REPAIR MAINT REPLACEMENT OF INTERNAL WIRING SUBMAIN WIRING CONTROL DBs MCBs U/S FITTING FIXTURES GEYSER EXHAUST FAN COLLING APPLIANCES AND CONNECTED MISC ITEMS OF WORK AT VARIOUS MD OTM ACCN AT ZONE A AND B AT KALIMPONG AND SHERWANI MIL STN UNDER G

Amount

Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.

Dismantling and taking down unserviceable main switches, DBs including sub main wiring etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light /Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC rectangular block with 3 mm thick plastic laminated sheet cover of suitable size (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per item No 3 here – in – before but for one light point controlled by Two Nos of 2 Way switches complete all as specified and directed by Engineer-in-Charge.

All as per item No 3 here – in – before but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm size complete all as specified and directed by Engineer-in-Charge.

All as per item No3 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size complete all as specified and directed by Engineer-in-Charge.

All as per item No 3 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per item No 3 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

All as per item No 3 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 4 Sqmm multi stranded and 4 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm dia, medium grade with all necessary fittings, concealed wiring , for light /Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC Boxes (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per item No 10 here – in – before but for one light point controlled by Two Nos of 2 Way switches complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 here – in – before but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per item No10 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 4 Sqmm multi stranded and 4 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size (concealed), medium grade with all necessary fittings, concealed wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated including flush metal box 2/4/6/8/12 module with module inner and outer plates for mounting moduler switches,socket outlet,regulator etc. complete all as specified or directed including testing on completion. Note :- Proper colour coding of PVC insulated copper wire should be maintained as red/yellow/blue wires for phases,black wire for neutral and green wire for earth. Two run of 1.5 Sqmm for phase and neutral and one run of 1.5 Sqmm for earth wire complete all as specified and directed by Engineer-in-Charge.

All as per item No 17 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board complete all as specified and as directed.

All as per item No 17 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

Supply and fix switch piano flush button, single pole, 5/6amps, one way all as specified and as directed.

Supply and fix switch piano flush button, single pole, 15/16amps, one way all as specified and as directed.

Supply and fix switch piano flush button, single pole, 5/6amps, two way complete all as specified and as directed.

Supply & fixing Bell push flush type, 5 Amps button all as specified and as directed.

Supply & Fixing Bell, AC 230 Volts single pole including mounting block all as specified and as directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply & Fixing Socket outlet 2 in 1, 3 pin, 5/6A all as specified and as directed.

Supply and fix Socket outlet 2 in 1, 3 pin, 15/16 Amp flush type all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5/6 amps flush type compete all as specified and as directed.

Supply and fixing switch socket combination 2 – in – one 6 Pin , 6 / 16 amps flush type universal complete all as specified and as directed.

Supply and fixing modular switch flush button ac 230 V single pole 6 Amp one way all as specified and as directed.

Supply and fixing modular switch flush button ac 230 V single pole 16 Amp one way all as specified and as directed.

Supply and fixing modular socket 6 Amp 5 pin combined all as specified and as directed.

Supply and fixing modular socket 6/16 Amp 3 pin combined all as specified and as directed.

Supply and fixing lamp/angle holder insulated body with back plate for batten fitting all as specified and as directed.

Dismantling of ceiing fans of AC single phase 230/240 volts of any make / model except old vintage and dismantling stator, rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire of existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, bind with cotton thread and varnishing over all with winding varnish, cleaning of bearing housing and shaft, replacing spares such as split pins, blade screws, condensor, ball bearing etc, as required and reassebling complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 2.5 MFD capacitor suitable for ceiling fan 100W complete all as specified and as directed.

Supply only ball bearings No 6203 suitable for ceiling fan of existing make type & sweep complete all as specified and as directed.

Taking down ceiling fan of any size and cleaning all type dust, oil stains etc, painting with one coat of syntatic enamemel paint by spraying and refixing properly in the same location complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs LED retro fit lamp B-22, CCT- 3000 K/ 6500 K holder base with poly carbonate body and aluminium heat shrink of 9 W complete all as directed. Cat Part No LHLDDDECBD2R009 of Havells or equivalent in Crompton/Surya.

Supply and fixing in repairs compact batten of aluminium strong body (Single side connection) suitable for single T8 LED tube rod including mounting block complete all as specified and directed. Make:- Cat part No-REGALBATTENT8UPTO2X22WSSBSWHNW of Havells or equivalent Philips/crompton.

Supply and fixing in repairs LED polycarbonate T8 tube, 20 Watt, CCT - 3000/4500/6500K 6500K, 2150 lm, Polycarbonate housing in opal finish provides glare free uniform light, 1800lm, 30000 burning hours, Inbuilt aluminum heat sink, Surge Protection- 3KV, single sided connection complete all as specified and directed. Cat part No :PHOTONULTRAE2.01213T8SSTL20WLED865SPC of Havells or equivalent Philips/crompton.

Supply and fixing in repairs LED lights fitting 4 Feet 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Cat Part No: BN 021 LED40S- 6500 PSU GR (4 ft), HSN Code 9405 of Philips or equivalent model of Bajaj / Crompton.

Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size and mounting block complete all as specified and as directed.

S & F in repairs LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.Make : Havells / Philips / Crompton.

Supply and fixing in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing in repairs Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base. Cat part No LHFOAJE1TN1I060 of Havells or equivalent model of Philips / Bajaj / Crompton.

Supply and fixing Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base including fixing arrangements. Cat Part No LHFXAMN1TN6F035 of Havells or equivalent model of Philips / Bajaj / Crompton.

Supply and fix in repairs round shape 6 watt 220 volts AC recessed type CCT- 3000 K/ 6500 K with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in repairs round shape 12 watt 220 volts AC recessed type CCT- 3000 K/ 6500 K with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in repairs round shape 15 watt 220 volts AC recessed type CCT- 3000 K/ 6500 K with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in repairs LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including suitable bracket and fixing arrangement complete all as specified and as directed.

Supply and fixing LED bed side lamp 3W LED Black 3000K Cat Part No 48042 of Philips or equivalent in Havells/Crompton.

Supply and fixing LED Picture light, 6 Watt, Make: Philips, Cat Part No 30973 or equivalent in Havells / Crompton.

Supply and fxing in repairs LED flood light, 20 watt, die cast aluminium housing, high quality light diffuser, robust driver, wide operating voltage 100V-240V, Colour temp- 6500K, Input power - 20 Watt, protection to IP 66, LED Beam Angle: 120°, Cat Part No LHEECNP7PB6J020 of Havells or equivalent in Philips / Crompton.

Supply and fix in repairs indoor LED PL-L Base lamp 4 pin, 18 watt, 6500K, 240 Volts, including taking down existing light fittings complete all as specified and as directed by Engineer-in-charge. Cat Part No PHOTONULTRAPLL419TL18WLED865SPC of Havells or equivalent in Philips / Crompton.

Supply and fixing in repairs LED Panel Driver for 9 W / 12 W round ceiling light of various models, Input voltage - 220 to 240V, Frequency - 50 to 60 Hz, ta - -10 to +45 degree celcius, PF ≥ 0.50, input current - 0.090Amps, complete all as specified and as directed by Engineer-in-charge.Cat Part No LSSLNW0169 of Havells or equivalent in Philips / Crompton.

Supply and fixing in repairs LED Panel Driver for 15 W / 18 W round ceiling light of various models, Input voltage - 220 to 240V, Frequency - 50 to 60 Hz, ta - -10 to +45 degree celcius, PF ≥ 0.50, input current - 0.090Amps, complete all as specified and as directed by Engineer-in-charge.Cat Part No LSSLNW0170 of Havells or equivalent in Philips / Crompton.

S&F TPN DB with suitable for TPN MCB incomer, double door (IP-54), 4 Ways, built- in 200 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 12 way 240 Volts AC complete all as specified and as directed.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified and as directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 AMP in the DB complete with connection testing and commissioning all as specified and directed by Engr-in-Charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length complete all as specified and as directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length complete all as specified and as directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall/roof .(Note Three run of 4 Sqmm including one run of 25 mm rigid non-metalic PVC conduit shall be measured as one unit length complete all as specified and as directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall/roof .(Note Three run of 6 Sqmm including one run of 25 mm rigid non-metalic PVC conduit shall be measured as one unit length complete all as specified and as directed.

M&L in repairs PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and as directed.

All as per item No 75 here-in-before but of size 175 x 100 x 50 mm complete all as specified and directed.

All as per item No 75 here-in-before but of size 200 x 150 x 50 mm complete all as specified and directed.

All as per item No 75 here-in-before but of size 250 x 200 x 50 mm complete all as specified and directed.

Supply and fix in repairs unservicable broken/burnt ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

Supplied & fixed in repairs on surface Rigid non-metallic PVC casing caping of size 25 mm including of all tees, bends, elbows and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down old broken PVC Casing caping and making good surface by plastering and 2 coat of paint complete all as specified and directed.

Taking down tubelights/wall fittings/Mirror lights/Bulk Head/Round ceiling lights/2'x2' rectangular/square ceiling light of any type, make & size and refixing in same position after completing repair work complete all as specified and as directed.

Taking down switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5/6 amps flush type and refixing in same position after completing repair work complete all as specified and as directed.

Taking down switch socket combination 2 – in – one 6 Pin , 6 / 16 amps flush type universal and refixing in same position after completing repair work complete all as specified and as directed.

Taking down switch piano flush button, single pole, 5 amps, one way and refixing in same position after completing repair work complete all as specified and as directed.

Taking down Bell, AC 230 Volts single pole including mounting block and refixing in same position after completing repair work complete all as specified and as directed.

Taking down Bell push flush type, 5 Amps button and refixing in same position after completing repair work complete all as specified and as directed.

Taking down ceiling rose surface bakelite 65 X 50 mm three terminal and refixing in same position after completing repair work complete all as specified and as directed.

Taking down switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type universal and refixing in same position after completing repair work complete all as specified and as directed.

Taking down lamp/angle holder insulated body with back plate for batten fitting and refixing in same position after completing repair work complete all as specified and as directed.

Taking down modular switch flush button ac 230 V single pole 6 Amp one way and refixing in same position after completing repair work complete all as specified and as directed.

Taking down modular switch flush button ac 230 V single pole 16 Amp one way and refixing in same position after completing repair work complete all as specified and as directed.

Taking down modular socket 6 Amp 5 pin and refixing in same position after completing repair work complete all as specified and as directed.

Taking down modular socket 6/16 Amp 3 pin combined and refixing in same position after completing repair work complete all as specified and as directed.

M&L in repairs Hylam Sheet including suitable size of 04 Nos brass screws and cutting of hylam sheet for mounting, switches, sockets, fan regulator etc. of size 100 mm x 100 mm and 3 mm thickness complete all as specified and as directed by Engr-in-charge.

All as per item No 93 here-in-before but of size 175 x 100 x 3 mm complete all as specified and directed.

All as per item No 93 here-in-before but of size 200 x 150 x 3 mm complete all as specified and directed.

M&L junctions boxes, plastic, round, four terminals concealed in wall including taking down old unserviceable junction box all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed.

Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place opening for inspection compete including back plate, heating element, inner copper tank etc, de-scaling back plate and heating element by cleaning with Sulfuric acid/ de-scaling compound and re-assembling of Geysers after repairs carrying out and re-fixing in same position (Replaced items such as spares measured and paid separately under relevent items) including making good to disturbed portin of walls with CM (1:3) or PCC (1:2:4 Type B1) and plastering the wall surfaces with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc, complete all as specified and as directed by the Engineer-in Charge. Note :- Any type of rubber gasket , rubber washer, screws , insulating tape required shall be deemed to be included in the quoted rate.

All as per item No.96 here in before but for descaling / cleaning the inner tank including denting and brazing the leakage joints / points till the leakage stops including carrying out minor repair of outer body surface, bottom and top cover complete all as specified and as directed by Engineer-in-charge. Note :- Any damage caused during the process of cleaning the geysers shall be made good by contractor at no extra cost by department.

Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place cleaning all type dust, stains etc, painting with one coat of syntatic enamemel paint by spraying and refixing properly in the same location complete all as specified and directed by Engineer-in-Charge.

S&F heavy duty stainless steel inner tank suitable for 25 Ltrs capacity Geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge.

S&F heavy duty stainless steel inner tank suitable for 50 Ltrs capacity Geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge.

S&F in replacement 2.0 KW capacity Heating Element, Push/ Screw type with ‘triangle cup/'O' Ring type' including making electrical connection complete all as directed by Engineer-in-Charge.

S&F in replacement 1.5 KW capacity Heating Element, Push/ Screw type with ‘triangle cup/'O' Ring type' including making electrical connection complete all as directed by Engineer-in-Charge.

S&F in replacement for Thermostat/autocut switches for geysers 25/ 50 Ltr capacities including making connection complete all as directed by Engineer-in-Charge.

Supply and fixing in replacement safety valve spring locked type with inlet coupling all as specified and directed by Engineer-in-Charge.

S & F in replacement of fusible plug for suitable capacity of geysers complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement indicator lamp round /rectangular and making electric connections (Red/Green) 220 Volts AC as per site requirement suitable for geysers complete all as directed by Engineer-in-Charge.

S&F in replacement glass wool for insulation of geyser 25/50 Ltrs capacity and any make all as directed by Engineer-in-Charge.

S&F in replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in replacement bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in replacement bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of outer body fabricated of 1.6 mm MS Sheet for geysers of 25 Ltrs capacity duly painted with spray point with clamps 02 Nos of with necessary nut bolts complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of outer body fabricated of 1.6 mm MS Sheet for geysers of 50 Ltrs capacity duly painted with spray point with clamps 02 Nos of with necessary nut bolts complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of geyser assembly suitable for 25 ltr capacity ISI marked including dismantiling of old unserviceable geyser assembly complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of geyser assembly suitable for 50 ltr capacity ISI marked including dismantiling of old unserviceable geyser assembly complete all as specified and directed by Engineer-in-Charge.

Supply & fixing PVC connection heavy duty with brass/PTMT nuts of reqd length not exceeding 300 mm with rubber & PVC washer suitable for 15 mm bore GI pipe complete for cold water.

Supply & fixing hot water outlet connection made of brass chromium plated with Union rubber washer suitable for 15 mm bore GI pipefor hot water.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified.

S&F in replacement plug top 15 Amps 240 Volts complete all as specififed and directed by Engineer-in-Charge.

S& F in replacement 2.5 Sqmm 3 core PVC insulated unsheathed stranded copper wire complete all as specified and directed by Engineer-in-Charge. MAKE:- ANCHOR/FINOLEX/PLAZA/ HAVELLS/ HPL/ POLYCAB

Dismantling of exhaust fans of 300/200/250/150mm sweep AC single phase 230/240 volts of any make / model except old vintage, dismantling stator, rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire of existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, bind with cotton thread and varnishing over all with winding varnish, cleaning of bearing housing and shaft, replacing spares such as split pins, blade screws, condensor, ball bearing etc, as required and reassebling complete all as specified and directed by Engineer-in-Charge.

Supply only ball bearings No 6203 suitable for fan of existing make type & sweep complete make NBC/SKF/TATA

Supply only 2.5 MFD capacitor suitable for exhaust fan of existing type & sweep complete of 300/250/150 mm capacity.

Taking down exhaust fan of any size and cleaning all type dust, oil stains etc, painting with one coat of syntatic enamemel paint by spraying and refixing properly in the same location complete all as specified and directed by Engineer-in-Charge.

M&L for shifting of exhaust fan from one place to another including making hole at new place and filling of hole at old place including all necessary electric connection, brick work, plastering and 2 coat of painting of size 150, 200, 250 and 300 mm dia all as specified and as directed.

Supply and fix in repairs unservicable broken/burnt ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Servicing AC Split type 1.5/2 TR indoor and outdoor unit cleaning of all parts i.e. cooling coil, blower motor ,fan blades, water tray, air filter, replacement of minor parts such as screws nuts, bolts, etc and wiring kit complete after completion testing complete including taking out and refixing or all as specified and as directed by Engr-in-Charge.

Taking out for repairing of defective AC Split type 1.5/2 TR indoor and outdoor unit and checking of wiring and rectification of defects including necessary dismantling and taking out for reparing and refixing and replacing spares as required complete all as directed by Engineer-in-Chare. Note:- Accessories / spares required for replacement shall be measured and paid separately under respective items.

Supply only Starting relay suitable for split AC complete all as specified and directed.

Supply only Running capcitor 45 mfd + 06 mfd suitable for split AC complete all as specified and directed.

Supply only Condenser fan blade suitable for split AC complete all as specified and directed.

Supply only Starting capacitor 100/120 mfd suitable for split AC complete all as specified and directed.

Supply & Fixing sealed unit compressor (replaced with original company repaired) for Capacity 1.5 Ton to 2 Ton suitable for split AC complete all as specified and directed.

Material & labour for Gas Charging R22 to split AC of any capacity complete all as specified and directed.

Supply & fixing Blower motor suitable for split AC complete all as specified and directed.

Supply & fixing Drain pipe suitable for split AC complete all as specified and directed.

Dismantling the blower motor of any capacity split AC,cleaning completely all the parts, taken out burnt out winding and fresh winding with super enamelled copper wire of existing sizes including varnishing, re-assembling of the motor by replacement of ball bearings including painting of two coats synthetic enamel paint of approved colour and testing complete all as specified and as directed by Engr -in- Charge.

Transporting of defective refrigerator of any make and capacity from MES store yard ro Contractor workshop for carrying out necessary repair and rectification of defects including necessary dismantling and taking out for reparing and refixing and replacing spares as required including bringing back to MES storeyard/ directed location after repair and testing complete all as directed by Engineer-in-Chare. . Note:- Accessories / spares/ Gas charging required for replacement shall be measured and paid separately under respective items.

Supply only Starting capacitor suitable for 190 to 230/250 to 345 Ltr capacity refrigerator.

Supply only Termostat switch suitable for 190 to 230/250 to 345 Ltrr capacity refrigerator.

Supply & Fixing Freezer chamber (Evaporator coil) suitable for 190 to 230//250 to 345 Ltr capacity refrigerator.

Supply & Fixing Compressor suitable for 190 to 230//250 to 345 Ltr capacity refrigerator.

Material & labour for Charging of refrigerant gas R-134A/R-22 for refrigerator & deep freezer.

Transporting of defective Deep freezer of any make and capacity from MES store yard ro Contractor workshop for carrying out necessary repair and rectification of defects including necessary dismantling and taking out for reparing and refixing and replacing spares as required including bringing back to MES storeyard/ directed location after repair and testing complete all as directed by Engineer-in-Chare. . Note:- Accessories / spares/ Gas charging required for replacement shall be measured and paid separately under respective items.

Supply only Capacitor 3 mfd suitable for 150 to 205/300 to 335 Ltr capacity deep freezer

Supply only Starting capacitor suitable for 150 to 205/300 to 335 Ltr capacity deep freezer

Supply only Filter strainer suitable for 150 to 205/300 to 335 Ltr capacity deep freezer

Supply & fixing Expansion valve suitable for 150 to 205/300 to 335 Ltr capacity deep freezer

Supply & Fixing Compressor suitable for 150 to 205/300 to 335 Ltr capacity deep freezer

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

MANOJ JINDAL

M/S JAYSHREE CONCERN

GEETA CONSTRUCTION

SANJAY MITTAL

MS BRAHMA CONSTRUCTION

SANJAY KAUSHIK