Open e-tender for the work of Upgradation and improvement of Railway Institute at Malda under Assistant Engineer/Malda in the jurisdiction of Divisional Engineer-I/ Eastern Railway/Malda.

A-Non Schedule items

B1-Schedule items

B2-Schedule items

B3-Schedule items

Item Breakup - A-Non Schedule items

Earth work in filling in embankment, trolley 10 refuges, level crossing approaches, platforms cum etc. with all classification of approved soil done in layer not exceeding 300 mm thick with breaking all size of clods filling of loose pocket and hand ramming as directed by engineer in charge complete in all respect. With Contractor's earth of approved quality and specification obtained from outside Rly earth with all lead lift as per site condition.

Wall paneling providing, fitting and fixing of Sqm 75 mm projected paneling , made up of 9 mm thick face ply and finished with 4mm thick veneer along with supporting frame work made up of aluminum tubular section along with all hardware and accessories as per requirement finished up to true line and level and ready to use condition including all materials, labour, T&Ps etc. all complete and as per the direction of architect (Only face area measurement shall be considered for calculation)

Supplying, fitting & fixing OW Acoustic Board Sqm (mineral Fibre Acoustic) of approved pattern and size 595mm X 595 mm with NRC value > 0.65 should be placed in the Grid module All complete as per drawing & direction of Engineer in-Charge. with 15mm thick OW Acoustic Board/Tiles Total 2508844.00

Item Breakup - B1-Schedule items

40 gms 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 300 531.8 159540 89 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in 21.2 panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. MALDA DIVISION-ENGINEERING/EASTERN RLY 21.2.1 Pre-laminated particle board with decorative Sqm 120 965.1 115812 90 lamination on one side and balancing lamination on other side Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 74 1019.8 75465.2 91 (weight not less than 10kg/sqm) Total 13263862.63

Item Breakup - B2-Schedule items

Item Breakup - B3-Schedule items

Providing hand packed dry brick flat flooring Sqm class designation 7.5: Flat Brick. Total 87536.36