RD road to Bijapada_Road_PMC Sealcoat_0.000 to 1.500

Clearing grass and removal of rubbish up to a distance of 50 mtr outside the periphery of the area and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per specification and as per the direction of Engineer -in –charge.

Construction of embankment with approved materials obtained from borrow pits with all leads & lifts , transporting to site by mechanical means within a lead of 5KMs spreading, grading to required slope & compoacting to meet requirement of table 300-2 & Clause 305 of MOSTRH Specification for Roads & Bridge works (4th Revision )

Providing , laying,spreading & compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing ,rolling with 3 wheeled roller 8-10 tonnes in stages to proper grade & camber etc complete as per direction of Engineer-in-charge. WBM-III

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 of MORD

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 OF MORD

Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH spefn. clause No. 508 complete.