SPECIAL REPAIRS TO WASHROOMS AND TOILETS IN BUILDING NO. P-202 AND PROVISION OF CERTAIN MINOR WORKS AT AF STATION YELAHANKA

Amount

Demolition of cement concrete (un reinforced) in ground floors (including tiles/floor finishes etc) and pavings n exc 15 cm thickness (Below or above ground level)

M&L for 40mm thick PCC 1:2:4 Type B1 using 20mm graded stone aggregate as in sub floors, floors etc complete all as directed.

M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Non-Skid coloured ceramic tiles of size 400mm x 400mm,10mm thick (square/rectangular), polished, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Make : Digital Havana Oilve (Dark-M) of Kajaria or its Equivalent.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement to receive wall finishes such as dados.

M&L for Non-Skid coloured ceramic tiles of size 400mmx800mm,10mm thick (square/rectangular) for work on vertical surfaces like dado and skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Make : Digital Havana Oilve (Dark/Light-M) of Kajaria or its equivalent as approved by GE.

M&L for rendering 15mm thick in CM 1:3 mixed with water proofing compound on concrete slab & sides of sunken portion, fair finished even and smooth without using extra cement.

M&L for applying evenly a coat of blown grade bitumen 85/25 on plastered surfaces of sunken floor at the rate of 1.50 kg/Sqm and blinding with clean dry sand @ 0.05 cu. m. per sqm.

Supply only liquid water proofing compound

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for half brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar 1:4 all as specified

Taking down cement or cement lime plaster of any description on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each all as directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each all as directed

Resecuring or easing & adjusting of shutters of any description exc 1 sqm and n exc 2 sqm each without taking down

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as directed.

S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, complete all as specified and as directed.

S&F 1st class hard wood (Teak wood) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, including mirror polishing complete all as specified and directed.

S&F 40mm thick Factory made 1st class hard wood (Teak wood) solid construction door shutters, including mirror polishing complete all as specified and directed. Make:Maxon Doors or its equivalent as approved by GE.

S&F Aluminium frame (powder coated) for doors, windows, ventilators with one or more rebates of any type and pattern including joining cleat for fixing etc. complete all as specified.

S&F Powder coated aluminium window and ventilator shutters , sliding type, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable locks & handle incl all accessories etc. complete all as specified

S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws incl all necessary accessories etc. complete all as specified.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.

Cutting holes in brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required. Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

S&F 125mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11

S&F MS Butt hinges medium weight cold rolled 75mm long.

S&F 250mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F 200mm Brass barrel tower bolts, with barrel of extruded section and rolled or cast bolts and fixed.

S&F aluminium anodized barrel tower bolt of extruded section 150 mm length.

S&F 150mm Extruded brass handles, fabricated type polished

S&F extruded aluminium alloy handles fabricated type 150 mm size, anodized.

S&F 150mm Floor door stopper of brass body and tongue with hard drawn steel spring with hard drawn steel spring, fixed in floor .

S&F Door closer hydraulically regulated, with aluminium body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S&F 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

M&L for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F auto concealed, steel spider/butterfly hinges suitable for cupboards complete all as directed.

S&F Rim latches 100mm size with two levers, of brass body stove enamelled finish, polished bright.

S&F Hasp and staple, aluminium anodised 100mm size, safety type.

S&F plain sheet glass 4mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like, cutting in to required shape and size, edges rounded & polished, set in cement mortar(1:4) including pointing in white cement to match(1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as directed by Engr- in -charge.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) as urinal partitions, cutting in to required shape and size, edges rounded & polished, set in cement mortar(1:4) including pointing in white cement to match(1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as directed by Engr -in -charge.

S&F in repair wash down water closet (Pedestal Pattern) of any colour including fixing of bolts, Flush tank and seat cover, complete all as specified and directed by Engr in charge. Make : Jaquar cat No. LYS-WHT-38851S220SM or its equivalent as approved by GE.

S&F in repair Vitreous china Under counter sunk Modular wash basin white flat back size 190x550x460mm including cutting for pinning in ends of brackets including fixing of 32mm low density poly enthylene pipes (LDPE) of pressure rating 6kg/cm2, coupling, PVC connection with 15mm PTMT cheknuts, brackets all complete all as directed by Engr in charge. Make : Jaquar Cat No.- CNS-WHT-903 or its equivalent.

S&F in repairs CP towel rail including necessary screws etc complete all as specified and directed by Engr in charge. Make : Jaquar cat No. AKP-CHR-35711PS or its equivalent.

S&F CP towel ring including necessary screws etc complete all as specified and directed by Engr in charge. Make : Jaquar cat No. AQN-CHR-7721 or its equivalent.

S&F in repairs CP health faucet including necessary holding arrangements, screws etc complete all as specified and directed by Engr in charge. Make : Jaquar cat No. ALD-CHR-577 or its equivalent.

S&F Corner Glass shelf including necessary holding arrangements, screws etc complete all as specified and directed by Engr in charge. Make : Jaquar cat No. CAN-CHR1173 or its equivalent .

S&F in repairs Pressmatic pillar cock for wash hand basin, Fancy type. Make : Jaquar cat No.PRS-CHR-031 or its equivalent .

S&F Brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe complete all as specified and directed by Engr in charge. Make : Jaquar cat No. ALD-CHR-769L or its equivalent .

S&F in repairs over head shower with Arm 300x300mm square shape single flow (Body and face plate stainless steel with chrome finish) with rubbit cleaning system, complete all as specified and directed. Make : Jaquar cat No.OHS-CHR-1639 or its equivalent .

S&F in repairs 15mm dia two way bib taps with wall flange (Fancy type), cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete with check nut , 15mm bore complete all as specified & directed. Make : Jaquar cat No.VGP-CHR-81041 or its equivalent .

S&F in repairs 15mm dia bib taps with wall flange (Fancy type), cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete with check nut , 15mm bore complete all as specified & directed. Make : Jaquar cat No. VGP-81037 or its equivalent .

S&F towel rack with lower hanger (stainless steel), complete all as specified & directed. Make : Jaquar cat No. AQN-CHR-7781 or its equivalent .

S&F Single Lever Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges (without over head shower), complete all as specified & directed. Make : Jaquar cat No.OPP-CHR-15117M or its equivalent as approved by GE.

S&F in repairs 15mm dia Angle cock with wall flange (Fancy type), cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete with check nut complete all as specified & directed. Make : Jaquar cat No.VGP-81053 or its equivalent as approved by GE.

S&F in repairs 15mm dia concealed stop valves,(Fancy type), cast copper alloy, chromium plated screwed down, high pressure with crutch or butter fly handle, screwed both ends, screwed for iron pipe or for unions and fixed, complete all as specified & directed. Make : Jaquar cat No.VGP-CHR-81083 or its equivalent.

S&F Soap dish all as specified & directed. Make : Jaquar cat No. ACN-CHR-1131N or its equivalent .

S&F Toilet paper holder with Flap recessed type (Stainless steel), all as specified & directed. Make : Jaquar cat No.AQN-CHR-7753 or its equivalent.

S&F in repairs Vitreous china urinals Half stall, bowl type size 375x320x620mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cm 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified. Make: Jaquar. Cat No. URS-WHT-132530 or its equivalent .

S&F Auto closing concealed urinal flush valve cock complete all as directed by Engr in charge. Make: Jaquar. Cat No. CODE: PRS-CHR-073 or its equivalent .

S&F for wall mounted 202 Stainless steel Liquid soap dispenser 800ml capacity complete, all as directed by Engr in charge. Make: Orchids Cat No. SKU OR/SD/24E or its equivalent .

S&F for wall mounted Paper towel dispenser AISI-304 stainless steel finish 400-600 C/Z towel capacity, all as directed by Engr in charge Make: Jaquar Cat No. PTD-SAP-DT0106CS or its equivalent.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Supplying and laying of CPVC pipes 20mm Outer dia, SDR 11 & Plain CPVC SDR 11 fittings on wall, ceiling and in floors all as specified and as directed.

Supplying and laying of CPVC pipes 25mm Outer dia, SDR 11 & Plain CPVC SDR 11 fittings on wall, ceiling and in floors all as specified and as directed.

S&F GI tubing 15 mm dia medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete.

S&F GI tubing 20 mm dia medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete.

S&F GI tubing 25mm dia medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete.

S&F in repairs of Gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed. Bore of pipe 25mm

Cutting chases in Brick walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring , etc., and making good, cutting not exc 10 cm but not exc 20 cm girth

S&F PVC connections 15mm size with PTMT nuts of length 450mm

M&L for PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement

M&L for PVC (SWR) gully traps 125 x 110 mm, setting and jointing with solvent cement

Taking down soil waste/vent pipes (any size or length) pattern), including all fittings,

S&F PVC( SWR ) pipes 110mm dia single socketed , in any length fixed to wall or laid in floors , complete all as specified and directed.

S&F PVC( SWR ) pipes 75 mm dia single socketed , in any length , fixed to wall or laid in floors ,complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia with access door any radius .

S&F PVC (SWR) bends 75 mm dia with access door.

S&F PVC (SWR) vent cowl 110mm dia

S&F 50mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

M&L for preparation of newly plastered or un plastered surfaces of walls and applying 3mm thick wall care putty on internal surfaces of walls, rubbing with sand paper to achieve a level and smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment and applying 3mm thick wall care putty on internal surfaces of walls, rubbing with sand paper to achieve a level and smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment in existing ceiling surfaces, including removing nails, making good cracks and holes with wall care putty etc and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Surface excavation n. exe 30 cm deep and avg 15 cm deep and getting out in any type of soil

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth; for fdns, or for wells manholes et c. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Any type of soil

M&L for PCC 1:4:8 ,Type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all specified and as directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all specified and as directed.

M&L for cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregate, mixed with water proofing compound as in damp proof course complete all as specified and as directed.

M&L for precast cement concrete solid block masonry exc 10cm width with PCC 1:3:6 Type C1 using 20mm graded stone aggregate, set in CM 1:6 complete all as specified and as directed.

M&L for precast cement concrete solid block masonry n exc 10cm width with PCC 1:3:6 Type C1 using 20mm graded aggregate, set in CM 1:4 complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded course aggregate, as in lintels upto 1.50m span, copings, kneelers, apex stones, bed plates, kerbs complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips,

M&L for Mild steel TMT bars 5mm dia and over and upto and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Gd I IS 432 (part I)

S&F Steel work as in tubular trusses, purlins, Post etc including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS 1161-79 grade St-240

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

M&L for Cutting out concrete blocks, slabs, brickwork or stone masonry (in alternate course), forming toothings for and bonding new work in Type B1 1:2:4 (20mm graded stone aggregate) and set in cement mortar 1:6 into old work, including new materials entering old wall complete all as specified and directed.

M&L for Hardcore metal (broken stone or boulders) of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface and all as specified and as directed.

M&L for 75mm thick Cement concrete 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base to floor complete all as specified.

M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes

M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for rendering/backing coat 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces for laying dado/skirting etc. complete all as specified and directed.

M&L for Glazed coloured ceramic tiles of size 300 x 200x7mm / 350x250mmx7mm /450X 350x7mm thick in vertical surfaces such as skirtings, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile

M&L for 75mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate), finished the surface even and smooth without using extra cement complete all as specified and directed.

S&F frosted or grounded/obscured type sheet glass,3mm thick, and glazing with oil putty in squares n.exc 0.50 Sqm in each pane.

S&F 250mm long aluminium anodised sliding door bolt with hasp , staple cast type complete all as specified and as directed

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer on complete all as specified and as directed.

M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for preparation of new or previously un treated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F Gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed. Bore of pipe 25mm

S&F Vitreous China Urinal, Half stall type, white including chromium plated waste coupling, brackets, waste pipe etc. complete

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white incl seat cover, P trap and fixing bolt etc. (excluding flushing cistern and flush pipe) complete all as specified.

S&F Wash basins, Vitreous China (flat back or angle back type) of size 630 x 450mm, including brackets, waste fittings etc. complete all as specified and as directed.

S&F tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets. complete all as specified and as directed.

S&F Stop valves/Angle cock fancy type, chromium plated . Bore of pipe 15 mm.

S&F Bib taps fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. Bore of pipe 15mm

S&F Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. Bore of pipe 15mm

S&F PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr cap white with flush pipe & all fitting complete all as specified.

S&F 100mm dia PTMT grating doom (Min wt. 25 gms) complete all as specified

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make: cera or its equivalent

S&F PVC (SWR) vent cowl 75mm

Returning, filling in, including spreading, levelling, watering well ramming in layers not exceeding 25 cm thick in hard/dense soil all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and deposited where directed at level not exceeding 1.5 meters above the starting point.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc, removing materials to store, or keeping in safe custody for re-use at site or offering credit,& making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down carefully aluminium sub main wiring and offering credit including making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Point wiring complete with 1.5 sqmm single core PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade with multistranded copper conductor drawn through concealed PVC conduit not less than 20mm dia and including provision of PVC insulated heavy duty copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators Including fixing PVC round block 8 cm dia and 4 cm in depth etc., for the following:-

One light/Exhaust Fan point controlled by one switch.

One socket 6 amp on independent board.

All as per item No 138 above but wiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuty cable for 6 pin 15 Amps socket out controlled by 15 Amps switch.

Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminals.

Supply and fix Modular Switch Socket combinationb 6 Amps, 3 pin, 3 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 3 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 6 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX Metal flush box 3 module ISI marked including flushing the Box inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fix MODULAR METAL FLUSH BOX Metal flush box 6 module ISI marked including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated heavy duty ISI Marked unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 20 mm dia non matallic rigid PVC white conduit and conduit accessories concealed, and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 4 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed by Engineer-in-charge.Note:- Two Run of 4 Sq mm, One Run of 4 Sqmm And PVC conduct is measured as one Run or one Meter.

Supply and fixing round shape 15/18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete and directed by Engr in charge.

Supply and fix in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete and directed by Engr in charge.

Supply and fixing PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep as specified and directed by Engr in charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete and directed by Engr in charge.

Supply and install Stainless steel matt finish automatic wall mounted Hand dryer touch free infared activation, Sensor range 12 to 15 cm, Auto cutoff - 60 seconds, Motor speed- 25000 RPM brush AC type, 220 volts, Air speed - 95 m/s, Hand dry time- less than 20 sec, Rated power - 1350 watts all as specified and as directed by Enge-in-Charge. Make - Euronics or equivalent.

Supply and fix electric water heater (Geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc alongwith the followings : (a) Supply and laying steel water tubing medium grade 15 mm dia with all fittings and fixed to concealed in walls all as directed - 02 RM. (b) Supply and fix Bib taps for 15 mm dia pipe fancy type,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or CPVC pipe - 01 No. (c) Supply and fix Stop valve fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed bith ends for iron pipe 02 Nos. (d) Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm - 02 Nos

Supply and fix single pole and netural encloser with a two pin and earth plug socket complete with one single pole MCB of 20 Amps, C Curve, 10 KA rupturing capacity.

Supply and fix in repair sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 4 way with 200 amps rated bus bar, Double door complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and Fix in repair MCB SPN 32A, 10 KA rupturing capacity.

Supply and Fix in repair MCB SP 6 to 32A 10 KA rupturing capacity.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth all as directed.

M & L for Provision of hole on the wall for fixing of the exhaust fan and connecting with the ceiling rose complete all as specified and directed by Engr-In-charge.

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level connected to 4 mm dia GI earth wire as earth lead by means of bolts,nuts,washers of Gl all as shown in electrical plate No 3 of SI part I connected to earth test point including earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1 cover 40mm thick including 6 mm dia reinforcement and funnel watering pipe etc all as specified and directed.

Raghu M Contractor