Furnishing of Water Quality Laboratory at Dimapur, Nagaland under National Hydrology Project (NHP)

Demolishing, Fixtures and Fittings

Roofing: Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of: G.S sheet 1.)Room 2.)Verandah 3.) Toilet

Dismantling woodwork in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead: of sectional area 40 sq centmetrs and above. ceiling frame(.075*.05) Ceiling of office, O&D room, Lab & Verandah

Dismantling cement asbestos, Celotax or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceale materials within 50 metres lead. Ceiling of office, O&D room , Lab & Verandah

Demolishing brick work including stacking of serviceable material and disposal of unserverciable material within 50 meters lead: In cement mortar. Lab Wall,Toilet Wall

Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material disposal of unserviceable material within 50 meters lead'. Toilet slab

Dismantling old plaster or skirting out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. Office floor , Oven & Distillation floor, Verandah floor.

Demoishing cement concrete including disposal of material within 50 meters lead 1:3:6 Ventilation

Taking out doors, windows and clerestory window shutters(steel or wood) including stacking within 50 meters lead: of area 3 sq. meters and below. (Window)

Civil Works

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom lift upto 1.5 m, including getting out of excavated soil and disposal of surplus excavated soil as directed within a lead upto 50m; disposal earth to be levelled. Foot path Area-1 & Foot path Area-2

Providing 100 mm thick soiling with approved quality of stone i/c carriage, watering, ramming , consolidation. Foot path Area-1 & Foot path Area-2

Providing & laying Cement Concrete in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain windows sills, fillets etc. upto a floor five level, excluding the cost of centering, shuttering. 1:3:6(1cement: 3coarse sand: 6 graded stone aggregate 20 mm nominal size.). Foot path Area-1 & Foot path Area-2

Providing Interlocking Paver Block, Concrete products with incentive package Zigzag type

Installation Charges

Supplying and filling in plinth with 100 mm thick fine sand or stone dust under floors including, watering ramming consolidating and dressing complete.

Half Brick masonry with bricks of class designation 75 in foundation and plinth in Cement mortar 1:3 (1 cement:3 coarse sand). i)Wall -ventilation area ii) Wall -window area and iii) Toilet Wall

Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar 1:6(1 cement:6 fine sand). i) Toilet slab-1 and ii) Toilet slab-2

12 mm cement plaster of mix 1:3(1 cement: 3 fine sand). i)Wall ventilation area , ii)Wall window area, iii)Toilet wall and iv) Toilet Slab

Providing trapezoidal Profile Sheet (width 1120mm) DYNA roofing complete(upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.0.60 mm thick. i)Office, O&D and Storage ii) Verandah and iii) Toilet

Providing Plain sheet ridges, gutter, valley fixed with polymer coated J or L hooks, bolts and nuts and screws complete.0.60 mm thick. Fascia & barge Board

Providing and fixing at all heights false ceiling of 12 mm thick tapered edge gypsum board confirming to IS 2095 including providing and fixing of frame work made of special sections power pressed from MS sheet and galvanized in accordance with zinc coating 600 as per IS 277 and consisting of angle cleats of size 25mm wide x 1.6 mm thick with flanges of 22mm and 37 mm at 1200mm center to center one flange fixed to the ceiling. complete. i)Office area ii) Oven and Distillation area iii) Lab. area-1 iv) Lab. area-2 and v) Storage area

Providing woodwork in frames of false ceiling, partition etc. sawn and put up in position. Second class wood. Verandah

Providing and fixing insulating board ceiling of approved quality with necessary nails etc.complete ( framework to be paid separately)12 mm thick. Verandah

Providing woodwork in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. Second class wood. Door-1

providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shuttes for doors, windows and clerestory windows. Complete Seasoned and chemically treated hollock wood, koroi, et. Door-1

In flooring on a bed of 10mm thick mortar1:4(1 apprpriate cement 4: coarse sand): Acid and alkali resistant tile. i) Office floor and ii) Oven and Distillation floor

In dado/ skirting on 12 mm thick mortar 1:4 (1 appropriate cement : 4 coarse sand): Acid and alkali resistant tile. i) Office Skirting ii) Office dados iii) Oven &Distillation Skirting iv) Oven and distillation dados v) Lab. Dados and vi) Storage room dados

Providing and fixing 1st quality ceramic glazed tiles conforming to IS:13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colours, shades except begundy, bottle green. Complete. i) Verandah Skirting and ii) Toilet Dados

Providing and laying ceramic glazed floor tiles 300x300 mm 1st quality conforming to IS:13755 of NITCO,ORIENT, SOMANY KAJARIA, or equivalent make in colours such as white, ivory, grey, fume red brown, laid on 20mm thick cement mortar1:4 including pointing the joints with white cement and matching pigment etc. i) Toilet Floor and ii) Verandah area

Precast terrazzo tiles of 22mm thick with graded marble chips of size upto 12mm laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1cement: 4 coarse sand). Dark shade using ordinary cement. i) Table slab

Distempering with oil bound washable distemper of approved brand and manufacture to give even shade.New work (two or more coats) over and including priming coat with cement primer. i) Office ii) Oven & Distillation iii) Lab. iv) Storage room and v) Toilet

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. i) Office ii) Oven & Distillation iii) Lab. iv) Storage room and v) Toilet

Finishing walls with water proofing cement paint "snowcem,-plus" of M/s Snowcem India Ltd., or equivalent of required shade New work(Two or more coats [email protected]/10 Sqm). i) Long wall ii) Short wall and iii)Toilet

Providing and fixing aluminium works for doors, windows, ventilators and partition with extrudued built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS 1285, fixed with rawl plug and screws or with fixing clips , or with expansion hold fasterners including necessary filling up of gaps at junction, at top, bottom and sides with required PVC / neoprene felt etc. Complete. Anodised aluminium(anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). i) Horizontal member ii) vertical member iii) Storage Room P/W-1 iv) Horizontal member v) Vertical member vi) Storage Room P/W-2 vii)

Providing and fixing 12mm thick prelaminated article board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 type II in panelling fixed in aluminium doors, windows shutter and partition frames with C.P brass/stainless steel screws etc. complete as per architectural drawings. Prelaminated particle board with decorative lamination on one side and balancing on other side. i)Office P/W and ii) Storage Room P/W

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extrudued built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plug and screws or with fixing clips. Complete Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868, minimum anodic coating of grade AC 15). i) Door-2 ii) Horizontall and iii) vertical

Providing and fixing 12 mm thick prelaminated article board flat pressed three layer or graded wook particle board conforming to IS 12823 Grade 1 type ll in panelling fixed in aluminium doors, windows shutters . Complete. Prelaminated particle board with decorative lamination on both sides. i) door-2

Providing and fixing glazing in aluminium door, window ventilator shutter and partitions etc. with PVC neoprene gasket etc. complete as per the architectural drawings with float glass panes of 4.0mm thickness. Replacement of Window Glass

Providing and fixing 12 mm thick prelaminated article board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 type II in panelling fixed in aluminium doors, windows shutter and partition frames with C.P brass/stainless steel screws etc. complete as per architectural drawings. Prelaminated particle board with decorative lamination on both sides. i)Lab. -Bottom Racks- Top & bottom Panel, Sides & partition panel, Back panel,Front panel ii) Lab.-Top Racks- Top , mid & bottom Panel, Sides & partition panel, Back panel,Front panel iii) Storage room Bottom racks- Top & bottom Panel, Sides & partition panel, Back panel,Front panel iv) Storage room Top racks @E-E'- Top, mid & bottom Panel, Sides & partition panel, Back panel,Front panel v) Storage room Top racks @ B-B' - Top, mid & bottom Panel, Sides & partition panel, Back panel, vi) Table-Top & Mid , Bottom ,Sides & partition panel,Front and Back panel,Mid partition vii) Drawer-Front and Back,Bottom,sides vii) Reagent Rack Horizontal member, Vertical member

Sanitary & Plumbing

Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. Brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required: Size 600X450X200mm

Providing and fixing P.V.C waste pipe for sink or basin including P.V.C. waste fittings complete. 40 mm dia

Providing and fixing white vitreous china water closet squatting pan (Indian Type) Orissa pattern W.C pan of size 580x440mm

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the wall and floor. 100mm inlet and 75 mm outlet

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (Full Flush) capacity- white

Prov.and fixing CP brass bib cock of approved quality conforming to IS:8931 with 15 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with PTMT nuts of approved quality, colour and make(Prayag or equivalent) for 15 mm nominal bore with 30 cm length

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Centrifugally cast (spun) iron S&S

Providing and fixing double equal plain junction of required degree 75x75x75x75 Centrifugally cast (spun) iron S&S

Providing and fixing terminal guard 75 mm Centrifugally cast (spun) iron S&S

Providing and fixing G.I pipes complete with G.I fittings, including trenching and refilling etc.(external work ). 25 mm dia. nominal bore

Providing and fixing G.I pipes complete with G.I fittings, and clamps including cutting and making good the walls etc.(internal work only). 20 mm dia. nominal bore

Electrical Works

Wiring with 1.5mm2 single copper cable in surface casing capping i.e providing and fixing anchor made 5A flush type switches and all other assessories as required i) Light point Short

ii) Light point Medium

iii) Light point Long

iv) Fan Point Medium

v) Exhaust Fan point medium

Wiring with 3Pin 5A Plug with single core copper cable 2.5mm2 in surface casing capping i.e providing and fixing anchor made 3Pin 5A socket outlet and 5A flush type switches and earthing the third pin etc as required i) Mediun point

Wiring with 3Pin 15A Plug with single core copper cable 4.0 mm2 in surface casing capping i.e providing and fixing anchor made 3Pin 15A socket outlet and 15A flush type switches and earthing the third pin etc as required i) Mediun points

Wiring for circuit / sub-main with PVC insulated copper conductor single core in surface casing capping etc as required i) With 1.5 mm2 cable S/core

ii) With 2.5 mm2 cable S/core

iii) With 4 mm2 cable S/core

iv) With 6 mm2 cable S/core

v) With 25 mm2 S/core 3.5 core armoured cable

Providing & fixing, drilling holes, connection etc as required i) Angle Holder with 15W LED Bulb

ii) Ceiling LED Light 12W with casing complete

iii) Ceiling fan 56" sweep complete with down rod, regulator, etc as required

iv) Exhaust fan with all accessories, etc as required

v) Air Conditioning Point box complete

vi) Isolator 63A, 2 Pole

vii) M.C.B. 16Amp

viii) T.P.N 100Amp

ix) Change-over Switch 100Amp

x) MCB Box, 6 Ways

Goods and Accessories

1 Ton Air Conditioning Capacity (Ton): 1 Ton Cooling Capacity: 3500 watts Star Rating: 3 Compressor: Rotary AC type: Split Sleep mode : Yes Remote Control: Yes Auto Start: Yes Timer: Yes Power input: 1110 watt Energy Efficiency Ratio: 3.7w/w Power requirement : 230 V 50 Hz. Coil Material: Copper Color: White Warranty on Machine: 1 year Warranty on Compresso: 5 Years Installation and commissioning: With Installation and Commissioning

1.5 Ton. Air Conditioning Capacity (Ton): 1.5 Ton Cooling Capacity: 5000 watts Star Rating: 3 Compressor: Neo Swing AC type: Split Sleep mode : Yes Remote Control: Yes Auto Start: Yes Timer: Yes Power input: 1752 watt Energy Efficiency Ratio: 3.7w/w Power requirement : 230 V 50 Hz. Coil Material: Copper Color: White Warranty on Machine: 1 year Warranty on Compresso: 5 Years Installation and commissioning: With Installation and Commissioning

Lab Stool Adjustable Height : Yes Normal Height (mm): 88 Back Rest Height (mm): 21 Diameter/Side length of Top : Seat Dia. 40 cm Max. height (mm): 995 Back rest thickness (mm): 20 Overall width/Dia. (mm): 650 Material of Back rest: PU foam covered with Leatherite Material of cushion: PU foam Cushioning in the stool Top Finish: with cushion No of legs in the under structure: 5 Shape of stool top: Round Material of Top: Mild steel Type of Stool: Revolving Back rest : With

Chair Seat Material : PU Foam covered with Fabric Materials of Fabric Back cover: 100% polyester fabric Material of Fabric of Seat Cover: 100% polyester fabric Overall Chair Height ± 15mm: 990 Thickness of MS plate Joining the under structure with seat: 1.2mm Chair Type : 360degreeSwivel, posture control with multilocking position synchronised mechanism Tilt Tension adjustment : Yes Height Adjustment ± 5 mm: upto 90 Arm: With Warrantee : 1 Year

Almirah Conformity to Indian Standard IS: 3312: Yes No of Shelves: 4 Type of shelves: Fixed Locker Provided: Yes No. of Doors: 2 Door stiffner upto full door: Yes Construction: Welded Lock: Three way bolting device controlled by lock Material: MS sheet Conforming to Quality Grade D of IS:513/2008 with amend no Material of Almirah Doors: Ms sheet Sheet thickness of Door in mm: 1 Sheet thickness of Sides, Back Top and bottom in mm: 0.80 Sheet thickness of Shelves in mm: 0.80 Sheet thickness of Pedestal in mm: 0.80 Material of lock:Lock having made of steel with zinc plated finish having brass levers and MAZAK/ ZAMAK bolts having zinc plated finish along with MAZAK/ZAMAK handle Material of Keys: Brass and steel finish Height (without Pedestal) (in mm)(+/-10mm): 2000 Width in mm (+/-7 mm): 910 Depth in mm (+/-5 mm): 480 Finish : Powder coated Warrantee: 3 year

Computer table Material : Three Layer prelaminated particle board (Wood Product) of grade II type II of IS 12823/Latest Length in mm(± 15mm): 915 Depth in mm(± 10mm): 460 Height in mm(± 10mm): 760 Type of keyboard tray: Prelaminated particle board keyboard tray Packing : Bubble sheet Colour of top: Brown Warrantee: 1 year

Table Table Top Material: 19mm thick Commercial Block Board BWP grade Conforming to IS1659 Length of Table Top ± 10mm: 1500 Depth of Table Top ± 10mm: 750 Height of Table ± 10mm: 750 Width of storage ± 10mm: 400 Depth of storage ± 10mm: 485 Storage provided : Both side Frame Type: Free standing Warrantee : 1 Year

NEO ENTERPRISES