- Construction of Vety. Dispensary at Saloh Beri Tehsil Ghanari Distt. Una (HP)

Amount

Banking excavated earth in layers not exceeding 20cm (Twenty millimetre) in depth, breaking clods, watering, rolling each layer with ½ (one oblique two) tonne roller, or wooden or steel rammers, and rolling every third and top-most layer with power roller of minimum 8 (Eight) tonnes and dressing up, in embankments for all type of civil work etcetera complete in all respect as per direction of Engineer-in- Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Excavation in all kind of soil work by mechanical means (Hydraulic Excavator (3D) with driver and fuel)/ manual means in foundation trenches or drains in all kind of soil, including dressing of sides and ramming of bottoms, upto any lift, including getting out the excavated soil and disposal of surplus excavated soils as directed, within any lead as per the direction by Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Excavating trenches of required width for all kinds of soils for drain, pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimeter) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within any lead The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 1:4:8 mechanically mixed (one cement: four sand: eight graded crushed stone aggregate 40mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:3:6 (one cement:three sand: six graded crushed stone aggregate 20mm (twenty millimeter) nominal size excluding cost of centring and shuttering in foundation and plinth as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:3:6 (one cement:three sand: six graded crushed stone aggregate 40mm (forty millimeter) nominal size excluding cost of centring and shuttering in foundation and plinth as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level up to all floor level in all shapes and sizes in cement mortor 1:6 (one cement: six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying damp proof course 40mm (Forty millimeter) thick with cement concrete 1:2:4 (one cement: two coarse sand: four graded crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size and curing complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.70 kg (one point seventy kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in cement mortor 1:6 (one cement isto six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level in any floor/height in cement mortor 1:4 (one cement isto four coarse sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work in Foundations, footings, bases of columns etcetera as per HPPWD specifications for mass concrete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Suspended floors, roofs, landings, balconies and access platform as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Edges of slabs and breaks in floors and walls under 20cm (twenty centimeter) wide as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (Fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement with M-25 (M-twenty five) design mix with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre including curing complete excluding cost of form work upto all height as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing steel reinforcement and Thermo-Mechanically Treated bars of grade Fe-500D or more approved make i.e. SAIL, RINL,Shyam Steel/TISCO, Jindal Panther (JSPL) for reinforced cement concrete work including bending cutting straightning and placing in position binding all complete upto any floor level/height as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing second class deodar wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) thick second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. Second class teak wood as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 35mm (Forty millimetre) second class teak wood wire gauge shutters using galvanized mild steel wire gauge of average width of aperture 1.4mm (one point four millimetre) in both directions with wire of dia 0.63mm (zero point six three millimetre) for doors, windows and clerestory windows with hinges and necessary screws as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetre) thick ISI marked flush door shutters conforming to IS : 2202 of Centuary ply board /Kitply) green ply (Part I) decorative type, core of block board construction with frame of first class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing 40x5mm (Forty into five millimetre) flat iron hold fast 40cm (Forty centimetre) long including fixing to frame with 10mm (Ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimetre) 1:3:6 mix (one cement isto three coarse sand six graded stone aggregate 20mm (twenty millimetre) nominal size) complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 300x16mm(Three hundred into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x16mm(two hundred fifty into sixteen millimeter) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) aluminium handles make of PILOT/Sheel, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. (mild steel) grills of required pattern in frames of fixed to steel windows by welding etcetera with M.S.(mild steel) flats, square or round bars etc. including priming coat with approved steel primer all complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

40mm (Twenty millimetre) thick Cement concrete flooring 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate) with 20mm (twenty millimetre) nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etcetera complete as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeters) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeters) in girth and finished even and smooth in cement mortor 1:4 (one cement: six sand) as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

20mm (twenty millimeters) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeters) in girth and finished even and smooth in cement mortor 1:4 (one cement: four sand) as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying smooth finishing of the exposed surface of R.C.C. work with 6mm (Six millimetre) thick cement ortar 1:3 (one Cement isto three sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, soak pit etcetera, including watering, ramming, consolidating and dressing complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 1:4:8 mechanically mixed (one cement: four sand: eight graded crushed stone aggregate 40mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying vitrified floor tiles 600x600mm (Six hundred into six hundred millimetre) (thickness specified by the manufacturer) make of Kajaria/NITCO/ Somany/ Orient/RAK/ Johnson & Johnson with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of required colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm (at the rate three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etetera, complete upto all floor levels as per CPWD specifications 2019 and as per direction and entire satisfaction of the Engineer in charge including entire carriage of materials with in all leads, lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying priming coat make of ICI/ Nerolac/Berger/ Assian Paint/ Shalimar over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting readymixed paint brushing wood primer pink complete in all floor level/height as per CPWD specifications 2019 and as directred by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety litre per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seven five litre per ten square meter) of approved brand and manufacture ICI (Dulex Gloss)/ Nerolac/ Berger (Luxol High Glass)/ Asian Paint (Premium ApcoliteGlass)/ Shalimar make in all height/ in all floor level as per CPWD specifications 2019 and as directred by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand make of ICI, Nerolac, Berger, Assian Paint, Shalimar on undecorated wall surfaces (two coats) @ 3.84 Kg/10 Sqm (at the rate three point eight four kilogram per ten square metre) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete upto all floor level/height as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including water thinnable priming coat with cement primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth, priming coat with distemper primer as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) diametre on wall face unplasticised Rigid PVC rain water single socketed pipes of approved brand make of Finolex/ Supreme/ AKG/ Prince/ Kisan/ SFMC/Diplast conforming to IS: 13592, Type A of working pressure not less than 4.5 kg/sq. cm (four point five kilogramme per square centimeter) including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, filling the joints with approved adhesive complete upto any height as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimetre) diametre Coupler unplasticised Rigid PVC moulded fittings/accesseries for on wall face rain water pipes of approved brand make of Finolex/ Supreme/ AKG/ Prince/ Kisan/ SFMC/Diplast conforming to IS: 13592, Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, filling the joints with approved adhesive complete upto any height as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimetre) diametre bend unplasticised Rigid PVC moulded fittings/accesseries for on wall face rain water pipes of approved brand make of Finolex/ Supreme/ AKG/ Prince/ Kisan/ SFMC/Diplast conforming to IS: 13592, Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, filling the joints with approved adhesive complete upto any height as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimetre) diametre plain shoe unplasticised Rigid PVC moulded fittings/accesseries for on wall face rain water pipes of approved brand make of Finolex/ Supreme/ AKG/ Prince/ Kisan/ SFMC/Diplast conforming to IS: 13592, Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, filling the joints with approved adhesive complete upto any height as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

White/coloured glazed tiles 200 x 300 x 6mm (two hundred into threehundred into six millimeter) thick of approved grade make of Kajaria, NITCO, Somany orient, RAK, Johnson & Johnson in skirting ,riser of steps and dado 12 (Twelve) milimeter thick cement mortor 1:3 (one cement :three sand ) and jointed with white cement slurry complete any floor level/ height as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying common burnt clay F.P.S. (non modular) brick tiles of class designation 10 (Ten) over mumty roofs, grouted with cement mortar 1:3 (one cement isto three fine sand) mixed with 2% (two percent) of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (one cement isto three fine sand) and finished neat as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying mud phuska on bitumen painted roof, 25mm (twenty five millimetre) thick mud plaster with chopped straw laid over layer of 75mm (seventy five millimetre) avarage thick rammed earth load in slope complete as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing plinth protection 50mm (Fifty millimeter) thick with cement concrete 1:3:6 (one cement isto three coarse sand (Zone-III) isto six graded/ stone aggregate 20mm (twenty millimeter) nominal size over 75mm thick bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excomption, levelling, dressing and finishing the top smooth complete in all floor level/height as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 200mm (two hundred millimeter) wide cast iron rungs chequered or ribbed non slip surface including fixing in manholes with 200x200x100mm (Two hundred into two hundred into one hundred millimeter) cement concrete 1:3:6 (One cement isto Three sand isto Six graded stone aggregate 20mm (Twenty millimeter) nominal size and curing complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

12 mm thick plain cement mortar sunk bands in cement mortar 1:4 (1 cement : 4 fine sand): complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:1½:3 (1 cement : 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size). in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing upto all height as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Suplying at site angle iron post and struts of required size including bottom to be split and bent at right angle in opposite direction for 10cm (Ten centimetre) length and drilling holes upto 10mm (Ten millimtre) diametre etcetra as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Fencing with G.I. barbed wire to angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.

Constructing course rubble hammer dressed ‘U’-shape open surface drain with side wall 15x22cm (fifteen into twenty two centimeters) in cement mortar 1:6 (one cement is to six sand) and in side plastering with cement plaster 1:3 (one cement is to three sand) including earth work and laying 10cm (ten centimeters) cement concrete in 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeters) nominal size) and 7.5cm (seven point five centimeters) cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) and finished with a floating coat of neat cement complete as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure 1216 (16 mm OD) pipe internal work exposes on wall Kitech make conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre spacing. This includes testing of joints complete as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure 1620 (20 mm OD) pipe internal work exposes on wall Kitech make conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre ( spacing. This includes testing of joints complete as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Making connection of G.I. distribution branch with G.I. main of 20mm to 40 mm (twenty millimetre to forty millimeter) nominal bore by providing and fixing tee, including cutting and threading the pipe etcetera complete complete as per CPWD specifications 2019 and as directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and placing three layered PVC (Poly Venyl Chloride) water storage tank ISI marked 12701 (Twelve thousand seven hundred one) Sintex/Supreme/Finolex make tripple layer complete in all respects, with necessary fittings including over flow pipe ball valve, scour pipe, with polythene float valve, PVC cover with locking arrangement including providing pads of sizes as required for inlet and outlet complete upto all floor level as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing in trenches 100mm (one hundred millimeter ) dia pipe PVC (Finolex Supreme, AKG, Prince, Kisan, SFMC, Diplast make) pipes of working pressure not less than 4.5 kg/sq. cm (four point five kilogramme per square centimeter) including filling the joints with approved adhesive complete upto any height as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimeter) nominal size M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter complete upto any height as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing P.V.C. Plain Bend 100mm (One hundred millimetre) (Nominal diameter) of required degree ISI marked including fixing with approved adhesive etcetra complete per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) dia PVC door bend of approved quality Finolex make with oval access door insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI makred complete including fixing with approved adhesive etc. complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing ISI marked 100mm (One hundred millimetre) nominal diameter P.V.C. cowl, including fixing with approved adhesive complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mmx75mm (one hundred ten millimeter into seventy five millimeter) nominal size PVC floor trap approved quality Finolex make of self cleaning design including fixing with approved adhesive including cost of cutting and making goods the walls and floors etc. complete as per CPWD specifications 2019 and as per directions and entire satisfaction of the Engineer in charge. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE Orissa pattern vitreous China water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimetres) ( earth work, bed concrete, foot rest and trap to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 10.00/12.50/15.00 (Ten/ twelve point five/ fifteen) litres capacity PTMT coloured/white automatic flushing cistern with a pair of PVC/C.I. or M.S. brackets complete with fittings including PVC syphonic approved mosquito proof lid, PVC unions and couplings for connection with inlet, outlet and over flow pipes including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked sand cast iron 100mm (One hundred millimetres) size P’ or S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (One cement isto one sand) complete and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 600mmx20mm (Six hundred millimetre into twenty millimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. brass bracket fixed to wooden cleats with C.P. brass screws, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked, 100mm (One hundred millimeter) dia. C.P grating of approved manufacture for gully, floor or Nahni trap complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked, 100mm (One hundred millimeter) diametre PVC tee jointing with approved adhesive complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing viterous china wash basin of Hindware/Cera Delta No. 10010 of size 550x400mm (Five hundred fifty into four hundred millimeter) of snow white shade with single hole for pillar tap with GI or MS bracket painted with white color etcetra complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete Hindware or cera make as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen millimeter) diameter C.P. (Chromium Plated) Brass Bib tap No. 12 (Twelve) with capstan head of approved manufacture as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass stop cock (concealed) of standard design and of preferred conforming to IS:8931 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore 45cm (forty centimetre) long uplasticised PVC connection pipe with brass unions of preferred as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty milimeter) nominal bore C.P. (Chromium Plated) brass full way valve with wheel of approved manufacture as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) nominal diameter PVC (Poly Venyl Chloride) waste pipe for wash basin or sink including brass check nut complete as per approved drawing, design, specification and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimeter) internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (one cement : one and half Fine sand : three graded/crushed stone aggregate 20 mm (twenty millimeter) nominal size), foundation concrete 1:5:10 (one cement : five fine sand : ten graded/crushed stone aggregate 40 mm (forty millimeter) nominal size), inside plastering 12 mm (twelve millimeter)thick with cement mortar 1:3 (one cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm (four hundred fifty five into six hundred ten millimeter and 45 cm (forlty five centimeter) deep for single pipe line with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded/ crushed stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded/crushed stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 graded/ crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design inside size 80x80cm and 500cm deep including C.I. cover with frame (medium duty) 455x610mm internal diameter, total weight of cover and frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying cast iron cover without frame for manholes internal dimension 455mm x 610mm (four hundred fifty five millimeter into six hundred ten millimeter) rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg. (twenty three kilogram) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

ROHIT JASWAL