Annual Repair and Maintenance Electrical works of Regional Office Baddi Himachal Pradesh

Amount

Electrical Manpower: (PART-I)

Electrician

Helper (on call basis)

Material Providing :(PART-II)

2 pair, 0.5 mm dia annealed copper conductor, FRLS PVC insulated, unarmoured, telephone cable

Wiring switches & accessories (providing & fixing)

Ceiling rose, 3 pin, 5 amps ISI marked

S.P. 5/6 amps, one way modular switch, ISI marked

S.P. 5/6 amps, two way modular switch, ISI marked

S.P. 15/16 amps, one way modular switch, ISI marked

3 pin 5/6 amps modular socket outlet, ISI marked

6 pin 15/16 amps modular socket outlet, ISI marked

Modular bell push, ISI marked

Stepped type Modular Fan regulator (2 module)

Telephone Socket outlet modular type

T.V. Socket outlet modular type

Modular base & cover plate for 1 module

Modular base & cover plate for 2 module

Modular base & cover plate for 3 module

Modular base & cover plate for 4 module

S.P. 5/6 amps, one way switch, piano type ISI marked

S.P. 5/6 amps, two way switch, piano type ISI marked

S.P. 15/16 amps, one way switch, piano type ISI marked

3 pin 5/6 amps socket outlet, piano type ISI marked

6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked

Bell push, piano type

Telephone Socket outlet piano type

T.V. Socket outlet piano type

Brass pendant holder

Call bell/ buzzer, single phase

Pvc batten/angle holder

CONDUIT (STEEL & PVC ) AND ACCESSORIES (Providing & fixing)

20 mm dia. ISI marked, PVC conduit

25 mm dia. ISI marked, PVC conduit

32 mm dia. ISI marked, PVC conduit

20 mm PVC bends

25 mm PVC bends

32 mm PVC bends

20 mm PVC couplers

25 mm PVC couplers

32 mm PVC couplers

20 mm iron staples/ saddles/ screws

25 mm iron staples/ saddles/ screws

32 mm iron staples/ saddles/ screws

METAL BOXES (Providing & fixing)

Modular GI box for 2 module

Modular GI box for 3 module

Modular GI box for 4 module

SCREWS, NUT BOTS AND OTHER ACCESSORIES

Al. Alloy/ cadmium plated iron screws, 20 mm

Iron screws, 40 mm X 6 mm

PVC fastener 40mm long

PVC clip for fixing cable

Rubber/ PVC bushes

GI saddles 19mm x 0.55mm for conduit

GI saddles 25mm x 0.90mm for conduit above 25mm

SWITCH DISCONNECTOR SFU AND MCCB (Providing & fixing)

32 amps. TPN, switch disconnector fuse unit (Panel mounted type) with ISI marked HRC fuses

3 pole MCCB, 100A, 16KA

3 pole MCCB, 125A, 16KA

3 pole MCCB, 150A, 16KA

4 pole MCCB,100A,30KA

4 pole MCCB, 125A, 36KA

MCBs, ISOLATORS, RCCBs AND MCB DBs (Providing & fixing)

6 amps. to 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity

6 amps. to 32 amps. ratings , SPN MCB, “C” curve, 10 KA breaking capacity

6 amps. to 32 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity

6 amps. to 32 amps. ratings , TPN MCB, “C” curve, 10 KA breaking capacity

40 amps., 2 pole isolator

63 amps., 2 pole isolator

40 amps., 4 pole isolator

63 amps., 4 pole isolator

2+2 way, SPN, single door, MCB DB

2+4 way, SPN, single door, MCB DB

4 way (4+12), TPN, MCB DB, double door, horizontal type

6 way (4+18), TPN, MCB DB, double door, horizontal type

4 way (4+12), TPN, vertical type, MCB DB, double door

8 way (4+24), TPN, MCB DB, double door, horizontal type

8 way (4+24), TPN, vertical type, MCB DB, double door

Full stator rewinding of ceiling fan (condenser type) fan of 1200 mm sweep including cleaning and insulating the stator slots, sleeving, soldering, wrapping of cotton tape,reassembling, varnishing and testing etc. complete.

Full stator rewinding of wall fan (capacitor type) of 400 mm sweep including cleaning and insulating the stator slots, sleeving, soldering, wrapping of cotton tape,reassembling, varnishing and testing etc. complete.

Full Stator rewinding of an Exhaust fan (condenser type) of 380 mm sweep 900 RPM including cleaning and insulating the stator slots, sleeving soldring wraping of cotton tape, varnisishing re-assembling and testing etc. complete.

Replacement of ball bearing of celling fan /wall fan/ exhaust fan including greasing, reassembling and testing etc.

Supply and erection of fan condenser (paper condenser) for celling fan / wall fan of following rating : The condenser is to be installed in existing celling fan after dismantling the defective condenser including connection and testing etc.

Condenser 3.15 microfarad.

Condenser 4 microfarad.

Providing blade set for wall mounting fan of 400 mm sweep.

Providing & fixing 3 pin 5/6 Amp plug top (modular type)suitable for 5/6 Amp socket outlet.

Providing & fixing 3 pin 15/16 Amp plug top (modular type) suitable for 15/16 Amp socket outlet.

Rewinding / repair of 3 phase motor alongwith pump including cleaning , varnishing, insulating , wrapping by connecting tape etc (7.5 KW)

Providing and fixing of 9 watt PL-LED tube 2-Pin type of following make as required with complete fitting (Bajaj,philips,havells,syska)

Providing & fixing LED Bulbs 9 watt with complete fitting (havells,syska,philips,Bajaj)

Providing and fixing of 18 watt LED T5 type Tube with all accessories like of following make as required complete fitting .(Bajaj,philips,havells,syska)

Providing and fixing of 18 watt PL-LED 4 PIN-type Tube with all accessories like of following make as required complete fitting (Bajaj,philips,havells,syska)

Providing & fixing LED Bulbs 45 watt with complete fitting (havells,syska,philips,Bajaj)

Providing and fixing of 8 watt LED PL tubelight (2-pin) type Tube with all accessories like of following make as required complite fitting .(Bajaj,philips,havells)

Providing & fixing of 5/6 Ampere extension board (5/6 way type) of make as required (Bajaj,Havells,Anchor,Philips,Honeywell)

Providing & fixing of 15/16 Ampere extension board (5/6 way type) of make as required (Bajaj,Havells,Anchor,Philips,Honeywell)

Dehydration of 400 kva Transformer inside the panel (including removal of moisture ,carbon slurry,etc by means of circulating oil along with Labour ,testing and machine charge etc.)

Supply & filling of new transformer oil having good resistance to high electrical stress ,high dielctric strength (50 kv/cm),etc

Providing & Fixing Led flood light 100 Watt with complete fitting (Philips/Havells/Bajaj/Murphy ) or its equivalent ISI Make .

Refilling of Co2 type fire extinguisher (5 Kg) suitable for Class-B & C.

Refilling Gas for split 1.5 tonne air conditioner .

Providing & fixing new Exhaust fan (condenser type) of 380 mm sweep 900 RPM with complete fiiting make Bajaj, Orient, Havells,Crompton,etc.

Providing PVC Batton Holder

Only Servicing & overhauling of existing LT panel with MCCB 800A,4P (1 incomer + 1 outgoing) feeder & interior spares (Busbar rating 800A) complete & put into the smooth & proper working condition as per the instruction by the engineer in charge.

Providing & fixing MCCB 800A, 4 pole (36 KA) in existing LT panel.

Refilling of water type fire extinguisher (9.5 Ltr.) suitable for Class-A fire.

R K G ELECTRICALS