Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹29.8 L+₹82,084 (2.84%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹30.5 L+₹1.5 L (5.32%)Rejected-Finance | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹30.7 L+₹1.7 L (5.98%)Rejected-Finance RAHEJA NIWAS 243 GHORPADE PETH PUNE 411 042 | PUNE | PUNE | MAHARASHTRA | 411042 | L4 | Rejected-Finance Being not lowest | |
| 5 | L5₹32.4 L+₹3.4 L (11.9%)Rejected-Finance | L5 | Rejected-Finance Being not lowest |
| Sl No | Description | Qty | Unit | KASTURILAL HARICHAND OHRI AND SONS L7 | Mahesh Traders L4 | M/s REETA ENTERPRISES L5 | SHIV ENTERPRISE L3 | SHUBH ASHISH ENTERPRISES L8 | M/s S.D Construction Co L9 | SHREE SHIV SHANKER ENTERPRISE L2 | VISHWAS ENTERPRISES L1 | binta construction L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00(A) Removal of following unserviceable parts of existing furniture items of various MES F/DB/FD drgs carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueint, providing hinges, denting applying putty for levelled surface, placing every part in-tact and painting/polishing the disturbed portion, as applicable as per drgs, all as specified and directed by Engr-in-Charge. (B) Work will be executed where the furniture exist in Md Accn of GE(West) including BSO'S Furniture Yard all as specified and directed by Engr-in-Charge. | ||||||||||||
| 2.00Charpoy Steel (MAP): Drg No FD/MAP-II/01: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. | ||||||||||||
| 2.01 | Stiffener | 285 | Each | 90 ₹25,650 | 35 ₹9,975 | 30 ₹8,550 | 90 ₹25,650 | 82 ₹23,370 | 105 ₹29,925 | 50 ₹14,250 | 20 ₹5,700 Lowest | 120 ₹34,200 |
| 2.02 | Long rail | 180 | Each | 600 ₹1,08,000 | 200 ₹36,000 | 70 ₹12,600 | 85 ₹15,300 | 190 ₹34,200 | 300 ₹54,000 | 250 ₹45,000 | 45 ₹8,100 Lowest | 170 ₹30,600 |
| 2.03 | Short Rail | 210 | Each | 300 ₹63,000 | 100 ₹21,000 | 60 ₹12,600 | 90 ₹18,900 | 104 ₹21,840 | 200 ₹42,000 | 150 ₹31,500 | 32 ₹6,720 Lowest | 150 ₹31,500 |
| 2.04 | Leg | 240 | Each | 100 ₹24,000 | 35 ₹8,400 | 60 ₹14,400 | 90 ₹21,600 | 64 ₹15,360 | 90 ₹21,600 | 100 ₹24,000 | 33 ₹7,920 Lowest | 140 ₹33,600 |
| 2.05 | Plywood and nut & bolt with washers for plywood | 520 | Each | 6 ₹3,120 Lowest | 1,100 ₹5,72,000 | 1,200 ₹6,24,000 | 650 ₹3,38,000 | 1,333 ₹6,93,160 | 1,300 ₹6,76,000 | 1,025 ₹5,33,000 | 1,150 ₹5,98,000 | 1,100 ₹5,72,000 |
| 2.06 | Hard Rubber Shoe | 2,272 | Each | 7 ₹15,904 | 2.5 ₹5,680 Lowest | 3 ₹6,816 | 35 ₹79,520 | 10 ₹22,720 | 19 ₹43,168 | 10 ₹22,720 | 5 ₹11,360 | 5 ₹11,360 |
| 2.07 | Preparing steel surface and applying two coats of Anti Rust PU eanmel paints over one coat of primer including scrapping old paints and applying putty to steel surfaces in the furniture (Charpoy steel MAP) as per Drg No - FD/MAP-II/01. | 568 | Each | 100 ₹56,800 | 75 ₹42,600 | 60 ₹34,080 | 80 ₹45,440 | 91 ₹51,688 | 190 ₹1,07,920 | 25 ₹14,200 Lowest | 35 ₹19,880 | 100 ₹56,800 |
| 3.00Bed steel hard with ply top (MAP): DRG No FD/E6/MAP-II/08(R): Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. | ||||||||||||
Tender Value
₹49.6 L
EMD Value
₹99,200
Closing Date
7 Aug 2025, 6:00 pmClosed
Kameshwar Prasad, IDSE, EE
GE (West) Colaba
REPAIRS TO STEEL FURNITURE FOR MARRIED ACCN AT BSO (WEST) UNDER GE (WEST), COLABA MUMBAI
2025_MES_719460_1
8993/E8
Open Tender
Civil Works
Item Rate
180 days
GE(West), Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (W) Colaba, Mumbai
₹99,200
Yes
5 Sept 2025
9 Jul 2025
9 Aug 2025
9 Jul 2025
7 Aug 2025
24 Jul 2025
Amount
(A) Removal of following unserviceable parts of existing furniture items of various MES F/DB/FD drgs carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueint, providing hinges, denting applying putty for levelled surface, placing every part in-tact and painting/polishing the disturbed portion, as applicable as per drgs, all as specified and directed by Engr-in-Charge. (B) Work will be executed where the furniture exist in Md Accn of GE(West) including BSO'S Furniture Yard all as specified and directed by Engr-in-Charge.
Charpoy Steel (MAP): Drg No FD/MAP-II/01: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Stiffener
Long rail
Short Rail
Plywood and nut & bolt with washers for plywood
Hard Rubber Shoe
Preparing steel surface and applying two coats of Anti Rust PU eanmel paints over one coat of primer including scrapping old paints and applying putty to steel surfaces in the furniture (Charpoy steel MAP) as per Drg No - FD/MAP-II/01.
Bed steel hard with ply top (MAP): DRG No FD/E6/MAP-II/08(R): Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Stiffener
Long rail
Short rail
Head rest MDF Board both side teak face with mild steel frame
Foot rest MDF Board both side teak face with mild steel frame
Head leg
Foot leg
Head rest top horizontal rail
Foot rest horizontal rail
Ply wood alongwith nut, bolt with two washers for plywood
Hard Rubber Shoe
Preparing steel surface and applying two coats of Anti rust PU enamel paints over one coat of primer including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Bed steel hard top) as per drawing No FD/E6/MAP/08(R)
Charpoy GI Pipe FD-220/Similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Removing the exisiting all unsv ply wood from frame of charpoy, tightening/refixing the serviceable loose parts of frame supply & fixing 1948 mm long x 912 mm wide single piece fresh new plywood 12mm thick BWP Grade 1 along with flush/countersunk bolt (06 nos in Qty) of dia 10mm, length 50mm and bolt top must be flat and of dia 25mm Each bolt must be consist of two cup washers & one nut, Hole on ply for fixing bolt must be made at a distance of two inch from centre of long rail and two coats of paint emanl of furniture Paint.
MS Cleats of size 60 mm x 30 mm x 5 mm
MS angles of 25 mmx 25 mm having 5 mm
Long rail
Short rail
Elbow
Check nut
Hard Rubber Shoe
Preparing steel/ GI surface and applying two coats of Anti rust PU enamel paints over one coat of primer including scrapping old paint, sanding in the furniture (Carpoy GI Pipe) as per drawing No FD 220/ Similar pattern.
Chair Computer : FD/E6/MAP-01: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Seat of size 510mmx 470mmx 60mm with 12mm ply wood complete set
Back of Chair computer with 12mm ply wood complete set
Gas lifting assembly (fitted with bottom of the seat)
Castor wheel
Pedestal assembly
Handles and supply
M&L for Painting of all steel surfaces by coating black paint after rusting/ grinding the steel surfaces of computer chair amd laminited part shall be french polished till to achive glossy finish to chair computer.
Almirah Large Steel 1/2H x 1/2S: FD 1033: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Locks
Handles
Shutters/Doors
Shelves
Conduit pipe
M&L for removal of existing worn out paint from external surfaces of Almirah large steel 1/2Sx1/2H including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer in two shades using spray gun all as specified and directed and shown on drgs. Colour of Almirah as approved by GE/ Engr-In-Charge.
Chair Verandah FD 250/19/259/ 333/356: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Canning of Seat
Canning of Back
Rubber Shoe
M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed.
M&L for Painting of all steel surfaces by coating white paint after rusting/ grinding the steel surfaces of chair Verandah.
Rack Shoe FD |FD/EG/MAP/02(R) : Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Shelves
M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed.
M&L for Painting of all steel surfaces by coating black paint after rusting/ grinding the steel surfaces of Rack Shoe.
Table Dining Steel 3' x 3' FD 1009: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Table Top along with teak wood beading
Top Long Rail
Top Short Rail
Hard rubber Shoe
M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed.
M&L for Painting of all steel surfaces by coating paint as colour approved by GE after rusting/ grinding the steel surfaces of Table Dining Steel 3' x 3'.
Teapoy Verandah FD/E6/MAP/17: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Top with teak wood Edging
Stiffner
MS Bar Base Tray
Hard rubber Shoe
M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed.
M&L for Painting of all steel surfaces by coating paint as colour approved by GE after rusting/ grinding the steel surfaces of Teapoy Verandah.
Charpoy IP Folding with Hardtop FD - 388: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.
Stiffener
Long rail
Short Rail
Plywood and nut & bolt with washers for plywood
M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed.
Rubber Shoe
Preparing steel surface and applying two coats of Anti Rust PU eanmel paints over one coat of primer including scrapping old paints and applying putty to steel surfaces in the furniture (Charpoy IP Folding) as per Drg No-388.
SHREE SHIV SHANKER ENTERPRISE (BID ID -3386374)
SHIV ENTERPRISE (BID ID -3378068)
Mahesh Traders (BID ID -3377716)
M/s REETA ENTERPRISES (BID ID -3377939)
binta construction (BID ID -3378842)
KASTURILAL HARICHAND OHRI AND SONS (BID ID -3377091)
SHUBH ASHISH ENTERPRISES (BID ID -3378813)
M/s S.D Construction Co (BID ID -3386264)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .