Annual Maintenance, Repairs and other emergent works of PHE Division Awantipora for PHE Sub Division Awantipora stage 4th

Earth work in excavation by Mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) for shafts, wells, cesspits the like not exceeding 10 sqm on plan, including dressing of sides ramming of bottoms lift upto 1.05 m. including getting out excavated earth disposal of surplus excavated earth as directed within a lead of 50 m. All kinds of soil.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) for shafts, wells, cesspits the like not exceeding 10 sqm on plan, including dressing of sides ramming of bottoms lift upto 1.5 m, including getting out excavated earth disposal of surplus excavated earth as directed: All kinds of soil (1 meter from cutting edge).

Laying fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings Earth work.100 mm 150 mm dia Gi Pipes

65 mm 80 mm dia Gi Pipes

40 mm 50 mm dia GI Pipes

25 mm 32 mm dia GI Pipes

15 mm 20 mm dia GI Pipes

Providing and fixing G.I. pipes ( medium class) complete with G.I. fittings excluding trenching and refilling etc. 15MM DIA 15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

32 mm dia nominal bore

40 mm dia nominal bore

50 mm dia nominal bore

65 mm dia nominal bore

80 mm dia nominal bore

100 mm dia nominal bore

150 mm dia.nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing fixing Tee, including cutting threading the pipe etc. complete 25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore

25 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). 65 mm Dia

80mm Dia

100mm Dia

150 mm dia.

200 mm dia.

250 mm dia.

Providing fixing G.I. Unions in existing G.I. pipe line, cutting threading the pipe making long screws including excavation, refilling the earth or cutting of wall making good the same complete wherever required. 15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

Providing fixing G.I. Elbows in G.I. pipe including cutting threading the pipe making long screws etc. complete (new work):15 mm dia G.I. elbows

20 mm dia G.I. elbows

25 mm dia G.I. elbows

40 mm dia G.I. elbows

50 mm dia G.I. elbows

65 mm dia G.I. elbows

80 mm dia G.I. elbows

Providing fixing G.I. Reducing Sockets in G.I. pipe including cutting threading the pipe etc. complete (new work):20 mm to 15 mm G.I. sockets (reducing)

25 mm to any smaller size G.I. sockets (reducing)

40 mm to any smaller size G.I. sockets (reducing)

50 mm to any smaller size G.I. sockets (reducing)

Providing fixing G.I. Tee in G.I. pipe including cutting threading the pipe etc. complete (new work):15 mm G.I. Tee (equal)

20 mm G.I. Tee (equal)

25 mm G.I. Tee (equal)

40 mm G.I. Tee (equal)

50 mm G.I. Tee (equal)

65 mm G.I. Tee (equal)

80 mm G.I. Tee (equal)

80 mm dia G.I socket

65 mm dia G.I. Socket

50 mm dia G.I. Socket

40 mm dia G.I. Socket

25 mm dia G.I. Socket

20 mm dia G.I. Socket

50 mm dia G.I. Nipple upto 10"

40 mm dia G.I. Nipple upto 10"

25 mm dia G.I. Nipple upto 10"

20 mm dia G.I. Nipple upto 10"

15 mm dia G.I. Nipple upto 10"

20x20x15 mm dia G.I. Tee

25x25x20 mm dia G.I. Tee

40x40x25 mm dia G.I. Tee

50x50x40 mm dia G.I. Tee

65x65x50 mm dia G.I. Tee

80x80x65 mm dia G.I. Tee

Dismantling G.I. pipes (external work) including excavation refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge:15 mm to 40 mm nominal bore.

Above 40 mm nominal bore.

Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 meters.Upto 150 mm diameter.

Above 150 mm diameter.

Dismantling of spindle/rod check nuts of flanged type sluice valves by way of manufacturing of new spindle/rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve

Providing/fixing of double collers, G.I./M.S. for arresting of leakages by using led & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages:For all Dia's.

Providing fixing including testing, commissioning of MS Flanges to GI pipe including laying/fitting of pipes, cutting of threaded portion, welding, cost of nuts, bolts, washers all carriages etc, complete job at site for:150 mm dia MS Flanges (10 mm thick)

100 mm dia MS Flanges (10 mm thick)

80 mm dia MS Flanges (10 mm thick)

65 mm dia MS Flanges (08 mm thick)

50 mm dia MS Flanges (08 mm thick)

Manufacturing/fabrication/providing fixing including testing, commissioning of MS bends including welding, cost of nuts, bolts, washers all carriages, complete job at site :For all Dia's.

Hire Charges of of 2000 litres PVC Tank mounted Tata Mobile for supplying water with all accessories needed for filling & supplying the water tank including all other charges for supplying of the water wherever required all complete job.excluding POL

Hiring charges of Hydraulic excavator of 1 cum bucket

Welding including transportation of welding machine at site including charges of Welder, Helper, Electrodes, DG Set, etc. all complete Job

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming watering, lead upto 50 m lift upto 1.5 m.

Cutting road making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri labour required. Bituminous portion

Water bound macadam

Supply of unskilled labours (Helpers)

Supply of skilled labours (Helpers)

Carriage of material from divisional store up to dumping site of work, including loading, unloading stacking etc. complete by Mechanical Transport G.I /C.I pipe avg. lead upto 30 Km

Carriage of Alum/ bleaching powder from Divisional store to various sites and solvaged material from one sites to another site or upto Divisional store at an avg lead of 30 km including loading unloading stacking complete job.

Taking out filter media manually from filtration plants including washing segration of aggregate and laying back after proper grading complete

supply and laying of filter media from Ganderbal including all leads and lifts up to site of work complete

Disconnecting main electrical connection of voltage stablizer of any make , capacity from 75 KVA to 5KVA and opening of stablizer cover for checking / examing / replacing as required including connecting the same electrical connection after necessary repair complete all as directed . Note spare parts shall be measured and paid seperately

Hire charges of vehicle along with driver / public adress system (i.e loud speakers etc) for collection of water taxes

M&L for re- winding of stabilizer coils/motor of any type /make with superior quality super enamelled copper winding wire of suitable guage and number of turns alongwith allied material such as cork sheet, fibre glass insulation / paper insulation cotton, empire tape and wooden blocks , bolts,nuts and washers, soldering and other packing material complete all as directed by engineer in charge and commissing of charges.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and fixing gun metal non-return valve of approved quality (screwed end 100mm dia

80mm Dia

65mm dia

50mm dia

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

providing and laying of dry stone dully hand packed including the cost of stone and carriage complete.

Supply of dewatering pump including all charges of POL and carriage upto site of work.

Supply /laying of stone dust including all carriage complete.

P/L of 2.5 mm copper wire of manifacturing

Supply of spun yarn

Repairs to glass panes by way of replacing of damaged panes by 3mm glass sheet

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws second class Kail wood 30mm

Supply and printing of flex sheets of any size including cost of printing,fixing complete.

Hire charges of Hydraulic excavator long boom (LNT) incl. carriage upto 10 Km

Providing and supply 50 square mm almunium wire 2 core

Providing and supply 63 Ampere Switch

Providing and supply 63 Ampere Bus Bar

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Engagement of Boat (capacity upto 10 cum) with boat man and sufficient 04 job knowing skilled labour for desilting of offtakes upto 10 feet depth.

Demolishing RCC work by mechanical means & stockpiling at designated locations & disposal of dismantled materials upto a lead of 1 kilometer, stacking serviceable & unserviceable material separately including cutting reinforcement bars

Providing and fixing of concertina wire.

Providing and fixing of DI double flanged non rising spindle soft seated glandless sluice Valve as per IS 14346 for regulating the water supply.150mm dia

100mm dia

80mm dia

65mm dia

50mm dia

supply of A4 legal of standard quality

supply of tunner for HP printer Laserject

supply if Ink for smart tank printer

Desilting of various structures incl. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution complete job.Using buckets, ropes etc. Manually

Through washout by Mix silt with water

Centering and shuttering including strutting, propping etc, and removal of form for.Foundations, footings, bases of columns etc for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Suspended floors,roofs, landings ,balconies & access platforms

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge

Hire charges of concrete cutter for cutting of cement concrete , RCC etc along with operator & all carriages upto the site of work.

Cleaning of intake sump of WSS Augmentation Awantipora by way of engaging of desilting pump of required capacity along with all necessary components such as Generator/ Electricity for operation of the said pump . The job also includes engaginf of 04 labours for loosening of accumulated compacted mud at the base of the sump.

Pumping out of muddy water from intake sump by way of engaging of desilting pump of required capacity along with all required components such as Generator/Electricity for operation of the said pump.

Demolishing RCC work by mechanical means & stockpiling at designated locations & disposal of dismantled materials upto a lead of 1 kilometer, stacking serviceable & unserviceable material separately including cutting reinforcement bars

Providing and fixing of concertina wire.

Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete,including cutting and making good the walls and floorswherever required.

Providing/ fixing of 100/65 mm solid waste pipes (B Class)

providing and fixing kitchen sink with C.I. brackets, C.P. brasschain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting andmakinggood the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm

Providing /fixing of 50 litre capacity electric geyzer with all necessary wiring & switches

P/F of granite stone engraved with alphabetical letters upto 80 words of size 0.75x 0.60 m embeddede in cement concrete 1:2:4 complete job

Carriage of material from source up to dumping site of work, including loading, unloading stacking etc. complete by Mechanical Transport Cement/ SteeI/CGI Sheets pipe avg. lead upto10 Km

Sand/ Stone aggregates below 40 mm for an average lead of 10 km

Re threading of damaged pipe ends including carriage from site to workshop and back to site 20 mm

50mm dia

Supply and installation of portable type water dispenser ( top load , hot and cold, 220 volt)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

Providing and fixing aluminum work For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)