rupees Two Hundred Ten Paise Seventy Only 421.40

67 SOR 24.14 Providing & fixing MS clamp of required dia to the top of housing/casing pipe of,removable as pe tubewell as per IS;2800(part-I), including necessary bolts & nuts of required size complete

24.14.2 150 mm dia each 2 1531.40 Rupees One Thousand Five Hundred ThirtyOne Paise Fourty Only 3062.80

68 SOR 24.15 Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I),

24.15.1 100mm dia each 1 228.30 Rupees Two Hundred TwentyEight Paise Thirty Only 228.30

69 SOR 12.78 Providing and fixing on wall face PVC (working pressure 4kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.78.2 110 mm diameter Metre 30.00 257.50 Rupees Two Hundred FiftySeven Paise Fifty Only 7725.00

70 SOR 12.79 Providing and fixing on wall face PVC moulded fitting / accessories for rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.79.1 Coupler

12.79.1.2 110 mm Each 6.00 120.00 Rupees One Hundred Twenty Only 720.00

12.79.2 Single pushfit Coupler:

12.79.2.2 110 mm Each 6.00 374.60 Rupees Three Hundred SeventyFour Paise Sixty Only 2247.60

12.79.5.2 110 mm bend Each 8.00 132.00 Rupees One Hundred ThirtyTwo Only 1056.00

71 SOR 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

12.80.2 110 mm Each 12.00 182.72 Rupees One Hundred EightyTwo Paise SeventyTwo Only 2192.64

72 SOR 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Each 8.00 47.90 Rupees FourtySeven Paise Ninety Only 383.20

73 SOR 24.4 Supplying,assembling,lowering and fixing in virtical position in borewell ,unplasticized PVC medium well screen (RMS) pipes with ribs , confirming to IS:12818,including required hire and labour charges,fittings and accessories etc. all complete, for all depths, as per direction of Engineer-in-charge

SOR 24.4.2 150 mm nominal dia metre 6.00 673.50 Rupees Six Hundred SeventyThree Paise Fifty Only 4041.00

74 SOR 24.5 Supplying , filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in Recharge Pit,in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3.50 1188.90 Rupees One Thousand One Hundred EightyEight Paise Ninety Only 4161.15

75 SOR 24.6 Supplying , filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the Recharge Pit,over the existing layer boulders in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3.08 1195.60 Rupees One Thousand One Hundred NinetyFive Paise Sixty Only 3682.45

76 SOR 24.7 Supplying , filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm, in the Recharge Pit, in the required thickness over gravel layer ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3.14 1195.60 Rupees One Thousand One Hundred NinetyFive Paise Sixty Only 3754.18

77 SOR 19.7 Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:

19.7.1 Inside size 90x80cm and 45cm deep including C.I cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

19.7.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 1.00 7914.70 Rupees Seven Thousand Nine Hundred Fourteen Paise Seventy Only 7914.70

78 SOR 19.8 Extra for depth for manholes

19.8.1 Size 90x80cm

19.8.1.1 With F.P.S bricks class designation 75 Metre 0.10 5660.00 Rupees Five Thousand Six Hundred Sixty Only 566.00

Add 5.36 % GST on SOR Item as per BCD 129299.68

79 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 7.00 2482.00 Rupees Two Thousand Four Hundred EightyTwo Only 17374.00

80 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required Each 7.00 358.00 Rupees Three Hundred FiftyEight Only 2506.00

91 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

8.17.1 300 mm sweep Each 2.00 2572.00 Rupees Two Thousand Five Hundred SeventyTwo Only 5144.00

82 5.3 Supplying and fixing 4'x20 watt LED batten with minimum efficacy 100lm/w in aluminoum housing and complete with integrated electronic driver etc. directly on ceiling / wall including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor single core cable etc. as required. Each 11.00 762.00 Rupees Seven Hundred SixtyTwo Only 8382.00

83 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

5.8.3 18 watt Each 29.00 1694.00 Rupees One Thousand Six Hundred NinetyFour Only 49126.00

5.8.1 9/10 watt Each 2.00 911.00 Rupees Nine Hundred Eleven Only 1822.00

87 1.34 Supplying and fixing batten / angle holder including connections etc. as required. Each 9.00 80.00 Rupees Eighty Only 720.00

85 6.1 Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required.

6.1.6 15 watt LED lamp Each 9.00 250.00 Rupees Two Hundred Fifty Only 2250.00

86 5.1 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 12.00 1275.00 Rupees One Thousand Two Hundred SeventyFive Only 15300.00

87 1.33 Supplying and fixing 2 pin 5 Amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 13.00 64.00 Rupees SixtyFour Only 832.00

88 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps moduler socket outlet & 6A modular type switch connection etc. as required. Point 24.00 414.00 Rupees Four Hundred Fourteen Only 9936.00

89 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/ 16 amps moduler socket outlet & 15/16A modular type switch connection etc. as required. Point 7.00 531.00 Rupees Five Hundred ThirtyOne Only 3717.00

90 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 3.00 683.00 Rupees Six Hundred EightyThree Only 2049.00

91 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Each 5.00 131.00 Rupees One Hundred ThirtyOne Only 655.00

1.24.7 TV antenna socket outlet Each 4.00 131.00 Rupees One Hundred ThirtyOne Only 524.00

92 1.27 Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches/ socket/TV / Telephone outlet in surface/ recess etc. as required.

1.27.1 75mmX75mmX50mm Each 9.00 234.00 Rupees Two Hundred ThirtyFour Only 2106.00

93 MP PWD 38.4 Supply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below

MP PWD 38.4.1 10 Pair Each 1.00 817.74 Rupees Eight Hundred Seventeen Paise SeventyFour Only 817.74

94 1.26 Supplying and fixing modular blanking plate on the existing modular plate & metal box excluding modular plate, etc. as required. Each 10.00 34.00 Rupees ThirtyFour Only 340.00

95 Supplying and fixing metal/ PVC box of following sizes ( nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

1.22.1 75mmX75mmX50mm deep Each 4.00 139.00 Rupees One Hundred ThirtyNine Only 556.00

1.22.6 200mmX150mmX60mm deep Each 2.00 276.00 Rupees Two Hundred SeventySix Only 552.00

96 1.3 Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch , modular plate suitable size G.I. box etc as required.

1.3.3 Group C Point 70.00 1146.00 Rupees One Thousand One Hundred FourtySix Only 80220.00

97 Wiring for group controlled (looped) light point/ fan point/ exhaust fan point / call bell point (without independent Switch etc.) with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit etc as required.

1.59.3 Group C Point 14.00 609.00 Rupees Six Hundred Nine Only 8526.00

98 1.5 Wiring for power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No.4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as required Meter 200.00 309.00 Rupees Three Hundred Nine Only 61800.00

99 1.7 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 350.00 246.00 Rupees Two Hundred FourtySix Only 86100.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 80.00 422.00 Rupees Four Hundred TwentyTwo Only 33760.00

100 Supplying & fixing of following size medium class PVC conduit along with accessories in surface/ recess including cutting of wall and making good the same in case of recessed conduit as required.

1.21.1 20 mm dia Meter 100.00 102.00 Rupees One Hundred Two Only 10200.00

1.21.2 25 mm dia Meter 80.00 120.00 Rupees One Hundred Twenty Only 9600.00

101 1.17 Supplying and drawing co-axial W cable RG-6 grade, 0.7mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed PVC conduit as required. Meter 100.00 42.00 Rupees FourtyTwo Only 4200.00

102 1.16 Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required.

1.16.2 2 Pair Meter 100.00 31.00 Rupees ThirtyOne Only 3100.00

103 MP PWD 38.3 Supply installation, testingand commissioningof 0.5mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filledwithpoly-al laminatemoisturebarrier, polythene sheathed, armoured polythene jacketed telephone cables as per DOT specifications of following sizes

MP PWD 38.3.1 10 Pair Meter 30.00 204.14 Rupees Two Hundred Four Paise Fourteen Only 6124.20

MAIN PANEL & D.B.s

104 2.9 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.8.7 12 way, Double door Each 2.00 2314.00 Rupees Two Thousand Three Hundred Fourteen Only 4628.00

105 2.32 Supplying and fixing cable end box ( Loose wire box , IP 43) suitable for following sheet steel M.C.B. Distribution board, on surface/ recess, complete with testing commissioning etc. as required

2.32.3 For 14 way, Double door SPN MCBDB Each 2.00 1064.00 Rupees One Thousand SixtyFour Only 2128.00

106 Supplying and fixing of following rating C series MCB suitable for inductive and other loads of following poles in the existing MCB DB complete witth connections ,testing and commissioning etc. as required .

2.12.1 6 Amp. To 32 Amp. SP MCB 240 Volt Each 24.00 237.00 Rupees Two Hundred ThirtySeven Only 5688.00

2.12.2 32 Amp SPN MCB 240 Volt Each 2.00 606.00 Rupees Six Hundred Six Only 1212.00

107 2.14 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 2.00 13.00 Rupees Thirteen Only 26.00

108 Providing and fixing of following rating electrical items in existing cubical panel including drilling holes in if required, making connections etc. as required .

2.12.2 32 Amp SPN MCB 240 Volt Each 2.00 606.00 Rupees Six Hundred Six Only 1212.00

109 DSR EnM 2025 40.3 Supplying Installation Testing and Commissioning of 4MP IP IR Dome Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

DSR EnM 2025 40.3 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps , Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

DSR EnM 2025 40.3 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

40.3.1 4MP @ 25/30fps@1440P (2560 x 1440) Dome Camera with 2.8/ 3.6/ 6/8/12 mm fixed lens (as per site requirement). Each 11.00 10365.00 Rupees Ten Thousand Three Hundred SixtyFive Only 114015.00

110 DSR EnM 2025 40.4 Supplying Installation Testing and Commissioning of 4MP IP IR Outdoor Bullet Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

DSR EnM 2025 40.4 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

DSR EnM 2025 40.4 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

40.4.1 4MP @ 25/30fps@1440P (2560 x 1440) Outdoor Bullet Camera with 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) Each 4.00 10063.00 Rupees Ten Thousand SixtyThree Only 40252.00

111 DSR 2025 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

39.23.1 6U Rack Each 2.00 6939.00 Rupees Six Thousand Nine Hundred ThirtyNine Only 13878.00

112 1.58.1 Supplying and drawing of UTP 4 Pair CAT-6 LAN cable in the existing surface / recessed PVC concuit etc. as required. Meter 240.00 52.00 Rupees FiftyTwo Only 12480.00

113 1.21 Supplying & fixing of following size medium class PVC conduit along with accessories in surface/ recess including cutting of wall and making good the same in case of recessed conduit as required.

1.21.1 20 mm dia Meter 120.00 102.00 Rupees One Hundred Two Only 12240.00

114 DSR EnM 2025 40.10 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses for number of channels of NVR to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP, IR camera or more and must be ONVIF with minimum support of 256Mbps incoming Bandwidth 2) NVR should support H.265 or better, H.264, MJPEG, MPEG4 support 3) Must support 1 channel Input, 1 channel Output, RCA for Two-way Talk 4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 2 SATA Slots with 20TB capacity/ Slot. 6) Connectivity Interface : 1 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232 7) Backup Interface : Its should have 2 Nosx USB port (1x USB3.0, 1xUSB2.0) 8) Video Output Ports: 1x HDMI and 1 VGA 9) Alarm Ports: It should have 4/1 Ch In/ Out ports to connect various type of external sensors and output devices like hooter/ Siren etc.

DSR EnM 2025 40.10 10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic 11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing. 12) Protocols: HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS, SMTP, UPnP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC, RoHS and BIS Certified 14) Power Supply : Should support 12VDC, 4Amp or AC100-240V, 50/60Hz Power supply. 15) Operating Condition : Ambient Temperature (-5°C to 50°C), humidity 90% (max) (non-condensing) 16) The VMS, NVR application shall support all the features & functionalities of the offered cameras. 17) VMS should consist of Base license and Channel Licenses. VMS should be provided with camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage.

DSR EnM 2025 40.10 19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote monitoring over the Internet. 20) Must support Resolution: 7680x4320 (8K), 3840*2160, 1920×1080, 1280×1024,1280×720, 1024×768 21) Must support recording resolution upto 32MP 22) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 23) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page 24) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm. 25) It should support Network Support: HTTP, TCP/IP, SMTP, DHCP, DNS, DDNS, FTP, NTP, UPnP, Multi IP Setting. Convert multiple recording files to one avi/MP4 file. 26) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection.

DSR EnM 2025 40.10 27) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan 28) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 29) Built-In Artificial Intelligence: NVR should have built-in AI :- - 2 Channel face detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection 30) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or more with Face Detection speed of 12 face images/sec. 31) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender and umbrella. 32) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body, vehicle model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes.

DSR EnM 2025 40.10 33) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan, cybersecurity exception 34) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 35) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection. 36) Smart playback function: Should support smart search for the selected area in the video and smart playback to improve the playback efficiency 37) VCA (Video Content Analytic): Should support multiple video contented analytics based on camera analytics

40.10.1 08 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9, 2nd screen: 1/4/8/9 Each 2.00 10078.00 Rupees Ten Thousand SeventyEight Only 20156.00

115 DSR EnM 2025 40.12 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

40.12.1 4TB (Terabytes) Each 2.00 13943.00 Rupees Thirteen Thousand Nine Hundred FourtyThree Only 27886.00

116 DSR EnM 2025 39.1 Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

39.1.1 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. Each 2.00 35091.00 Rupees ThirtyFive Thousand NinetyOne Only 70182.00

117 42.4 Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required.

42.4.1 32 inch or larger Each 2.00 39590.00 Rupees ThirtyNine Thousand Five Hundred Ninety Only 79180.00

SUBHEAD-B(NON SCHEDULE ITEMS)

118 M/R Removal of aluminium panel for Recovery sqm 47.55 1250.00 Rupees One Thousand Two Hundred Fifty Only 59437.50

119 M/R DIGITAL 2D/3D WALL PAPER : Providing & fixing 2d/3d digital printing printing on approved paper/canvas/fabric media as per suggested graphic work on suggested surface .Contractor shall provide graphic work detail & 5 sqmm sample for approval the work shall be done inclusive of all rate with accesesories,tool tackel at allheight compelte. sqm 46.16 2312.00 Rupees Two Thousand Three Hundred Twelve Only 106721.92

120 M/R Wooden ceiling: Providing and fixing at all height false ceiling of 12mm thick MR garde plyboard including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS:277 and consisting of angle cleats of size 25mm wide X 15mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dast fastner 12.5mm diaX 40mm long with 6mm dia. Bolts to the angle hangers being of 25X25X5mm of required length, and other end of angle hanger being fixed with nuts and bolts to 6.1 channels 45mm X 15mm X 0.9mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm

with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to 6.1 channel with connecting clips made out of 2.64mm dia X 230mm long 6.1 mm wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive – all screws @ 230 mm interval including joining and fixing to a flush finish.

The wooden ceiling will be finished with the approved 4mm veneer finished with two coats of sealer and two coats of melamine polish as per directions and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channel suitably fixed finishing of all joints neatly to proper line & level including providing of additional framework for electrical fixtures, including giving trap doors where ever required. Diffusers, cutouts for fire sprinklers etc. as per the specifications approved by architects including necessary scaffolding supports, suspendors etc. all complete as per drawing and specification and direction of the Architect/PM. sqm 51.74 4574.00 Rupees Four Thousand Five Hundred SeventyFour Only 236658.76

121 M/R PLY WALL PANELING FINISH WITH VENEER FINISH : Providing & fixing 12mm thick IS 710 ply fixed on frame work. The framework shall be fixed as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c horizontally. The frame work shall be made from Aluminium section make JINDAL/HINDALCO conforming to IS specification In paneling, (intermediate, perimeter ) & (at vertical or horizontal joint of ply & at turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated with anti-termite treatment & hidden.

The framework shall be covered with approved make plywood(IS 710- 12 mm ply),adhesive ,tape, headless nails etc ,finished with Veneer ( veneer base 4 mm thick Gurjan ply) with semiglossy PU polish & in pattern as shown in the drawing. Rate shall be inclusiveg grooves etc complete as per drawing or as directed by EIC/ Architect.

The rate shall be in Sq.mt of actual paneling work for all floors, at all heights, all shapes .Rate shall inclusive of all material ,labor scaffolding, tools, tackles, for all heights and for all levels, Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights /air-conditioners ,grills, diffusers etc & providing additional sections for strengthening around the openings/cutouts, making grooves between wall & board or as per drawing /instruction of EIC. and no extra payment shall be considered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the paneling including openable shutter wherever required area and finish with the same material. Rate shall be inclusive of all item inclusive part of paneling Only the clear elevation area shall be measured and paid. sqm 13.23 6680 Rupees Six Thousand Six Hundred Eighty Only 88376.40

122 MR Provding and fixing PVC Soil ,Waste & vent pipes all complete

110 mm dia metre 24.00 222.00 Rupees two Hundred twenty two Only 5328.00

40 mm dia metre 12.00 25.00 Rupees Twenty five Only 300.00

123 MR Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 mm vent cowel Each 1.00 50.00 Rupees fifty Only 50.00

110 mm plain bend Each 5.00 150.00 Rupees one Hundred fiftey Only 750.00

110 mm door bend Each 4.00 205.00 Rupees Two Hundred five Only 820.00

110 mm dia X 45 Bend Each 4.00 150.00 Rupees one Hundred fifty Only 600.00

110 X 110 mm dia plain - y Each 2.00 234.00 Rupees two Hundred thirty four Only 468.00

110 mm pipe clip Each 4.00 27.00 Rupees twenty seven Only 108.00

110 X110 mm dia p-trap Each 4.00 320.00 Rupees three Hundred Twenty Only 1280.00

40 mm elbow Each 8.00 24.00 Rupees twenty Four Only 192.00

40 mm plain tee Each 4.00 31.00 Rupees Thirty one Only 124.00

124 MR Establishment of -2HP of submersible pump set of approved brand and make, all complete each 1 41117.00 Rupees FourtyOne Thousand One Hundred Seventeen Only 41117.00

125 MR Supplying and fixing recess mounted 3X20 watt COB based multiple zoom light make with all accessories, directly on false ceiling including connection with 1.5 sq. mm FR PVC insulated copper conductor cable and earthing the body etc. as required. (Track light) Each 11.00 5800.00 Rupees five Thousand eight Hundred Only 63800.00

126 MR Supplying and fixing Chandelier with all accessories, directly on false ceiling including connection with 1.5 sq. mm FR PVC insulated copper conductor cable and earthing the body etc. as required. Each 1.00 27390.00 Rupees TwentySeven Thousand Three Hundred Ninety Only 27390.00

127 Durian RADIANCE/3 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 3 Seater Sofa - Size (W)1920mm X (D)910mm X (H)920mm Crafted for modern living, this compact 3-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. With overall dimensions of 1920 mm (W) × 910 mm (D) × 920 mm (H) and a seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. Each 2.00 156400.00 Rupees One Lakh fifty six Thousand four Hundred Only 312800.00

128 Durian HOPPER/A/CT or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Wooden Center Table - Center Table Size (L)1130mm X (W)630mm X (H)410mm. The centre table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. Each 1.00 31800.00 Rupees Thirty one Thousand eight Hundred Only 31800.00

129 Durian HOPPER/A/ST or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Wooden Side Table - Side Table (L)680mm X (W)530mm X (H)460mm The Side table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. Each 2.00 25000.00 Rupees Twenty Five Thousand Only 50000.00

130 Durian RUSSET/3 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 3 Seater Sofa - 3 Seater Sofa Size (W) 2060mm X (D) 950mm X (H) 930mm. Seating Height 430mm, Seat Depth 550mm, Seat Width 1610mm, Back Height 540mm. Material & Subtype Premium Leatherette. Frame Material Solid Wood Upholstery Material Premium Leatherette. Filling Material Foam. Seat Material Premium Leatherette. Finish Matte. Colour & Colour Family Brown - Cinnamon. Each 1.00 111800.00 Rupees One Lakh Eleven Thousand Eight Hundred Only 111800.00

131 Durian RUSSET/2 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 2 Seater Sofa - 2 Seater Sofa Size (W) 1540mm X (D) 950mm X (H) 930mm. Seating Height 430mm. Seat Depth 550mm. Seat Width 1080mm. Back Height 540mm. Material & Subtype Premium Leatherette. Frame Material Solid Wood Upholstery Material Premium Leatherette. Filling Material Foam. Seat Material Premium Leatherette. Finish Matte. Colour & Colour Family Brown - Cinnamon. Each 2.00 88600.00 Rupees Eighty eight Thousand Six Hundred Only 177200.00

132 Durian HOPPER/A/CT or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Wooden Center Table - Center Table Size (L)1130mm X (W)630mm X (H)410mm. The centre table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. Each 2.00 31800.00 Rupees Thirty One Thousand Eight Hundred Only 63600.00

133 Durian HOPPER/A/ST or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Wooden Side Table - Side Table (L)680mm X (W)530mm X (H)460mm The Side table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. Each 3.00 25000.00 Rupees Twenty Five Thousand Only 75000.00

134 Durian HALX/371082/A or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase\ Visitor Chair - Chair Size (W)590mm X (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat. This is then encased in deep. Each 2.00 24800.00 Rupees Twenty Four Thousand Eight Hundred Only 49600.00

135 Durian BERRY/55001/A/3 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 3 Seater Sofa - 3 Seater Sofa SIZE : 1905MM L X890MM DX 870MM H AS PER IMAGE. MATERIAL : PREMIUM LEATHERETTE / STYLE : CONTEMPORARY , COLOUR : BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER / FINISH : MATTE. SUPPLYING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1905MM L X890MM DX 870MM H PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING, CONSTRUCTION INCLUDES MOISTURE CONTENT SHALL BE LESS THAN 10-12%. THICKNESS OF PLYWOOD USED MM SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL COMMON AND MOISTURE PROOF PLYWOOD TENTATIVE. UNDERSTRUCTURE FRAME IS 18 MM

THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. STRUCTURE COVERED WITH P. U. FOAM FIXED WITH ADHESIVE GLUE ,FRAME PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM, CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. STACK FOAM STRUCTURE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR,COMPLEMENTED BY STYLISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. SEAT : 510 MM D X 445MM H , ARMS HEIGHT @ 620MM / BACK HEIGHT @ 460MM . Each 1.00 68800.00 Rupees Eighty Eight Thousand Eight Hundred Only 68800.00

136 Durian BERRY/55001/A/1 or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase 1 Seater Sofa- 1 Seater Sofa SIZE : (W)960MM X (D)890MM X (H)870MM. MATERIAL : PREMIUM LEATHERETTE / STYLE : CONTEMPORARY COLOUR : BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER / FINISH : MATTE. SUPPLYING ONE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 960MM L X890MM DX 870MM H PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING, CONSTRUCTION INCLUDES MOISTURE CONTENT SHALL BE LESS THAN 10-12%. THICKNESS OF PLYWOOD USED MM SHALL BE 12 MM GRADE IS 303 INDIAN

STANDARD FOR COMMERCIAL COMMON AND MOISTURE PROOF PLYWOOD TENTATIVE. UNDERSTRUCTURE FRAME IS 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. STRUCTURE COVERED WITH P. U. FOAM FIXED WITH ADHESIVE GLUE ,FRAME PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM, CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. STACK FOAM STRUCTURE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR,COMPLEMENTED BY STYLISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. SEAT : 510 MM D X 445MM H , ARMS HEIGHT @ 620MM / BACK HEIGHT @ 460MM . Each 2.00 38400.00 Rupees Thirty Eight Thousand Four Hundred Only 76800.00

137 Durian MILBURN/CT or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Center Table - Center Table Size (W) 1200mm X (D) 600mm X (H) 455mm. Material & Subtype Engineered Wood - MDF. Table Top Material Engineered Wood. Leg Material Engineered Wood. Finish Matte. Colour & Colour Family Brown - Walnut. Dimension (W) 1200mm X (D) 600mm X (H) 455mm Table Top Thickness 20mm. Each 1.00 20000.00 Rupees Twenty Thousand Only 20000.00

138 Durian CLINT/A or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Office Table with Side Unit Return - Table Top Size (L)2200mm X (D)900mm X (H)755mm and with Side Unit Table Size (2200x1800x750)mm. The Table made of PLPB with matt finish. Made with a combination of engineered wood, this gorgeous desk has contrasting panels in black for a contemporary look. Coupled with a runner and storage for your files and cabinets, the Clint is a desk meant for the discerning tycoon. With a warm walnut finish, the dual tone finish of the desk adds to its overall style and finish. With an option of regular drawers and shuttered glass storage units you can take a pick of which unit suits you the best. Each 1.00 148600.00 Rupees One Lakh Forty Eight Thousand Six Hundred Only 148600.00

139 Durian RICH/37820/HB or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase High Back Revolving Chair- Chair Size (W)660mm X (D)500mm X (H)1265mm. Made From High-Density Foam, The Sink-In Cushions And The Cradling Backrest Provides Contouring Comfort For All-Day Seating. The Soft To Touch Premium Leatherette Upholstery Add Elegance To Its Look While Also Making It Stain & Fade Resistant. Features Such As Synchro Multi-Locking Mechanism, Pneumatic Height Adjustment, Tilt Tension Control, Etc, Let You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Thick Padded Headrest And Armrest Further Let You Sit In Absolute Comfort. A Strong Chrome Base Supports The Structure While The 360 Swivel And 55Mm Castors. Each 1.00 31400.00 Rupees Thirty One Thousand Four Hundred Only 31400.00

140 Durian MMPL/70011/CN or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Visitor Chair - Chair Size (W)590mm X (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat. This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. Each 3.00 14000.00 Rupees Fourteen Thousand Only 42000.00

141 Durian CLINT/C or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Back Unit- Back unit Size (1600x450x800)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. Each 1.00 55600.00 Rupees Fifty Five Thousand Six Hundred Only 55600.00

For Souvenir Shop

142 Durian CASH COUNTER (1200X600X1200) or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Cash Counter- Cash Counter Size (1200x600x1200)mm. ·67mm thk Sliding Tile Based Partition. Single Metal raceway cover at skirting level in Partition. Glass Partition in above the tabletop. Table top made of 25mm thk Prelamin particle board with pvc edges. Pedestal of 350Lx 450Dx725 HT (2 drawer + 1filling). PVC Keyboard Tray . Metal CPU Trolley. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Each 1.00 59600.00 Rupees Fifty Nine Thousand Six Hundred Only 59600.00

143 Durian MMPL/70006/MB or approved equivalent in Godrej / Usha Lexus / Howarth / Steelcase Medium Back Chair - MEDIUM BACK 360ø DEGREE REVOLVING CHAIR, * ALL OVER SIZE IS : 660MM LX 460MM DX 1090MM H , *THE CHAIR MADE OF FULL FABRIC IN BLACK/RED COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PP FIXED T SHAPE ARMS . * USE OF PLY : 12 MM THICK HOT PRESSED BWR PLYWOOD IS GRADE - 303WITH PVC ABS SEAT & BACK COVER . * SEAT: 40 ñ 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 ñ3 KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ñ 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 ñ3 KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : PUSH BACK MECHANISM . * ONLY SEAT SIZE IS 460MM LX 445MM DX 465-565MM H & THE BACK SIZE IS 430MM LX 500MM H * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH SMOOTH CASTORS. Each 1.00 14460.00 Rupees Fourteen Thousand Four Hundred Sixty Only 14460.00

144 MR D/S/I of the Following Cabinets / Showcases, all complete with full finishing, all as per instructions of E/I, to form a fully secure and sturdy system, along with any extra members for safety as required, all complete.

Elevation are to be measured, all complete, as per schematic drawing attached, with premium quality hinges / hardware - EBCO / HETTICH. (Elevation Area) Sqm 27.59 24500.00 Rupees TwentyFour Thousand Five Hundred Only 675955.00

145 Approval BCD SPLIT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to 50 deg. C & heating within O deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost.

1.1 1.5 TR ,5 Star Each 6 58500.00 Rupees FiftyEight Thousand Five Hundred Only 351000.00

1.2 2.0 TR ,5 Star Each 1 74500.00 Rupees SeventyFour Thousand Five Hundred Only 74500.00

Lakhisarai SH 18

29km 45km 30km 13.00km

21.00km Jamui Banka

Work Site SH 04 Daniyawan-Hilsa-Gaya Road

2 Km 55.00km 86.00km Koilwer

75.00km Patna Bypass 107

Fathua 2km Depot

S.No Material Source Pucca Gravelled Kutcha Total

1 Rail head Buxar 47km 0av km site 0 47km

2 Metal, chips, boulder Pakur via Manihari 470 0av km site 22 492km

3 Bitumen Fatuha 132km 0av km site 0 132km

4 Emulsion Patna 94km 0av km site 0 94km

5 Coarse sand Koilwer 56km 0av km site 1 57km

J.E. P.E. S.P.E.

B.R.P.N.N.L B.R.P.N.N.L B.R.P.N.N.L

Works Division, Ara Works Division, Ara Works Division, Ara

Dy. Chief Engineer

ANALYSIS OF RATE FOR CARRIAGE OF MATERIALS

1.Stone Chips below 50mm from Koderma

Rate Rs 3587.10 Per cum

STONE METAL BELOW 50mm

A Koderma range to Koderma rail head

Lead 4 km graveled 8 km Pucca

B Loading on wagon at rail head by manual means @ 3.5labour / 2.832m3 195.10

C Carriage for 175 km by railway = 185.10

D Fatuha station to work site

Lead 0 km Kutcha 15 km Pucca 0 km gravelled

3587.10 < 1450.36 Hence 1450.36 is admissable

Lead - 7km with 1km Kutcha

Rate Rs 947.00 Per %0 No

3.Coarse Sand from koilwar

Rate Rs 2806.30 Per cum

Rate Rs 366.62 Per cum

5. Cement and steel from patna

Rate Rs 602.00 Per mt

6.Stone metal/boulder from Pakur

Rate Rs 19859.10 Per cum

Boulder from Pakur

A Pakur range pakur to Pakur rail head

Lead 4 km graveled 8 km Pucca

B Loading on wagon at rail head by manual means @ 3.5labour / 2.832m3 195.10

C Carriage for 372 km by railway = 425.30

D Fatuha station to work site

Lead 0 km Kutcha 15 km Pucca 0 km Gravelled

19859.10 > 2782.15 Hence 2782.15 is admissable

7.Bitumen from Fatuha

For Gross Weight add 6% = 1.06 X 6402

Rate Rs 2095.94 Per mt

8.Emulsion from Patna

For Gross Weight add 6% = 1.06 X 6402

Rate Rs 6786.12 Per mt

A Loading on wagon at rail head by manual means @ 3.5labour / 2.832m3 402.00

B Carriage for 498.00km by railway = = 715.00

Add 7% for busy season charge = 50.05

Add 5.75% for development charge = 41.11

Add OTC + DTC =

C station to work site =

Lead 0 km Kutcha 470 km Pucca 22 km Gravelled

Hence 6786.12 is admissable

Lead - 2KM including 1km unsurfaced

Rate Rs 373.77 Per m3

10.RCC Pipe-1200mm Dia

Rate Rs 2200.43 Per m

10.RCC Pipe-1000mm Dia

Rate Rs 2115.10 Per m

Abstract for the Construction of Pathway near Bari Patan Devi Temple, Patna

S No. ITEM AMOUNT

1 CIVIL COST ₹ 3,346,446.00

2 CARRIAGE #REF! #REF!

Detailed Estimate fot the Construction of Pathway near Bari Patan Devi Tample, Patna

Sn. Item No. Item Of Work Description Length L/Dia Breadth B Height H/ Depth No. Quantity Unit Rate (Rs.) Amount (Rs.)

1 11.29.1 40 mm thick rough chisel dressed stone flooring over 20 mm (average) thick base including pointing with C.M 1:2 (1 cement :2 stone dust) with an admixture of pigment to match the shade of the stone with base 1:1:1 (1 lime : 1surkhi : coarse sand or 1:5 (1 cement : 5 coarse sand) Red Sand Stone 2400 1 2400.00 Sqm.

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 2400 0.75 0.1 180.00 Cum.

3 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. 2400 1 2400.00 Sqm.

MATERIAL STATEMENT SAND (cum) CEMENT (MT) BRICK (nos.) STONE CHIPS (cum) LOCAL SAND (cum) #REF!

Stone Flooring 69.60 21.60 2400.00 sqm

Brick Soling 51172.38 31.99 2400.00 sqm

local sand 180.00 180.00 cum.

Carriage Calculation Chart for the Construction of Pathway near Bari Patan Devi Temple, Patna

S No. Type of materials Qty Unit Rate Amount

1 Cement 21.60 MT #REF! #REF!

2 Sand 125.86 cum #REF! #REF!

3 Local Sand 211.99 cum. #REF! #REF!

4 Stone Chips 112.61 cum #REF! #REF!

5 Brick 51.17 Thous. #REF! #REF!

Grand Total #REF!

Grand Total = #REF!

Abstract for the Construction of 4.5m Wide Gate near Bari Patan Devi Temple, Patna

S No. ITEM AMOUNT

1 CIVIL COST ₹ 1,418,591.90

2 CARRIAGE #REF! #REF!

Detailed Estimate for the Construction of 4.5m Wide Gate near Bari Patan Devi Tample, Patna

Sn. Item No. Item Of Work Description Length L/Dia Breadth B Height H/ Depth No. Quantity Unit Rate (Rs.) Amount (Rs.)

Foundation Work

1 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. EXCAVATION

2 20.2.2 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).400 mm dia pile

Sand Filling(At Foundation)

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. SAND FILLING BELOW FOUNDATION

SAND FILLING BELOW PLINTH

Floor 15 0.5 1 7.50 cum.

Flat Brick Soling (At Foundation) FLAT BRICK SOLING BELOW FOUNDATION

4 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

FLAT BRICK SOLING BELOW PLINTH

Floor 15 1 15.00 Sqm.

PCC (At Foundation)

5 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) P.C.C BELOW FOUNDATION

P.C.C BELOW PLINTH

Floor 15 0.075 1 1.13 cum.

R.C.C WORK BELOW PLINTH LEVEL

6 5.33A.1+5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete. All work upto plinth level Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C.

PEDESTAL 1.80 1.40 0.30 2 1.51 Cum.

RCC (COLUMN BELOW PLINTH)

RCC (NGL & PLINTH BEAM)

TOTAL 8.32 Cum.

R.C.C WORK ABOVE PLINTH LEVEL

7 5.33A+5.33A.2.2+5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete.All works above plinth level upto floor V level.Beams, planth beams, girders, bressumers, cantilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. Add or deduct for providing richer or leaner mixes respectively at all floor levels.Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. RCC (ROOF BEAM)

TOTAL= 18.12 Cum.

RCC in Column / Stiffner (Above Plinth Level)

8 5.33A+5.33A.2.1+5.33B.1 Providing and laying in position machine batched, machine mixed andmachine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete Walls columns, pillars, posts cind struts Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. RCC (COLUMN)

UPTO THE PARAPET C1 0.45 0.35 6 1 0.95 Cum.

9 13.13.4 20mm plaster 1:6 (1 cement : 6 coarse sand) EXTERNAL 80 1 160 Sqm.

10 5.3 Add for plaster drip course/groove in plastered surface or moulding to R.C.C. projections. 15.00 1 15.00 m. ₹ 34.20 ₹ 513.00

11 5.14 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc. including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

12 13.39.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In two coats 40.00 1 40.00 Sqm.

CENTERING & SHUTTERING (FOUNDATION)

10 5.9.1 Centring and shuttering including strutting, proping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete PC1 2.30 1.50 0.8 1 6.08 Sqm.

PEDESTAL 1.80 1.40 0.3 2 3.84 Sqm.

CENTERING & SHUTTERING (COLUMNS)

11 5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. BELOW PLINTH LEVEL

ABOVE PLINTH LEVEL

UPTO THE PARAPET C1 0.45 0.35 6 1 9.60 Sqm.

CENTERING & SHUTTERING (BEAMS)

12 5.9.5 Centring and shuttering including strutting, proping etc. and removal of form for Lintels, beams, plinth bams, griders, bressumers and cantilevers. NGL BEAM 4.5 0.45 0.45 1 4.455 Sqm.

13 7.37.1.A Stone work ( machine cut edges veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Dressing of sand stone in veneer work 22 9.5 1 209.00 Sqm. ₹ 2,563.80 ₹ 535,834.20

14 7.40.1 Providing and fixing dry cladding upto 10 metre heights with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and / or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-Charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.) RED SAND STONE GATE 22 1.5 1 33.00 Sqm.

15 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 210.00 Sqm. ₹ 105.40 ₹ 22,134.00

16 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 210.00 Sqm. ₹ 137.00 ₹ 28,770.00

17 5.22 Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding all complete.

MATERIAL STATEMENT SAND (cum) CEMENT (MT) BRICK (nos.) STONE CHIPS (cum) LOCAL SAND (cum) 3192.58884

Sand Filling 16.38 16.38 cum

Brick Soling 519.40 0.32 24.36 sqm

Carriage Calculation Chart for the Construction of 4.5m Wide Gate near Bari Patan Devi Temple, Patna

S No. Type of materials Qty Unit Rate Amount

1 Cement 23.55 MT #REF! #REF!

2 Sand 41.87 cum #REF! #REF!

3 Local Sand 16.70 cum #REF! #REF!

4 Stone Chips 68.60 cum #REF! #REF!

5 Brick 0.52 Thous. #REF! #REF!

6 Steel 3.19 MT #REF! #REF!

Grand Total #REF!

Grand Total = #REF!