Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹27.9 L
EMD Value
₹55,800
Closing Date
22 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Civil , Electrical Works Pertaining Up-Gradation of FM , CL Group Room No 62, Design Building, ARDC.
10022
TENDER NOTICE/NCP/29/24-25/7
Works
Contract Section Civil-FMD-Bangalore
₹0
₹55,800
22 Oct 2024
24 Sept 2024
24 Sept 2024
22 Oct 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION
NAME OF THE WORK: Civil & Electrical Works Pertaining Up-Gradation of FM & CL Group (Room No 62), Design Building, ARDC. CONTRACT NO. HAL/FMD/R-60/24-25
Name of the Contractor :
Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any.
Part 'A' - Civil Works
1 Providing and fixing powder coated aluminium work for fixed portions of doors, windows (3 track / 2 track windows as instructed by EIC), ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately): Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) . The vendor has to make good the false ceiling, if removed for fixing the Al partition and also provide necessary supports with ther exisitng ceiling. 460.00 Kgs 0.00
2 Providing and fixing powder coated aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required of doors, windows (3 track/2 track windows as instructed by EIC), ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) . 40.00 Kgs 0.00
3 Providing and fixing 12mm thick prelaminated particle board with decorative lamination on both sides. flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, etc., complete as per architectural drawings and directions of Engineer-in-Charge. 40.00 Sq m 0.00
4 Providing and fixing glazing as glass/louvers/panes, etc., in aluminium door, window, ventilator shutters and partitions, etc., with EPDM rubber / neoprene gasket, etc., complete as per the architectural drawings and the directions of Engineer-in-Charge. With float glass panes(plain/pin head/frosted) of 4mm thickness (weight not less than 10Kgs / Sq m) 85.00 Sq m 0.00
5 Dismantling / removing tile work (for thickness of tiles 10mm to 25mm) of in floors and in walls laid in cement mortar after disconnecting the electrical service and AC lines if any, including stacking material complete as directed by Engineer-in-Charge. 6.00 Sq m 0.00
6 Providing and laying Double charge vitrified tile polished finish of size of size [600 X 600]mm as indicated below for Paper Joint in different sizes (Thickness to be sepcified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.30Kgs / Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge. 250.00 Sq m 0.00
7 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35Kgs and door width upto 700mm), with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Nos 0.00
8 Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by the Engineer-in-Charge. 5.00 Cu m 0.00
9 Dismantling aluminium / Gypsum partitions, doors, sliding doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50meters lead, etc., all complete as directed by Engineer-in-Charge. 265.00 Sq m 0.00
10 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50metres lead, etc., all complete as directed by Engineer-in-Charge. 6.00 Sq m 0.00
11 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-Charge, beyond 50m initial lead, and upto a distance of 10km for all leads including all lifts involved and lime, moorum, building rubbish, etc., all complete as directed by Engineer-in-Charge. 5.00 Cu m 0.00
12 Providing & Fixing in true horizontal level false ceiling grid of prelude XL 24mm systems manufactured by Armstrong world industries US/UK or any approved equivalent make using hot dipped Galvanized steel section, exposed surface chemically cleaned capping prefinished in baked polyester paint, main tee of size (24 x 32 x 0.27)mm at every 1200mm c/c max mandatory stitched cross t of size (24 x 27 x 0.25)mm at every 1200mm c/c max and cross 'T' of size (24 x 25 x 0.254)mm at every 600mm centre to centre max and (19 x 19 x 0.35)mm, (19 x 19 x 0.35)mm wall angle formed grid, having around the wall to form a grid of size (600 x 600)mm and suspending the grid using pre straightened GI wires laying Fine Fissured Tegular edge ceiling tiles at every 1200mm intervals at the main I and providing and fixing (Fine fissured Tegular Edge) manufactured by M/s Armstrong of size (600 x 600 x 16)mm over the WRC 0.5 0, light reflection of more than 80% WT Thermal conductivity K=0.052 to 0.057W/mok, humidity resistance of 90% having fine performance Class 0/ class I (BS 476), surface having random fissured with three coats of protective paint over the grid, etc., all complete as directed by Engineer-in-Charge. The work inclusive of making provision for the cut outs for the lights and other fixtures and neatly finishing the edges as per the instructions of the EIC. 240.00 Sq m 0.00
13 Removing / Dismantling the existing textile covering / floor carpet / PVC flooring and making the floor neat for fixing vitrified tiles, etc., all complete as directed by Engineer-in-Charge. 30.00 Sq m 0.00
14 Dismantling of existing Aluminium frame with partition, board and glass in any description and in any position for members like frames, doors, windows, ventilators, slidingh doors, etc., at all levels including returning of serviceable materials to maintenance department store and cleaning of demolished debries away from site, etc., all complete as directed by Engineer-in-Charge. 25.00 Sq m 0.00
15 Altering, Refixing of exsiting Aluminium frame with partition, board glass in any description and in any position for members like frames, doors, windows, ventilators, sliding doors, etc., at all levels including the cost of required accessories such as clips, beadings, etc., all complete as directed by Engineer-in-Charge. 25.00 Sq m 0.00
16 Supplying and Fixing of "SUNLOCK / PRESTER / HILUX or other equivalent" delux model 100mm width fabric washable scotch guard vertical blinds using powder coated aluminium channel and fittings with complete accessories including capping on both sides, etc., all complete as directed by the Engineer-In-Charge 80.00 Sq m 0.00
17 Plastering to ceiling with 12mm thick on the rough side with cemnet mortor (1:4) including leveling, curing and making the level smooth and at all heights and execute the work, etc., all complete as directed by the Engineer-In-Charge 65.00 Sq m 0.00
18 Painting old plastered interiors surfaces with 2 coats of low VOC with less than 50gms / Ltr premium plastic emulsion with acrylic base, of approved make, colour, shade, tint and pattern at all levels, over a water thinnable priming coat with cement primer including preparation of surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even by applying putty in patches and repairs whereved required to achieve an even and msooth surface, with all necessary scaffolidng and safety arrangements like safe working platform, safety harness, PPEs, etc., all complete as directed by the Engineer-In-Charge 80.00 Sq m 0.00
19 Providing and fixing aluminium sliding door bolts (aldrop) of [250 x16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., all complete as directed by the Engineer-In-Charge. 12.00 Nos 0.00
20 Providing and fixing aluminium handles of 125mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as directed by the Engineer-In-Charge. 12.00 Nos 0.00
21 Providing and fixing aluminium tower bolts of size [250 X 10]mm , ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws, etc., all complete as directed by the Engineer-In-Charge. 12.00 Nos 0.00
22 Cutting of grooves through concrete/mortar bedding, tiled flooring or any other flooring surface of width of more than 150cm and to any depth as directed by EIC to ensure routing of cables / conduits including cleaning of the loose mortar / girt / sand upto any depth, etc., all complete as directed by the Engineer-In-Charge. 175.00 R m 0.00
Sub-Total of Part 'A' - Civil Works (Excluding GST) 0.00
Part 'B' - Electrical Works
Supply, Installation, Testing & Commissioning of Following VTPN DB
1 Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:
a) 8 way (4+24) Double door VTPN MCCB DB 1.00 No 0.00
b) 250 A, 415V 36KA, FP MCCB 1.00 No 0.00
c) 63 A, 415V 25KA, TP MCCB 8.00 Nos 0.00
Supply, Installation, Testing & Commissioning of Following Horizontal TPN DB
2 Supply, fixing, testing & commissioning of the following way Horizontal Type Three Pole Neutral,Sheet Steel, MCB DB, 415V, on surface/recessed , complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc., as required/directed by Engineer-in-charge and comprising the following as detailed below:
a) 4 way (4+12) Double door TPN MCB DB 1.00 No 0.00
b) 8 way (4+24) Double door TPN MCB DB 4.00 Nos 0.00
3 Supply, Installation, Testing & Commissioning of Following MCBs in DBs
a) 63 amps. ratings, 4P MCB, "C" curve, 10 KA breaking capacity. 5.00 Nos 0.00
b) (32A-20A), ratings, 240V, DP MCB, "C" curve, 10 KA breaking capacity. 30.00 Nos 0.00
c) (10A-16A) ratings, SP MCB, "C" curve, 10 KA breaking capacity. 48.00 Nos 0.00
4 SUPPLY AND LAYING OF LT CABLES
Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of following size XLPE insulated Aluminium (Al) conductor 1100V gr., earthed Armoured (Arm)U.G cables as directed and as per technical specification and as detailed below. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.)
4.1 3.5 CX 95 Sqmm Aluminium armoured conductor 50.00 Mtrs 0.00
4.2 3.5 C X 35 Sqmm Aluminium armoured conductor 15.00 Mtrs 0.00
4.3 4 CX16 Sqmm Aluminium armoured conductor 150.00 Mtrs 0.00
4.4 Laying & fixing of one number XLPE armoured UG cable of 1.1 KV grade of following size on cable tray as required
c) 4C x 16 Sqmm. Al Armoured LT cable. 150.00 Mtrs 0.00
4.5 CABLE TRAY Supplying and installaing of following size perforated painted with powder coating MS Cable trays with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with MS suspenders including bolts&nuts,painting suspenders etc as required.
150mm width x 50mm depth x 1.6mm thickness 50.00 Mtrs 0.00
5 END TERMINATIONS
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
a) 3.5C x 95 Sqmm. Al Armoured LT cable. 4.00 Nos 0.00
b) 3.5C x 35 Sqmm. Al Armoured LT cable. 4.00 Nos 0.00
c) 4C x 16 Sqmm. Al Armoured LT cable. 12.00 Nos 0.00
6 AC Plug & Socket and WIRING
a) Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 6.00 Nos 0.00
b) AC Wiring : Wiring for 20 Amps Industrial Socket : Supply & drawing of AC circuit wiring by using 6.0 Sq.mm x 2 Runs + 6 Sq.mm x 1 Run for earthing Cu. Multistrand wire drawn through suitable size PVC conduit pipe as specified in all respect as directed by EIC 200.00 Mtrs 0.00
7 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
a) 20MM PVC Conduit 200.00 Mtrs 0.00
b) 25MM PVC Conduit 500.00 Mtrs 0.00
c) 32MM PVC Conduit 100.00 Mtrs 0.00
d) 40MM PVC Conduit 300.00 Mtrs 0.00
e) 20MM PVC Flexible conduit 100.00 Mtrs 0.00
8 Submain Wiring for UPS Power Points
a) Wiring for circuit/submain wiring alongwith earthwire with 2X1.5Sqmm + 1x1.5Sqmm sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC Conduit as required 300.00 Mtrs 0.00
9 Submain Wiring for Raw Power Points
a) Wiring for circuit/submain wiring alongwith earthwire with 2X2.5Sqmm + 1x2.5Sqmm sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC Conduit as required 300.00 Mtrs 0.00
10 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
a) 3 Module 32.00 Nos 0.00
b) 8 Module 30.00 Nos 0.00
11 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
a) 5/6A Switch 60.00 Nos 0.00
b) 15/16A Switch 32.00 Nos 0.00
c) 3 pin 5/6 socket outlet 90.00 Nos 0.00
d) 6 pin 15/16A socket outlet 32.00 Nos 0.00
e) Supplying and fixing of Telephone socket outlet on the existing modular plate & switch box including connections but excluding modular plate & box etc. as required. 20.00 Nos 0.00
12 20 pair krone type telephone connector Junction Box :
a Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 20 pair capacity krone type telephone connector junction box including krone connector with necessary mounting frame housed in suitable size FRP/SMC box with hinged lockable cover complete in all respects. 1.00 Nos 0.00
13 Telephone Wiring
a Supply and drawing 4 pair 0.5mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in existing PVC Conduit as required 130.00 Mtrs 0.00
14 Metal junction box
a Supply & fixing of suitable size Metal Junction boxes with top & bottom cover plate on floor to interconnect the PVC conduits (Network & Power Cables) as required at site complete with necessary hardwares etc., complete in all respects and as directed by EIC. 150.00 Nos 0.00
a) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 1.00 No 0.00
b) Supply & providing earth stations using 600x600x3.15mm thick copper plate electrode complete at 2.5 mtr. below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2runs of 50x6 mm(300mm) copper strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender documents & as per IS 3043 complete in all respects[For Transformer neutral earthing]. 1.00 No 0.00
c) Supply, fixing & connecting the 25mmX5mm size Copper strip on wall / clamping to the existing duct wall / laying in cable tray/ laying 2 ft. below the ground level with necessary excavation, concrete cutting & re-concreting, refilling, consolidation & levelling of soil after laying for interconnection between the earth pits and transformer neutral as directed by Engineer-in-charge. Note:- Excavation, concrete cutting & re-concreting will be measured separately. 150.00 Mtrs 0.00
d) Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm) as per CPWD specification and as directed by Engineer In Charge. 75.00 Mtrs 0.00
16 DISMANTLING OLD PANELS
Disconnecting/dismantling & removal of the existing following LT panels along with its accessories fixed/mounted on floor/wall as-is-basis without any damage and handing over the same to the Engineer-in-charge at Plant Maintenance office, ARDC Division including loading, transportation, unloading etc., complete in all respects to a distance not exceeding 3 km inside ARDC factory. The scope also includes disconnecting the existing cables from panel, complete in all respects and as directed by the engineer-in-charge.
a Disconnecting & Dismantling of LT Panel FM Hall - With 100A SFU Incomer (3.5C X 50Sqmm incoming cable) and 4 Nos of 63A Outgoing SFU and shifting the removed items to scrap yard,ARDC 1.00 LS 0.00
b Disconnecting & Dismantling Horizontal TPN DBs with 63A incomer (Approx Qty:04 Nos,) and shifting the removed items to scrap yard,ARDC 1.00 LS 0.00
a Demolishing cement concrete manually/ by mechanical means including disposal of material as per direction of Engineer - in - charge. 10.00 Cu.Mtrs 0.00
Sub-Total of Part 'B' - Electrical Works (Excluding GST) 0.00
Total of Part 'A' + 'B' (Excluding GST) 0.00
Add 18% GST 0.00
Grand Total (Including GST) 0.00
HINDUSTAN AERONAUTICS LIMITED
Facilities Management Division
Pre-Qulification Profile (To Be uploaded along with Part A)
Tender Ref No. or Contract No.: HAL/FMD/R-60/24-25
Name of Work: Civil & Electrical Works Pertaining Up-Gradation of FM & CL Group (Room No 62), Design Building, ARDC.
Estimated Amount in Rs.: 2790000
Tender Notice Date : 12.09.2024
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company
2 Type of ownership PlsEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution
4 Address for correspondence: Pls Enter Address
5 (a) PAN No.: Pls Enter Pan NO
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code 3 #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 I.T Returns for past 03 years 999999 5 J 6
2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
9 Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2
2022- 2023 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 837000.00
Avg Annual Turnover criteria is not met 10000000 1
10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed
ESI Registration No/. with proof if any Remarks if any
PF Registration No. with proof if any
11 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Name of the Bank
Type of Account
12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal
Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000
Date of Issue 200000 40000
Value in Rs. 200001 150000
Solvency value is NOT as per NIT
13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 1116000 500001 250000
Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000
Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: Please enter Details for Work No 1 2000000 500000
Completed value of Work in Rs. 2000001 1000000
Date of Commencement of Work 4000000 1000000
Date of Actual Completion of Work: 4000001 2000000
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Pls Enter Details for Work No II
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work: work done
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555
Brief Description of Work: Pls Enter Details for Work No III #REF!
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work:
14 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Pls Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
15 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
16 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN29.pdf
TENDER_DOCUMENT • 1.33 MB
Amendment.pdf
TENDER_DOCUMENT • 0.09 MB
60PBF.xlsm
TENDER_DOCUMENT • 0.04 MB
60PB.pdf
TENDER_DOCUMENT • 0.37 MB
60Undertaking.pdf
TENDER_DOCUMENT • 0.57 MB
60TB.pdf
TENDER_DOCUMENT • 3.35 MB
60PQ.pdf
TENDER_DOCUMENT • 0.21 MB
ElectricalTenderDrawing02.pdf
TENDER_DOCUMENT • 0.47 MB
ElectricalTenderDrawing01.pdf
TENDER_DOCUMENT • 0.42 MB
60ECSForm.pdf
TENDER_DOCUMENT • 0.48 MB
60PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
60Checklist.pdf
TENDER_DOCUMENT • 0.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .