SPECIAL REPAIR TO BLDG NO ET-14 IN CHUSUL COY AT AEC TRG COLLEGE AND CENTRE PACHMARHI.

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

Dismantling of timber scantling 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.

S&F mild steel rolled section conforming to Fe-290 (Gde E-165), angle or tee section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats and other connecting plates etc. complete all as specified and directed.

Demolition of cement concrete not exc 15 cms thick below or above ground level as in floor Paving etc including removal of demolished material from work site all as directed.

M&L Cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) 25mm thick as in floor finishes.

M & L coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4.

Demolition of brick work and stone/ boulder masonary built in cement mortar and lime mortar.

M/L for modular Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radius built in cement mortar( 1:4)

Dismantling false ceiling any description or in any thickness, including cover fillets complete all as directed by Engr-in-Charge.

M&L for suspended false ceilling comprising of non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 6mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified.

Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each

Taking down chowket or frame with shutter (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each

S&F second class HW plain, solid, straight chowkates and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

S/F 35 mm thick factory made 2nd class HW rail and style shutters (Two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per is 1003 (Part-I) kiln seasoned and chemically pressure treated.

S&F 35mm thick second class HW glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc divided into sq with plain chamfered or roundded mitred and rebated sash bars any numbers and fitted to chowkates

S&F 30mm thick factory made second class hard wood glazed and skeltron window shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note:-Size of member of shutters as specified in SSR Part-I (2009) section8 clause 8.20 (b).

S/F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be coucred with heat moulded wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side as gap insert for top rail bottom rail panelling of wood grain printed PVC sheet to be fited in the MS frame welded/seald to the stiles & rails with suitable PVC sheet beading and jointed together with saluent cement suppling & fixed in the framed site as per specification & drawing.

S/F PVC door frame of size 50mmx47mm made out of 5mmwood grain printed PVC sheet reiforced with ms squre tube as per specification and drawing

S&F 150mm anodised aluminium handles cast type of following size complete all as directed and specified.

S&F 100 mm anodised aluminium handles cast type of following size complete all as directed and specified.

S&F 200mm anodised aluminium barrel tower bolts of extruded section of following size complete all as directed and specified.

S&F 150mm anodised aluminium barrel tower bolts of extruded section of following size complete all as directed and specified.

S&F anodised aluminium sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of 250mm long size complete all as specified and directed.

S&F 100mm butt hinge, medium weight, cold rolled and fixed of following size complete all as specified and directed.

S&F 75mm butt hinge, medium weight, cold rolled and fixed of following size complete all as specified and directed.

S&F MS 150mm long ordinary rat tail springs plate type incl.rollar plate etc.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key, scrubbing down with water etc

M&L for 15mm thick plastering on other than fair faces of brick wall in CM (1:6) surface finished even and fair complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall in CM (1:4) surface finished even and fair complete all as specified and directed.

S&F bearing bars, tongues or water bars for window frames, window guard bars, plain, let in and fixed independently in wooden frame, L or T section supports for for shelves etc and similar article conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

Preparing new plastered surfaces and applying Three coats of white wash complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coats of colour wash complete all as specified and as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or wire staples complete all as specified and as directed.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

Point wiring with 1100 volts grade PVC insulated FR -LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

Point wiring with 1100 volts grade PVC insulated FR LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F angle holder, insulated polycabonate body with back plate complete.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x4 sqmm earth continuity conductor complete.

S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN "BN 108C LED 20S PSU CDL WH" or equivalent in Havells or GE Lighting as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Havells or GE Lighting as approved.

S&F energy efficient recessed/surface mounted LED luminaire 36 Watt suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required. Make - Philips cat ref no. RC365B LED33-5000PSU OD WH or equivalent in Wipro / Havells STRATO2x2 or C&S as approved.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make : Legrand/Hager/ Indoasian

Double pole 32 amp. Make : Legrand/Hager/ Indoasian

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in safe castody for repair.

Dismantling of ceiling fan from existing location any sweep of any make, cleaning throughly, servicing of fan motor & parts fitted there in, oiling, greasing to bush / bearings, replacement of unserviceable parts required, applying two coat of white synthetic enamel paint over one coat of primer on fan blades and body, re- assembling, testing hanging at site as directed.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.

M&L earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x6.0mm thick buried directly under ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate at a depth not less than 1.5m below ground level connected to and including galvanized iron wire 4.0mm not exceeding 7.5meters for each earth without protection pipe, including test point by means of bolts, nuts, check nuts, and washers made out of GI all as shown on plate No 5 of SSR Part I to the extent applicable to this item including necessary making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 6 mm dia MS bars 3 Nos both ways with lifting hook made out of 6 mm dia bar and testing on completion to achieve value complete all as specified and directed.

DEEPAK JAISWAL

SUBIR KUMAR ROY

Dev Enterprises

GHASI RAM SAHU