Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹17.6 L+₹1.7 L (10.5%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹17.9 L+₹2.0 L (12.6%)Rejected-Finance | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹18.5 L+₹2.6 L (16.1%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹18.5 L+₹2.6 L (16.4%)Rejected-Finance | L5 | Rejected-Finance Higher bid value. |
Tender Value
₹17.5 L
EMD Value
₹35,000
Closing Date
3 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
SPL REPAIRS TO BLDG NO P 288 OF 178 MH AT NEW MIL STN GANGTOK
2023_MES_581824_2
8081A/E8
Open Tender
Civil Works
Item Rate
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
9 documents required · 9 mandatory
₹500
GE Gangtok
₹35,000
Yes
1 Jul 2023
5 Apr 2023
5 May 2023
6 Apr 2023
3 May 2023
12 Apr 2023
Amount
Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc.complete all as specified and directed.
Demolition cement concrete ( un reinforement) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.
Dismantling of wall and ceilling boards (fiber pulp insulation etc) or insulation boards.slabs/blankets any thickness including cover fillets complete all as specified and directed.
Dismantling old PGI/CGI sheeting of any gauge thickness, including Nainital, Sikkim or similar pattern roof/facia etc complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.complete all as specified and directed.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of area n. exc 1.5 sqm complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of area exc 1.5 sqm but n.exc 4.0 sqm complete all as specified and directed.
Supply and fix 0.50mm tihick pre -painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-charge
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed.
M&L mild steel rolled section as in main and cross beams, hips and jack rafters, purlin where connected to common rafter and running rails and guides for slidding door fixed with angle cleats etc conforming to Fe 410-W (Gde-250) including painted one shop coat of zinc primer paint (including preparation of surfaces) at contractors workshop before fabrication complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm stone agg) as in plinth protection, path etc finishing surfaces even and smooth without using extra cement including construction joints at every 3 m interval and each coner and provition of mastic filling complete all as specified and directed by the Engr-in-charge.
Material and Labour for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate as per IS 383 exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
M&L for providing precast cement concrete solid building blocks or slabs n.exc 10cm thick (with plain or interlocking joints as directed) in PCC type C-1 (1:3:6) using 20 mm graded stone aggregate setting in cement mortar (1:4) complete in wall all as specified and directed.
M&L for 20 mm thick rendering in two layers 10 mm each in cement mortar (1:4) with using water proofing compound in external layer as per manufacturer instructions on fair faces of brick / concrete surfaces complete all as specified and directed. Note water proofing compound measured separately
M&L 15 mm thick rendering on fair faces of concrete faces/brick wall faces of smooth without extra cement in CM 1:6 complete all as specified and as directed.
M&L for applying two coat of exterior emulsion (weather proof) paint over a coat of primer on new plasterd surface including preparation of new plasterd surface etc complete all as specified and directed.
M&L for applying three coat of white washing including preparation of new or previously untreated surface of ceiling complete all as specified and directed.
M&L for applying two coat of white wash on old plastered wall surface including preparation of old surfaces of wall complete all as specified and directed.
M&L for applying one coats of acrylic distemper, white or tinted over old surface of E-board ceiling surface complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distempery, over a coat of chalk whiting primer & over a coat of 3mm thick wall care putty complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper, white or tinted over old wall surface on a coat of 3mm thick wall care putty complete all as specified and directed.
S&F powder coated grid frame work for false ceiling comprising of the following sections for making partitions of 600 x 600m size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 28mm x 23mm x 0.3mm thick, cross tee shall be 24mm x 23mm x 0.3mm thick and wall angle shall be 20mm x 20mm x 0.3mm thick complete all as specified and as directed.
M&L 4mm thick E-board for insulation and accoustic purposes 595 x 595mm in size, fixed with staple on snap gird as in ceiling with including dusting of surface and applying tow coats of oil bound distemper over a coat of primer complete all as specified and as directed.
Hacking out old broken glass any thickness, size, quality or description from wooden frames glazed with putty complete all as specified and directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
M&L for 2nd Class hard wood timber scantling of any size or in any position such as truss, purlin etc and if in repairs, to replace old and decayed timber (including piecing scarfing etc of old and new timbers if required) and removing defective portions to store complete all as specified and as directed
Supply and fix plain framed, panelled shutter (two panel) 35mm thick with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commerial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-Charge.
M&L 2nd Class hardwood Glazed and skeleton shutters, 25mm thick open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, Chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I section 8 all as directed and specified.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tub fixing in opening as per specification and drawing complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bootom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rails on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the stiles & rails with suitable PVC sheet beading & joined together with solvent cement suppling & fixing in the frame at site as specification & drawing
M&L for 2nd class plain fillets. Square, rectangular or triangular in section, clean sawn of sec area exc 6 & n.exc 13 Sqcm scrured with nails or brads complete all as specified and as directed
Supply and fix MS butt hinges 100mm long complete all as specified and as directed
All as per item No 34 above but 75mm long complete.
Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
All as per item No 36 above but 100mm long complete all as specified and as directed
M&L for 150 mm long aluminimum handles cast type, anodised complete all as specified and as directed.
All as per item No 38 above but 100mm long complete all as specified and as directed
Supply and fix aluminium alloy anodised sliding door bolts 250 mm long with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.
M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
S&F 1mm thick stainless steel sink for kitchen with plugs, washers and waste pipe, wasters, including cantilever CI brackets connecting union 40 mm CP waste fitting and PVC waste pipe with CP PTMT fly nuts of required length pipes etc complete (overall size 460mmx405x178mm with bowl size 405mmx354mmx178mm) Make: Prayag Cat No 1216 or eqv model in Nirali/Supreme or equivalent as approved by GE.
S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay including a shop coat of primer including taking down old unserviceable ventilator complete all as specified and as directed.
S&F in repair factory made steel window with side hung shutter openable type including friction/box type hinges, steel handle and peg stay complete with glazing bars, dovetailed or welded complete including a shop coat of primeras all as specified and as directed.
S&F in repair framed work such as grills, gratings, etc, with ends of bars shouldered and/or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.
M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.
M&L for preparation of new or previously treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of syntheitc enamel paint over steel surface complete all as specified and as directed.
S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
S&F in repair stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
M&L preparation of old or previously treated wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over wooden surface complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels/drain including forming fair finished to drain channel complete all as specified and as directed.
Material & labour for non skid coloured ceramic tiles of 7 to 8mm thick ( Square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc conforming to IS-13712, grade B-II-(a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including cement screed bed/bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.
All as per Sl item No. 52 here-in-above but on vertical surface of wall like skirting/dado etc over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
Materials & labour for coloured glazed ceramic tiles of size (450mm x 350mm) x 7 mm thick as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&L for TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for TMT bars 5mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays betwen floors and beams etc complete all as specified and as directed.
Disconnecting existing tanks of capacity exc 500 ltr but n.exc 1000 Ltr setting aside (or lowering if required) for repairs clenaing etc and hoisting if required reconnecting and refixing in position (Cleaning repairing etc shall be measured & paid separately).
Supply & fix Rotational moulded polyethylene water storage tank of capacity 500Litre, ISI marked multi layer constriction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 25mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and as directed .
Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting in soft/loose soil for foundation complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and as directed.
M&L for walling of random rubble stone masonry, brought upto course, well bonded, bedded and solidly hearted built in cement mortar (1:4) complete, all as specified
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, bed plates including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
Taking down 15mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as specified and as directed.
Taking down 20mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as specified and as directed.
Refixing of old 15mm bore steel tubing and connections in new or old position (wall, ceiling or floor, etc) complete all as specified and as directed.
S&F galvanised steel water tubing 15mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.
S&F galvanised steel water tubing 20mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.
Supply and fixing white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 570 x 460 x 380 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed. Make Cera Cat No. S1053101S/P Trap or equivalent of make as specified in List of makes.
Supply and fix in repair Vitreous China squatting pan of ‘Orissa pattern’, of size 580 mm x 440mm (white) with integral foot rest‘P’ or ‘S’ trap, front or back inlet, any pattern (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. Make Cera Cat No. COVY S3010104 or equivalent of make as specified in List of makes.
Supply and fix in repair 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as specified. Make : Cera Cat No. B1010101 or equivalent of make as specified in List of makes.
Supply and fix in repair vitreous china, white colour, flat back, wash hand basin of size 63 x 45 x 22.5cm fixed with brackets , including providing 32 mm dia PVC waste pipe , 32 mm bore CP waste coupling and making all necessary connections complete as directed.Make : Cera Cat No. S2040104 or equivalent of make as specified in List of makes.
S&F as in repair 15mm bore one or two way Angular Stop Cocks, cast copper alloy,fancy type, chromium plated, with wall flange complete all as specified and as directed. Make : JAQUAR CODE- CON 059 KN or equivalent approved make.
S&F in repair 15mm bore bib taps two way cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed of Make : ESSCO Cat Pat No MQT 516 AKN or equivalent approved make
Supply & fix Bib tap , long body cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one. Make : JAQUAR Code : CON-107 KN or equivalent approved make.
S&F as in repair 110mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints fixed to wall, laid in trenches or in flooor with all necessary clamps, bolts, bends, Tee etc complete all as specified and as directed.
S&F in repair 110mm bore PVC(SWR) bends any radius complete all as specified and as directed.
Supply and fix PVC(SWR) 110mm junction single (Single T) equal or unequal complete all as specified and as directed.
S&F for PVC (SWR) 75mm pipes single socketed in any length with rubber ring joints, laid in trenches or in floor with necessary clamps, bolt, bends, Tee complete all as specified and as directed.
S&F for 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.
S&F 110mm bore PVC(SWR) vent cowl fixed in position complete all as specified and as directed.
Supply and fix PVC(SWR) 75mm junction single (Single T) equal or unequal complete all as specified and as directed.
S&F of PVC(SWR) floor trap 75mm bore complete all as specified and directed by the Engr-in-Charge.
Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in depth in soft/loose soils complete all as specified and as directed by the Engr-in-Charge.
Removing excavated materials(soil) to distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point.
S & F 20mm bore gun metal gate valves , ISI marked with iron wheel head ,screwed both ends for iron pipe and fixed complete all as directed and specified
S & F 15mm bore gun metal gate valves , ISI marked with iron wheel head ,screwed both ends for iron pipe and fixed complete all as directed and specified
S&F in repairs decorative type curtain rod, chromium plated with fixing brackets, stops and complete fitments complete all as specified and as directed.
Supply only Integral Water Proofing Compound, conforming to IS-2465-2003 and/or as approved, complete all as specified and as directed.
S&F in repairs 12mm thick prelaminated particle board,interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws as in cup board,shelves etc complete all as specified and directed.
Supply and fix 100mm size brass handles (decorative type) cast type polished bright complete all as specified and directed
S & F continuous ( piano) hinges with 30 mm width of flaps ( when open), mild steel bright finish or electrogalvanised fixed with stainless steel screws complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts, 75 mm long of extruded section complete all as specified and directed by the Engr-in-Charge. .
E/M Portion Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, inlcuding fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3 mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point/ fan point/ exhaust fan point/ call bell point controlled by one No 5/6 Amp one way switch complete all as specified and directed.
All as per Sl item No. 97 here-in-above but one light point controlled by one, one way 5/6 Amp switch.
All as per Sl item No. 97 here-in-above but one exhaust fan/ceiling fan controlled by one, one way 5/6 Amp switch.
All as per Sl item No. 97 here-in-above but one 3 pin 5 Amps switch socket outlet point on same board.
All as per Sl item No. 97 here-in-above but one 3 pin 5 Amps switch socket outlet point on independent board.
All as per Sl item No. 97 here-in-above but one call bell/buzzer point controlled by one bell push
All as per item No. 97 above but for one socket outlet of 15 Amps fixed on independent board with 4 Sqmm multistranded copper conductor wire FRLS PVC insulated and 4 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed.
S&F in repairs switch piano flush button,single pole, one way, 6 amps complete all as specified and as directed.
S&F in repairs bell push, flush type, 6 amps, 240 volts ISI marked all as specified and directed.
S&F in repairs ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and directed
S&F in repairs socket outlet 2 in 1 ,3 pin 5/6 Amp, ISI marked complete all as specified and directed
S&F in repairs switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed
S&F in repairs switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type,complete all as directed
S&F in repairs bell ding dong, AC single pole 220/240 volts white/ivory finish, surface type complete all as specified and directed.
S&F in repairs lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as directed.
S&F non metallic exhaust fan 250mm sweep , single phase 230/240 volts copper wounds, complete with all accessories as bird guard/louvers shutters etc including making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM (1:4) and finishing the surface as per existing colour scheme. Make-Model Ventil Air DX / DX-HS White of Havells or eqv approvved make as listed in PS.
S&F in repairs LED lights fitting 1x 18/20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed (Make : Crompton Cat No CCS-103-20-65-SL-DP-NWH or equivalent approved make as listed in PS)
Supply and fix integrated LED bulk head fittings of 10 watts, presure die cast housing acrylic diffuser and frame with IP 66 protection complete all as specified and as directed .Make Crompton Cat No LBHP-10-CDL or equivalent approved make as listed in PS)
M&L for concealed sub-main wiring along with main wire of size of 2 x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire, ISI marked FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and incl 25mm size PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for sunken boxes & making good to walls, floors etc complete all as specified and as directed. (Note : Three runs of Copper wire with one run of PVC conduit will be measured and paid as one length.)
S&F in repairs sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way with 200 Amps rated copper bus bar double door type complete and including taking down old DB with MCB complete all as specified and as directed. (Make : L&T cat No DBSPN008DD or equivalent approved make)
S&F in repairs MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB20400C to BB20630C or equivalent of approved make)
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB10060C to BB10320C or equivalent of approved make)
Supply, installation, testing and commissioning of electric water heater, storage vertical type, BEE 5 star rated, 25 Ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & sock proof ABS outer body, non-ferrous pressure plate with & including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified and as directed.Make Model No GHWAMGTWH025 of Havells or eqv as approved make.
Refixing of electric water heater 25 Ltr capacity in new or old position after repair work including replacing hot & cold PVC connection pipe (01 No each) etc complete all as specified and as directed.
M & L for earthing in repairs complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed .
M/S MANOJ VERMA
Hanuman Prasad Agarwal
BIJAY MITTAL
KAMLESH ENTERPRISE
DHARMINDER SINGH
BHARAT ELECTRIC
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .