SPL REPAIR TO BLDG NO T-24, T-28, T-29, T-30 AND T-31 AT JHANSI CANTT UNDER GE JHANSI

Amount

Dismantling Asbestos Cement Corrugated or Semicorrugate sheet in Roof covering complete all as specified and directed.

Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick AZ-150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted 0.5mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ-150 grade as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed works such as roof purlins, rafters, fillets ,ridges etc as in roof or ceiling complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description any sections not otherwise provided complete all as specified and directed.

Supply & Fixing mild steel (Fe 410-W, Gde E-250) as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat iron sections) complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 2 mm dia GI wire from roof/Slab/truss including wall/perimeter runner/channel of 15 mm size with and including 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm duly fixed in ceiling frame work including taking out old false ceiling any type any sections complete all as specified and directed.

Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc including removing rubbish from site complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc including removing rubbish from site complete all as specified and directed.

M&L for brick work with fly ash bricks (Old Size) straight or curved on plan exceeding 6 M mean radius built in cement sand mortar in 1:6 complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on brick work finished the surface even and fair complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:6) on brick work finished the surface even and fair complete all as specified and directed.

M&L for 5 mm thick rendering or plastering in CM (1:3) on concrete surface of ceiling finished even & smooth (without using extra cement) complete all as specifiied and directed.

M&L Plain Cement Concrete 1:2:4 type B-0 using 12.5 mm crushed stone aggregate as in Coping / benching/ bed plates/ fixing hold fast including form work if required complete all as specified and directed.

M&L for prepration of newly plastered surfaces of wall / ceiling and applying Two coats of (weather proof exterior paint) over a coat of exterior primer complete all as specified and directed.

M&L for prepration of newly plastered surfaces of walls and applying two coats of oil bound emulsion distemper (Acrylic) over one coat of cement primer complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed

M&L for Machine cut kota stone slab (550x550mm) flooring 18-20mm thick laid over 15mm thick cement sand screed bed in CM (1:4) as base laid and jointed with grey cement slurry mixed with pigment to match the colour or shade of the stone slab and rubbing and polishing (Mirror Polishing) including dismantling of existing stone/tiling/PCC with cement mortar bedding and removing rubbish from site off the premises complete all as specified & directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick laid over 10mm thick rendering in CM (1:3) on vertical surface laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab and rubbing and polishing (mirror polishing) including dismantling of existing stone/tiling/PCC with cement mortar bedding and removing rubbish from site off the premises complete all as specified & directed.

Blank in toto

M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection / hard standing or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compound grade 'A' including necessary formwork if required and including demolition of existing old cement concrete floors & removing rubbish from site complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-1 using 20 mm crushed stone aggregate as in floors laid in panels not more than 3 m in length and finishing the surface even and smooth without using extra cement including making joints 10mm wide to the full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compound grade 'A' including necessary formwork if required and including demolition of existing old cement concrete floors & removing rubbish from site complete all as specified and directed.

M & L for Complete removal of existing treatment on walls / roof projections including facia, cornices by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust loose paint etc by skilled labour & aaplying wall care putty @ 1 Kg (Un-diluted) per Sqm of average thickness 1 mm over prepared plastered surface complete all as specified and directed.

M&L for preparation old plastered surfaces of walls and applying two coats of oil bound distemper (Acrylic) on walls, white or tinted using applying over one coat of alkali resistant primer by roller complete all as specified and directed.

M&L for Prepration of old plastered surfaces of walls / ceilings and applying one coat of Apex paint (weather coat exterior paint) complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved colour or shade complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved colour or shade complete all as specified and directed.

M&L for coloured exterior heavy duty tiles 400mm x 400mm x 8-10 mm thick for path / pavement laid over & including 20 mm thick screed bed in CM 1:4; tiles as per sample kept in GE office complete all as specified and directed.

M&L for mild steel section as in door/windows chowkhats frame of steel gate of grade Fe-290 gde E-165 including all necessary machine wks i.e. cutting, welding, grinding if required complete all as specified and directed.

M&L for box type steel window and Ventilator with 80x40x1.25 mm MS tubular frame with side hung shutters (double shutters one glass and one gauze) without sash bars jointed together with and including MS grill using 12 mm square bar @ 10m mm C/C including box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note :- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.

S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exceeding 0.5 Sqm in each pane, duly fixed with oil putty or wooden bidding as required complete all as specifeid & directed.

S&F of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.4mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery complete all as specified and directed.

S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and pre-laminated on both sides (one face decorative colour laminates & other is off white) complete all as specified and directed.

S&F for mild steel plain black sheet 1 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles as required complete all as specified & directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each & removing from site complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm & not exceeding 4 Sqm each & removing from site complete all as specified and directed.

S&F 100mm long, medium weight stainless steel butt hinges fixed with steel screws complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised fixed with steel screws complete all as specified and directed.

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section fixed with steel screws complete all as specified and directed.

M&L for precast cement concrete jallies made with / in PCC 1:2:4 type B-0 using 12.5 crushed stone aggregate 25 mm thick (measured solid) set in CM 1:6 including all moulding etc complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors set and jointed in neat cement slurry and pointed in same colour to match laid over & including 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish from site off the premises complete all as specified & directed.

M&L for light shade Vitrified coloured tiles 8-10mm thick (Square or rectangular) polished, area of each tile not exceeding 0.38 Sqm laid in floors or skirting set and jointed in neat cement slurry and pointed in same colour to match over and including 15 mm thick screed bed or bedding layer in CM 1:6 including dismantling floor hearth or wall tiling including cement mortar beddingand removing rubbish from site off the premises complete all as specified & directed.

M&L for Glazed ceramic coloured tiles of size 350 mm x 250 mm x 7mm or 450x350x7mm thick, as in vertical surfaces such as dado, skirting set and jointed in neat cement slurry and pointed in same colour to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish from site off the premises complete all as specified & directed.

M&L for 15-18mm thick Granite stone (of any colour & type) work on table or kitchen top rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of colour pigment to match with colour or shade of granite stone including cutting chasing in brick work and half rounding of granite stone outer / exposed edges in front face of self laid over & including 15 mm thick screed bed in cement motar (1:4) including demolation of stone slabs any thickness including cement mortar bedding and removing rubbish from site off the premises complete all as specified & directed.

S&F in repairs pillar taps 15 mm dia cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with long screwed shanks and fly-nuts complete all specified and directed.

S&F in repairs 3-in-1 wall mixer including overhead Shower with 115mm long bend pipe on upper side connecting legs & wall flanges made of cast copper alloy chromium plated fancy type complete all as specified and directed.

S&F in repairs shower rose of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and including sweil type joints shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type complete all as specified & directed.

S&F in repairs fancy type long body bib cock 15 mm dia with wall flange made of cast copper alloy chromium plated complete all as specified and directed.

S&F in repairs hand shower (health faucet) with 10mm dia 100 mm long flexible tube, wall hook and wall flange made of cast copper alloy chromium plated fancy type complete all as specified and directed.

S&F in repairs angle stop cock 15 mm dia with wall flange made of cast copper alloy chromium plated complete all as specified and directed.

S&F in repairs bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type complete all as specified and directed.

S&F in repairs SS grating of square/round shape overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and including fixing with CM to floor / nahani traps etc complete all as specified and directed.

S&F in repairs towel rack 750 mm long and wall bracket made of cast copper alloy chromium plated complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long complete all as specified and directed.

S&F Sheet glass Corner assembly consisting of size (300mm x 300 mm) 5.5mm thick sheet with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repairs PVC connection 450 long 15mm dia PTMT (PVC) complete all as specified and directed.

S&F in repair of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white colour, with inlet ball valve, float and handle with and including wall bracket 32 mm dia PVC flush pipe and connected to squatting pattern / pedestal pattern water closet, including all joints and making good to the wall & floor complete all specified and directed.

S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface complete all as specified and directed.

S&F in replacement of 1st quality vitreous china wash hand basin, white flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size complete all as specified and directed.

Taking down eaves gutter and rain water pipes including all fitting any size and pattern & removing from site complete all as specified & directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/laid in trenches complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.

S & F in repairs PVC Floor trap of 75 mm outlet with CP grating including jointing to waste pipe complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed.

Cutting chases on walls, pining in, making good to facings where required and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sun-sheds, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good to disturbed surface exceed 20 cm girth in brick walls complete all specified and directed.

M&L for 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified & directed.

M&L for 20.mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified & directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making connections GI tubing inlet or outlet connection, with and including disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs & removing from site complete all as specified and directed.

S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in position complete all as specified and directed.

S&F of Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power point) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc and removing materials from site for taking credit and making good disturbed surfaces of walls / floors etc complete all as specified and directed.

M&L for point wiring for modular fittings complete with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS: 694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS: 9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm (OD), concealed in wall/ floor etc including provision of modular cover plates with frames and 1.50 Sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly complete all as specified and directed. Note : - The rates of chasing/cutting & making goods to disturbed surface shall be included in the unit quoted rate) :-

One light point/ceiling fan/exhaust fan point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

All as per srl item No. 78 here-in-before but with 2.5 Sq mm FRLSH copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board ---- ditto---- complete.

M&L for submain wiring alongwith earth wire 2 runs x 6 Sqmm + 1 run x 6 Sqmm with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit ISI Marked conforming to IS: 9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including taking down old submain wiring any type alongwith conduit complete all as specified and directed. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

M&L for submain wiring alongwith earth wire 2 runs x 2.5 Sqmm + 1 run x 2.5 Sqmm with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit ISI Marked conforming to IS: 9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including taking down old submain wiring any type alongwith conduit complete all as specified and directed. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

S&F of Modular switch 1 way 6Amp, 1 module 240Volt, 50Hz complete all as specified and directed.

S&F electronic Fan regulator, 120Watt having 2 module, 240Volt, 50Hz ISI marked with valid CML complete all as specified and directed.

S&F of Modular Socket, 6Amp - 2/3 pin combined 2 module 240Volt, 50Hz complete all as specified and directed.

S&F of Modular switch 1 way 16Amp, 1 module 240Volt, 50Hz complete all as specified and directed.

S&F of Modular Socket 6/16Amp - 2/3 pin combined 2 module 240Volt, 50Hz complete all as specified and directed.

S&F angle holder, metal cased, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and directed.

S&F Ceiling rose, three terminals, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and directed.

S&F LED Tube light fitting batten type 20Watt, 230Volt, efficiency 120 Lumens per watt, colour temperature 6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP-20, THDv with in 5 % and THDi (8-10%) and integrated Electronic driver complete with al accessories internally Pre-wired and including connecting with two Core twisted flexible copper conductor wire of suitable size from celling rose complete all as specified and directed. Notes:- (i) The rate of three/two core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account. (ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase. (iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits.

S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 Volt AC recessed type Cool white with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling/grid ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed by GE.

Supply and fixing in replacement of LED bulkhead luminaire 10Watt in die-cast aluminium alloy/ PVC body heat resistant prismatic glass cover, with specially designed gasket for minimum IP-55 degree of protection complete all as specified and directed.

Supply and fix LED building security light fitting 35 watts, Luman efficacy of LED 140 lm/W, PF>0.95 THD<10%, colour temperature 6500K CRI > 7, system luman not less then 2600 lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP-65 protection and impact resistant of IK-07 etc and all accessories prewired complete including mounting bracket of GI Pipe 40mm inner dia light grade of reqd length and shape including bending, forging or welding and fixing witg suitable bolts and nuts with washers, including connecting with PVC insulated multi-standered cooper flexible cable of size 0.5sqmm 3 core form celling rose to fitting complete all as specified and directed. Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account. (ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase. (iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits.

Supply and fixing LED post top lantern light fitting for 70 Watt with aluminium housing, clear acrylic diffuser, cast aluminium pole-cap complete with accessories including mounting in light grade GI pipe suitable for OD of 75 mm pipe complete with all accessories complete all as directed.

Supply & fixing of factory wired integral LED flood light OPTIBAY Highbay luminaries with PDC housing, round shaped LED highbay luminaire with PC Diffuser & 120 Im/w efficacy, equipped with 4kv in-built and 10 kv external surge protection IP-66 protection rating complete Bajaj cat part No: OPTIBAY 80W WH NB PC SD or equivalent models in Crompton/Philips/ Wipro/Havells.

S&F of ceiling fans complete with blades, down rods, (with remote) and accessories, 230 Volt, 1200 mm sweep Min air delivery 210 CFM with service value more than 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing air circulator fan 230 volts single phase oscillating type 450 mm sweep copper wound motor suitable for wall mounting with 3 No of blades minimum air delivery of 9000 (CMM), speed of 1440(RPM), 50 Hz complete all as specified and directed.

S&F in repair of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 Volt, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP-43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.

S&F in repair of MCB distribution board, TPN, 4 way, 415 Volt, 3 phase, AC in sheet steel powder painted enclosure double door type with minimum IP-43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Taking down unserviceavle Sheet metal box & MCB DB SPN/ MCB's of any make/capacity complete all as specified and directed.

Supply and fixing MCB distribution board, SPN, 8 way 230 Volt in sheet steel powder painted enclosure double door type with IP-43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply and fixing MCB distribution board, SPN, 4 way 230 Volt in sheet steel powder painted enclosure double door type with IP-43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCBs shall be measured and paid separately.

S&F MCCB, Four Pole 63Amp, with breaking capacity 16 KA, adjustable thermal and fixed magnetic type, ics=100%icu, 415 volt including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-In-Charge.

S&F MCB TPN 63Amp, 415 Volt, 50 Hz, with breaking capacity 10 KA, C series complete all as specified and directed.

S& F MCB SPN 40-63 Amp, 240 Volt with breaking capacity 10 KA, 'C' series complete all as specified and directed.

S& F MCB SP 6-32 Amp, 240 Volt with breaking capacity 10 KA, 'C' series complete all as specified and directed.

Supply & laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 35 sq mm 3.5 core ISI Marked as per IS 7098(Part 1) including connecting on LT panel based with suitable lugs, glands etc including taking down existing old damaged cable of any description & removing from site complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for laying of GI Pipe and getting out in any type of soil complete all as specified and directed.Engineer-in-Charge.

Returning, filling in, including leveling, watering and well ramming in layers not exceeding 25 cm depth complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed.

Taking down old U/S earthing and M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point complete all as shown in electircal plate No. 3 of SSR Part-I (2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix Type C-1, pit 50mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe 20 mm dia GI pipes, wire mesh, 20 mm dia GI pipe as protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

Supply and fixing aluminium strip 25 x 3.15mm with saddles and fixing screws, insulators rawal plugs etc for conductor for roof and fixed on wall upto test point complete all as specified & directed.

Supply & fixing single pointed air termination aluminium rod 12mm dia, 300 mm Long complete all as specifeid and directed.

M&L for lightening conductor assembly made out of GI pipe light grade of size 40 mm bore along with welded flange, fixed on the roof with drilling/making hole and provide rubber washer 6mm thick of suitable size and connect to air termination & connector for earth strip duly fixed with necessary nuts bolts & washers in PCC 1:3:6 type C1, of size 20cm x 20 cm x20 cm complete all as directed. Note :- GI pipe 40mm (1 RM for each), PCC & air temination shall be measured & paid separately under relevant items

Supply and fixing galvanized iron strip 32 x 6mm fixed with saddles & fixing screws, PVC dash fastners, insulators fixed from test point to earth on walls or burried in ground / drawn into hume pipe complete all as specified and directed.

M&L GI pipe 40mm dia Medium grade for GI Strip Protection and fixed for air termination point complete.

M&L for test point terminal block made of gun metal or phosphorous bronge 75 x 75 x 25mm of 6mm thickness drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head brass screws including box of size 90 x 90 x 90mm made of 1.6mm plain sheet and screwed to wall for protection of test point completed all as specified.

Supply & Fixing of epoxy insulator of required size with two nos hole each on both end for fixing properly with fastner, nuts & bolts on wall & roof of buildings for separated earthing stirp from building complete all as specified and directed.

M&L for earthing complete with galvanized steel earth electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with the top edge not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead, GI strip 32x6 mm dia by means of bolts, nuts, chock nuts and washers and other end connected to earthing test point in 40mm GI medium grade pipe for prtection including funnel, watering pipe of 20 mm bore (Light Grade) GI pipe wire mesh, charcoal or coke and common salt in alternate layers all around the earth electrode compacted thickness 15 cm, earthing pit in PCC (1:3:6) type C1, 50 mm thick pre-cast RCC cover slab (1:2:4) type B1 set in CM (1:4), reinforced with 8 mm dia TMT bars @ 15 cm c/c and suitable handle of 10 mm dia MS round bars including earth work in excavation in soft/loose soil, desposal of soil not exceeding 50 mtr complete and testing on completion complete all as shown in electrical plate No-5 of MES schedule, part-I complete all as specified and directed. NOTE :- Rate quoted by the tenderer shall be deemed to include for the following provisions:- (i) Item includes the cost of 7.5 m GI pipe for protection of GI strip (ii) Item includes the cost of 7.5 m of GI strip (iii) PCC pit shall be provided at least 500 mm away from pit and not on the earth pit itself and the extra cost of additional length of watering pipe bends, elbow etc shall be deemed included in the unit rate.

ADARSH ENTERPRISES (BID ID -3471143)

M/S S K AGARWAL (BID ID -3474161)

M/s Jagdish Chandra Arora (BID ID -3473301)

M/sDaljeet singh keer (BID ID -3474281)

HARNAM SINGH ANIL SINGH (BID ID -3474673)

m/s ramesh saran agarwal (BID ID -3474455)

M/S Ritu Tandon (BID ID -3474456)

FTH TRADERS (BID ID -3474171)

M/S SHIVA TRADERS (BID ID -3474589)

S GOURAV PRAKASH ENTERPRISES (BID ID -3473797)

Flint India (BID ID -3472775)