CERTAIN REPAIR TO ROAD AND ROAD FURNITURE UNDER

Amount

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/track coat with bituminous primer @ 5kg per 10 Sqm and laying bituminous Premixed semi dense asphaltic concrete 30mm thick (minimum consolidated thickness) with 5.5% binder content by weight of total mix, rolled and compacted with 8 to 12 Tonne power road roller to required gradient and camber complete all as specified Note : (a) Material for SDAC shall be mixed in hot mixing plant. (b) Mix design of bitumenous SDAC will be got done from approved Lab. (c) The pemix carpet shall be laid with mechanical paver.

Material and labour for premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) and binder content of 4.0% (paving bitumen VG-30) by weight of total mix using coarse aggregate grading 2 (upto 40mm size) rolled with 8 to 10 tonne power road roller including preparation / cleaning of surfaces complete all as specified and directed. Note : (a) Material for premix bituminous macadam shall be mixed in hot mixing plant. (b) The premix bituminous macadam shall be laid with mechanical paver. (c) The cost of aforesaid is deemed to be included in the quoted rate.

Repair to pot holes of depth not exc 30mm, area not exc 1 sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 30mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder @ 6.8 Kg per 10 Sqm, blinded with 0.06 cum of stone chippings 6.3mm size and again well rammed to true surface (including supply of premix macadam binder and chipping to uniform surface) depth of pot holes not exc 30mm complete all as specified and directed. Note : (a) Material for premixed bituminous macadam shall be mixed in hot mixing plant.

Material and Labour for marking lines dashes, arrows, letters etc on road pavement and the like of any width with using thermoplastic compound white paint hot applied 2 mm thick including glass with machine confirming to BS3262 and according to the specification laid down IRC & MORTH (Ministry of Road Transport & Highways) specification 2012 complete all as specified. Note:- Marking shall be carried out with thermostat machine

Supply and fix in replacement Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA-972 fixed with and inclusive MS stud of suitable size as per manufacturer instructions complete all as specified and directed

Supply and fix in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm vide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150mmx150mmx300mm )type B-1 complete all as specified and directed.

M & L for preparation of old surfaces and applying one coat of synthetic enamel paint on kerb stone of any description over 10cm girth or width not otherwise described complete all as specified and directed.

Sandeep Kumar

RATTAN CHAND CHANDAN AND CO

M/s Trade Linker Associates