Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-AOC | L1 | Accepted-AOC Low in Cost | |
| 2 | L2₹5.9 L+₹8,350 (1.44%)Rejected-Finance | L2 | Rejected-Finance High in Cost | |
| 3 | L3₹6.4 L+₹58,900 (10.2%)Rejected-Finance | L3 | Rejected-Finance High in Cost | |
| 4 | L4₹7.0 L+₹1.2 L (21.3%)Rejected-Finance | L4 | Rejected-Finance High in Cost |
Tender Value
Refer Docs
EMD Value
₹17,100
Closing Date
18 Mar 2020, 3:00 pmClosed
Chief Engineer
Chief Engineer VOCPT Tuticorin 628004
Marking of Thermoplastic reflective paint lanes at Green Gate IN and OUT in VOC Port Trust
2020_VOCPT_44510_1
16HMTC/2019-20/D 336
Open Tender
Civil Works
Item Rate
90 days
VOC Port Trust
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹17,100
16 May 2020
27 Feb 2020
19 Mar 2020
27 Feb 2020
18 Mar 2020
27 Feb 2020
Amount
Providing and laying of Hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms. per Sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 for centre line and edge line. The finished surface to be level, uniform and free from streaks and holes etc., The rate including cost and conveyance of all materials, labour, incidental charges, marking for applying paint, brushes, equipments etc., complete as per MORTH Specification No.803 and as directed by the departmental officers.
Providing and fixing Reflective Road Studs of 'Category - A' Raised pavement markers made out of poly carbonate / methyl methecrylate/ABS mouled body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D 4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW / NH 33023 / 10 / 97 - DO.III, dt 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum refelctive area of 13 Sq.cm. on each side and the slope to the base shall be 35 +/- 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of dia not less than 19 +/- 2 mm and height not less 30 +/- 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacture's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg. tested in accordance with ASTM D4280 and confirming to IRC 35 - 2015 guidelines and MORTH specification 804 etc., complete. The cost inclusive of studs and other tools and plants fixing materials drilling holes etc., complete as per MORTH Specification and as directed by the departmental officers.
SRI BALAJI CONSTRUCTION
vairamuthu
BETHELEHEM ENGINEERING WORKS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .