Laboratory renovation of Room No. 237 and sample processing unit at NRRI, Cuttack-6

Amount

Laboratory renovation of Room No. 237 and sample processing unit at NRRI, Cuttack-6

Dismantling and removing old damaged AC sheet and deposit ti to farm manager

Dismantling brick work above 3 mtr height and cleaning debrises from work site

12mm cement plastering with 1:6 CM

Ash bricks work in CM (1:6) for super structure

Aoolying water proofing chemical treatment on wall

Closed deep chipping & cleaning the surface for receive floor tiles

Premieer plastic paints two coats over primer

Finishing wall surface with acrylic wall putty

Priming 1 coat with wall primer

Aluminum Lovers with anodized aluminum section with 5 mm thick smoke glass.

Enamel painting two coats over door window & grill

Aluminum partition with anodized (Hindalco) aluminum section no. 9210 & 9207 horizontal & vertical member & section 4660 as tapered clip with 5 mm smoke glass

Aluminum sliding/push poll door with anodized (Hindalco) aluminum section with handle, lock & 5 mm thick smoke glass etc. complete.

Glass push pull Door with anodized aluminum section with heavy floor spring, S.S. handle (45cm) & 12mm thick clear glass with all around polishing complete.

Providing & fixing venation blind including cost of fabric stick & sliding board.

Supply and fixing vitrified tiles of indivisul size 600x600mm of approved make confirming to IS 13755 color printed series on 10mm thick polymer modified adhesive and filling joint with matching grout

Supply and fixing MS pipe 50mm including cutting and welding

Supply and fixing G.I. color sheet 0.5mm thick on roofs including drilling holes with L/J hooks and topi washer

Supply and fixing G.I. color Ridges 0.5mm thick on roofs gable including drilling holes with L/J hooks and topi washer

Outside wall painting with weatther silcoat, 2 coats over a coat of water primer after scraping and cleaning the surface.