Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAccepted-Finance | ₹2.6 L | L1 | Accepted-Finance 01st Position |
| 2 | L2₹2.9 L+₹23,500 (8.97%)Rejected-Finance RANGAT | ₹2.9 L+₹23,500 (8.97%) | L2 | Rejected-Finance 02nd Position |
| Sl No | Description | Qty | Unit | M KARIKALAN L2 | D. KARTHIKA L1 |
|---|---|---|---|---|---|
| 1.00Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||||
| 1.10 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 2 | cum | 7,300 ₹14,600 Lowest | 7,300 ₹14,600 Lowest |
| 2.00 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | 6 | sqm | 2,450 ₹14,700 Lowest | 2,500 ₹15,000 |
| 3.00Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 3.10 | Electric resistance or induction butt welded tubes | 20 | kg | 250 ₹5,000 Lowest | 350 ₹7,000 |
| 4.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 40 | sqm | 1,500 ₹60,000 | 1,300 ₹52,000 Lowest |
| 5.00Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | |||||
| 5.10 | Ridges plain (500- 600mm) | 5 | metre | 1,500 ₹7,500 | 1,200 ₹6,000 Lowest |
| 6.00 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | 50 | sqm | 150 ₹7,500 | 130 ₹6,500 Lowest |
| 7.00Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | |||||
Tender Value
₹2.9 L
EMD Value
₹5,740
Closing Date
1 Jun 2026, 3:00 pmClosed
General Manager (CW)
General Manager (CW) Vikas Bhawan, ANIIDCO
Repair and maintenance of Milk Chilling Centre at Navhagram, Diglipur.
2026_ANCVL_22543_3
ANIIDCO/CW/25-26/TD-30
Open Tender
Civil Works - Bridges
Item Rate
30 days
Navhagram, Diglipur.
as per tender documents
6 documents required · 6 mandatory
₹0
₹5,740
17 Jun 2026
15 May 2026
2 Jun 2026
16 May 2026
1 Jun 2026
25 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||||
| 1.1 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 2 | cum | 8,340.85 | ₹16,681.7 |
| 2 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | 6 | sqm | 749.3 | ₹4,495.8 |
| 3Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 3.1 | Electric resistance or induction butt welded tubes | 20 | kg | 194.4 | ₹3,888 |
| 4 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 40 | sqm | 738.65 | ₹29,546 |
| 5Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | |||||
| 5.1 | Ridges plain (500- 600mm) | 5 | metre | 532.35 | ₹2,661.75 |
| 6 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | 50 | sqm | 262.7 | ₹13,135 |
| 7Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | |||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
tendocNav3.pdf
Tender Documents • 0.83 MB
TendernoticeNG.pdf
Other Documents • 0.41 MB
BOQ_24451.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .