Salem District - Tharamangalam Block - Construction of Anganwadi Building at Thathapillaiyur H/o Amaragundhi Panchayat in AGAMT - II - 2025-2026 Work No.17

Amount

Construction of Anganwadi Building in Thathapillaiyur H/O Amaragundhi

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil

Providing and laying of M.sand and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Supplying and Filling foundation and basement with filling carted earth in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.

Brick work in cement mortar 1:5 (One cement and five sand) using country bricks ground moulded of size 8 3/4" x4 1/4" x2 1/4"cm. For the following including curing,etc., complete complying with standard specification

I. Foundation and Basement

II. Superstructure- Ground floor

Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

I. Upto Basement

II. Superstructure- Ground floor

Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement and in all floors for RCC column footings, column, pedestals, plinth beam, grade beams, raft slabs, staircase steps, bed blocks, critical pier etc., using mild steel sheets of size 90 x 60 cm & 10 gauge stiffened, welded with steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90 cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specification and as directed (S.I.155)

Below GL

Above GL

Supplying fabricating and placing in position mild steel or nibbled for steel for all reinforced cement concrete works as per the desing given including cost of steel and binding wire in all floors etc. complete complying with standard specification (MS rods or RTS bars will be supplied department sally at section stores and cost will be recovered at issue rate). The binding wire shall be supplied by the Contractor.

Finishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, 10mm thick. including raking the surface. The rate is to include the cost of providing cement mortar beading or nosing for sunshades & staircase steps, landing slabs etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick. including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Towards the cost of Supplying & cost of steel Door of size 0.90 x 2.10 m including all charges etc, complete, complying with standard specification.

Towards the cost of Supplying & cost of steel Door of size 0.75x 2.10 m including all charges etc, complete, complying with standard specification.

Towards the cost of Supplying & cost of Supplying & cost of steel Window of size 1.20 x 1.30

Towards the cost of Supplying & cost of supply of RCC Jollies of size 0.60 x 0.45 m

Provision for Cuddapah slab 40 mm tk for Cupboards inclding Kitchen table, Conveyance and Fixing supply and fixing etc

Weathering Course Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete

Finished with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum.

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing of walls with glazed tiles of size 300 mm x 200 mm x 6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2

White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc complete

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats with approved Cement Paint over one coat of Primaring coat of Cement Paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying

Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing of Rainwater downfall pipe with necessary shoe, bends and clamps including etc

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 26

Light point

Fan point

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 38

Supply and Fixing of single box type 4 feet 24W LED Fiitting with complete with Electrnic ballast with TW round Blocks on wall or ceilling with conduit pipe suspension with PVC unsheathed copper leads from terminal to the fitting Market Rate

Supply and fixing of 32 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 143

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Service wire SD NO.64

Bulk Head fitting SD NO.83

Providing Water Supply and Sanitary arrangements 1000 litre HDPE tank

Provision for Sanitary arrangements including baby closet

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 106

Provision for Painting cartoons in front faching wall and Letters,Pictures ,Vegitables, leaders, Toys (outer) etc,

Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase near wet riser using50mm dia 304L GradeStainless Steel pipe of1.60mm thick will be provided withtubularsupports made of 304L Grade Stainless Steel pipeof 25mm dia of 1.60mm thick welded tothe railing. Thesupports will be grouted into thewall and provided with93.00mm thick StainlessSteel circular base plate of 304Grade. The rate shall included for grouting into concretewithnecessary supporting arrangementsthe hand rail in floorpolishing buffing, bonding, cutting, grinding, conveyance

TNEB service connection charges.

Provision for Rain Water Harvesting structure

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

P BASKARAN (BID ID -1309613)

R.Vasu (BID ID -1295586)

GOWTHAM CONSTRUCTIONS (BID ID -1298709)

G.S & Co. (BID ID -1310025)

SON CONTRACTOR (BID ID -1295235)

Kaviya Construction (BID ID -1292741)