SCRAPING AND PAINTING OF ROOF AT LEBONG AND UPGRADATION OF TOILETS OF JCO AND OR AT JALAPAHAR UNDER AGE I DARJEELING

Amount

Dismantling steel sheeting (corrugated or semi-corrugated) sheets in roof covering complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J-type or cranked hook bolts, complete all as specified and as directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J-type or cranked hook bolts, complete all as specified and as directed by Engineer-in-charge.

Dismantling timber scantling 40 Sqcm & over in section in any position as in unframed work and removing material from site of work, complete all as specified and as directed by Engineer-in-charge.

M&L for 2nd class hard wood as in scantlings timber fixed work clean sawn, complete all as specified and as directed by Engineer-in-charge.

Dismantling boarding of any description fixed in any position with nails, complete all as specified and as directed by Engineer-in-charge.

S&F 20mm thick 2nd class hardwood boarding work fixed with nails planed one side with butt joint as in roofing and eaves board, complete all as specified and as directed by Engineer-in-charge.

S&F 25 mm thick 2nd class hardwood weather boarding planed one side with butt joints as in roof roof, ceilings, partitions, facia, barge etc, complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with one coat of creosote oil, complete all as specified and as directed by Engineer-in-charge.

M&L preparation of new wooden surface of description and not otherwise described and exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge.

M&L for one coat of anti-corrosive synthetic enamel paint to old steel surfaces as on roof of any description over 10 cm width and girth, otherwise described including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.

M&L for one coats of anti-corrosive synthetic enamel paint over one coat of zinc chrome or red oxide primer to old steel surfaces as on roof of any description over 10 cm width and girth, otherwise described including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.

M&L for two coats of anti-corrosive synthetic enamel paint to old steel surfaces as on roof of any description over 10 cm width and girth, otherwise described including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.

M&L for applying two coats of anti-corrosive synthetic enamel paint over one coat of zinc chrome or red oxide primer to old steel surfaces as on roof of any description over 10 cm width and girth, otherwise described including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster of any description including racking out joints, complete all as specified and as directed by Engineer-in-charge.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface (Internally) including finishing even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge.

Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening primer, complete all as per specified and as directed by Engineer-in-charge.

M&L for 1mm thick wall care putty on wall, complete all as per specified and as directed by Engineer-in-charge.

Dismantling floors, hearth or wall tilling including cememt mortar beding (but not backing), and rubbish off the premises, complete all as per specified and as directed by Engineer-in-charge.

S&F Glazed ceramic coloured tiles of 450x300x7mm thick tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, over backing coat of 10 mm thick in CM 1:3, complete all as per specified and as directed by Engineer-in-charge.

S&F coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as per specified and as directed by Engineer-in-charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillers etc but excluding ashlar facings, dressed stonework and precast, complete all as per specified and as directed by Engineer-in-charge.

M&L brick work with Fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.

M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 15mm dia steel tubing and connection for removal from site, complete all as per specified and as directed by Engineer-in-charge.

S&F galvanised tubes medium grade 15mm dia with all fittings concealed type and fixed to walls and ceiling or laid in floors, complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 20mm dia steel tubing and connection for removal from site, complete all as per specified and as directed by Engineer-in-charge.

S&F galvanised tubes medium grade 20mm dia with all fittings concealed type and fixed complete to walls and ceiling or laid in floorsfrom site, complete all as per specified and as directed by Engineer-in-charge.

Cutting chase, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting n exc 10cm girth, complete all as per specified and as directed by Engineer-in-charge.

S&F 15 mm bore Chromium plated fancy type bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.

S&F Chromium plated fancy type 15 mm bore stop valve cast copper alloy, with crutch or butterfly handle, screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-charge.

S&F PVC connection 15mm dia size with PTMT nuts of length 600mm, complete all as specified and as directed by Engineer-in-charge.

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and as directed by Engineer-in-charge.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) with seat cover white with 'P' or 'S' trap, including and flushing pipe etc complete including making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing specifications as specified (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed by Engineer-in-charge.

S&F chromimum plated health faucet (Easy flex Chrome Hose, Handset, ABS Body & Bracket) shower with CP flexible pipe up 15 mm bore with 1 m long Easy Flex tube in chrome finish, complete all as per specified and as directed by Engineer-in-charge.

S&F PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe, complete all as per specified and as directed by Engineer-in-charge.

S&F Vitreous china wash basin white, flat back, size 450 X 300 mm excluding tap waste but incl bracket and incl cutting for and pinning in ends of brackets but exclusive of supply waste pipe, complete all as per specified and as directed by Engineer-in-charge.

M&L waste fittings 32mm dia brass chromium plated for glazed ware basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end, complete all as per specified and as directed by Engineer-in-charge.

S&F flexible collapsible PVC waste/discharge pipe for sink and wash hand basin 32/31mm dia, length not less than 75 cm, connected to waste coupling/fittings complete all as per specified and as directed by Engineer-in-charge.

S&F pillar taps, 15mm dia cast copper Alloy with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as per specified and as directed by Engineer-in-charge.

S&F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge.

S&F Wall Mixer with non-telephonic chromium plated cast copper with approved make CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia, complete all as per specified and as directed by Engineer-in-charge.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as per specified and as directed by Engineer-in-charge.

S&F 75 mm dia PVC (SWR) floor trap plain with grating incl jointing with solvent cement, complete all as per specified and as directed by Engineer-in-charge.

Taking down chowkats or frame exc 1.5 sqm but not exc 4 sqm each with shutter (without taking off shutter from frame) all as specified and removing from site complete all as per specified and as directed by Engineer-in-charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening complete all as per specified and as directed by Engineer-in-charge.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as per specified and as directed by Engineer-in-charge.

M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as per specified and as directed by Engineer-in-charge.

S&F 4.80mm thick sheet glass ordinary quality and glazing with oil putty and wooden beads in square not exc 0.50sqm in each pane, complete all as per specified and as directed by Engineer-in-charge.

S&F 75 mm long medium weight, cold rolled mild steel butt hinges, complete all as specified and as directed by Engineer-in-charge.

S&F 125 mm size aluminium handle cast type anodised, complete all as specified and as directed by Engineer-in-charge.

S&F 125 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer-in-charge.

Material and Labour for cutting into existing manholes for connecting new drains, making good to pipe and plastering the disturbed portions in CM 1:3 to match with surround surfaces, cutting out existing benching and forming branch channel (1/2 round or ¾ round section) in cement concrete 1:2:4 type B-1 finished smooth and reforming benching as required for 100/110 mm bore pipe, complete all as specified and as directed by Engineer-in-charge.

Cleaning of block drain pipe (SGSW/hume pipe) upto 150mm dia by rodding from manholes and well flushing with water after cleaning the same all as required and including disposing off the deposited sludge , etc inside pipes to a distance exc 50 m & n.exc 200 mtr burried under ground (minimum 30cm below ground level) including necessary excavating of pitsin soft/ioose soil and returning filling in including sprinkling of bleaching powder @ 0.20 Kg/Sqm and dressing of surplus soil around slope, complete all as specified and as directed by Engineer-in-charge.

HIRA SINGH

TSHERING WANGYAL BHUTIA

Darjeeling Enterprises

KWOK YING CHIU

JALAPAHAR HARDWARE

BHASKAR PRADHAN

SANJAY KAUSHIK

REEMA TAMANG AND SONS