Special repairs to road at Mil Stn Beas under GE Kapurthala

Amount

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 5 Kg per 10 Sqm of road surface, laying, rolling, consolidating 30 mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% binder content by weight of total mix laid with mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller complete all as specified and directed. Note: Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

Material & Labour for providing and marking 2mm thick broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with thermoplastic paint hot applied with machine conforming to BS-3262 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed.

Material & Labour for providing and marking 4mm thick broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with yellow thermoplastic paint hot applied with machine conforming to BS-3262 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed.

Supply & fix in repairs road studs high density reflective lens ABS plastic body yellow colour 90x100x17mm fixed with steel nails and adhesive including taking down old road stud any type any description complete and as specified . Make : 3M-290 of 3M or equivalent of Greenlite / TATA BP SOLAR

Supply & fix in repairs aluminium alloy solar stud of size 140mm x 128mm x 82 mm dia of shank 42.5 mm and 54 mm high, unbreakable ,scratch proof polycarbonate of compressive strength 25 ton , 100% water proof of colour Amber, Green,blue and white complete all as specified. Make:- DARKEYE (DHRUV) OR EQUIVALENT INTATA BP SOLAR OR GREENLITE.

Supply and fix in repairs Acrylic dual directional reflector delineator having 100mm dia cube corner high intensity reflector (signal red/yellow/white) holded in strong plastic ABS body mounted over CRC steel tube 47mm dia of 16 gauge sheet support of total height 600mm having flared/welded foot for firm grip to base. Acrylic reflector and ABS body protected in a welded mesh cage. Vertical pipe welded with a CRC sheet 18 gauge of size 100 x 200mm having oblique red reflective sheets over reflective white base. All steel parts stove enameled and baked to 120 degree C to make all weather resistant including fixing in ground with necessary earthwork & PCC (1:2:4) complete all as specified and directed. Make : Cat Pt No DA 77 of DARK EYE OR EQUIVALENT INTATA BP SOLAR OR GREENLITE.

Demolition of cement concrete in ground floor and paving not exc 15 cm thick (below or above ground level) and removing debris and rubbish out of the premises to a distance exc 200m and not exc 250m and depositing where directed complete all as specified and directed.

Material & labour for 100mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in flooring/hard standing finishing the surface even and smooth without using extra cement complete all as specified & directed.

Material & labour for sand filling under floors or in foundation incl spreading and consolidation complete all as specified and directed. Note : Punned down thickness shall be measured

Material & labour for 100mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-50 Grade with grey cement and pigment. The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:4) complete all as specified and directed.

Material & labour for rendering 15mm thick cement plaster in two layers (10mm+5mm) in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified

Material & labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

SATISH AGGARWAL AND CO

J K AND COMPANY