Restrengthening of Roads in Samta Nagar (Kh.No.-2130, 2142 to 2147 in Revenue Village Bedla). 5606

Item Code [2025 3.14]:Item Type [road] :: Construction of sub grade and earth enshoulders with approved material obtained from borrow pits with all lifts and leads , transporting to site, spreading, grading to requireds lope and compacted to meet requirement of Table 300 - 2 with lead up to 50 m as per MoRTH Specification Clause 305.3

Item Code [2025 3.5(iii) ]:Item Type [road] :: Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3

Item Code [2025 4.9 A i]:Item Type [road] :: Providing crushed run stone aggregate greading conforming to table400-14 depositing on aprepared surface by hauling vehicles ,spreading and mixing with a motor grader, watering and compacting with a three wheel 80-100 kN static roller as per MoRTH Specification Clause 407 to form a layer of sub-base/base By mix-in-place method With 53 mm maximum size of aggregates

Item Code [2025 5.1]:Item Type [road] ::Prime Coat Sub Item Code [2025 5.1 + (i)]: Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per MoRTH Specification Clause 502

Item Code [2025 UNIFIED BSR 3.4 (i)]:Item Type [road] :: Construction of embankment with approved materials obtained from borrow pits with a lift 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 50 m as per MoRTH Specification Clause 305.3

Item Code [road 2025 10.20]:Item Type [road] :: Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160"C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.

Item Code [road 2025 16.14.2]:Item Type [road] :: Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tones per hour using crushed aggregates of specified grading , premixed with bituminous binder minimum @ 4.0 & 4.5 percent by weight of total mix and filler ,transporting the hot mix to work site ,laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment,rolling with smooth wheeled ,vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 505 complete in all respects. Bitumen (VG-30) Grading - II (26.50 mm (Nominal Size))

Item Code [road 2025 16.15.5]:Item Type [road] :: Providing and laying bituminous concrete with 100- 120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading ,premixed with bituminous binder minimum @ 5.2 & 5.4 percent of mix and filler ,transporting the hot mix to work site ,laying with a hydrostatic paver finisher with sensor control to the required grade ,level and alignment,rolling with smooth wheeled ,vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 507 complete in all respects for Grading-II(13 mm nominal size) Bitumen (VG-30)

Item Code [road 2025 4.6]:Item Type [road] :: Providing ,laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (PugMill), carriage of mixed material by tipper to site ,laying in uniform layers in sub-base/base course on a well prepared sub- base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting ,barricading and maintenance of diversion ,etc as per Tables 400-12&400-13 and MoRTH Specification Clause 406. By Mechanical Means with all lead

Item Code [road 2025 5.2 ii]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503.