REPAIR TO STEEL AND WOODEN FURNITURE AT JASAI UNDER GE ARMY BARMER

Amount

SOFA SET 4/5 SEATER FD-281/373: (a) S&F of cushion foam for sofa set size 525x525x100mm, 32 density (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 300/- per RM

(b) M&L for polishing of sofa set 4 seater with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

M&L for polishing of sofa set 5 seater with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

BED PLY WOOD TOP FD-246/247- (a) S&F in repair following parts of bed Ply wood top as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed : (a). Head rest shall be made as per drg

(b) Foot Rest shall be made as per drg

(c) Long rails shall be made of Ist class hard wood (Shisham)

(d) Short rails shall be made of Ist class hard wood (Shisham)

(e) Stiffener shall be made of Ist class hard wood (Shisham)

(f) MS bracket of flat iron 25x3mm,200mm long fixed with screw

(g) Ply wood top 12mm thick BWR plywood as per existing shape and size in One piece

(h) M&L for polishing of bed Plywood top with high class French polish to all exposed surfaces except top & bottom after preparation of surfaces

CHAIR DINING FD-16(M)/203/ 279 -(a) S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- (a) Rear Legs

(b) Front Legs

(c) Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(d) Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(e) Bottom stiffener

(f) Back stiffener

(g) M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR WRITING FD-20(M)/202/280 :- S&F in repair following part of chair writing with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. (a) Rear legs

(b) Front Legs

(c) Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(d) Front/Back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(e) Bottom stiffener

(f) Back stiffener

(g) Arm rest

(h) M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR EASY FD-17(M)/201 /229 :-(a) S&F in repairs following parts of the chair easy with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed - (a) Rear Legs

(b) Front Legs

(c) Side Rails

(d) Front/Back Rails

(e) Back Stiffener

(f) Bottom Stiffener

(g) Arms rest

(h) M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

PEG TABLE FD-236/266 /277/384 :- S&F in repair of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly planned as shown on drawing complete all as specified and directed : (a) Legs

(b) Long rail

(c) Short rail

(d) Side stiffener

(e) Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed

(f) M&L for polishing of table Peg with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

TABLE DINING 06/08 PERSON FD-239/269 /273 :- S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specified and directed.: (a) Taking down old U/S top of table dining 06/08 pers and S&F new top of 18 mm thick pre-laminated patrticle board one side teak face and other side white balancing exterior grade with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed.

(b) Legs

(c) Long rail

(d) Short rail

(e) Stiffener

(f) M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

TRESTLE STORE ROOM WOODEN FD-141(M):- Repair of following parts of trestle store room wooden as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :-(a) Taking out u/s legs of trestle store room wooden, supply and fixing of new leg of size 400mm x 100mm x 100mm of first class teak wood, as per drg

(b) Taking out u/s rails of trestle store room wooden, supply and fixing of new rail of size 2440mm x 100mm x 100mm of first class teak wood, as per drg

(c) Taking out u/s centre stiffener of trestle store room wooden, supply and fixing of new centre stiffener of size 1220mm x 65mm x 100mm of first class teak wood, as per drg

(d) Taking out u/s side stiffener of trestle store room wooden, supply and fixing of new side stiffener of size 1980mm x 65mm x 100mm of first class teak wood, as per drg

(e) M&L for polishing of trestle store room wooden with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed.

ALMIRAH LARGE STEEL WITH SHELVES FD-67 (M)/351/1031 :- (a) Removal of old existing U/S shutter (Single Leaf) of almirah large steel and S&F new shutter made of 1 mm thick PBI sheet as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.

(b) All as per item No 52 above but Shelves

(c) All as per item No 52 above but Cover plate of locks

(d) Removing U/S lock of almirah large and S&F new brass lock 6 levers Godrej pattern as per existing size with duplicate keys complete all as specified and directed

(e) Removing of old U/S lock assembly and S&F new lock assembly of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer and preparation of new steel surfaces complete all as specified and directed.

(f) Removing of old U/S handle of almirah and S&F new chromium plated steel handle of existing shape and size complete all as directed

(g) Removing of old U/S key plate and S&F of new Chromium plated key plate fixed with screw and nuts of almirah large steel complete all as directed.

(h) Removing of old U/S leg of almirah large steel and S&F new leg made of 1 mm thick PBI sheet with Gas welding as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.

(j) M&L for painting spray painting of almirah large steel with two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed.

ALMIRAH MEDIUM STEEL WITH SHELVES FD-67 (M)/350 /1032 :-(a) All as per item No 52 above but Shutter of Almirah Medium

(b) All as per item No 52 above but Shelves of Almirah Medium

(c) All as per item No 52 above but Cover plate of locks of Almirah Medium

(d) All as per item No 55 above but locks of Almirah Medium

(e) All as per item No 56 above but lock assembly of Almirah Medium

(f) All as per item No 57 above but Handle of Almirah Medium

(g) All as per item No 58 above but Key Plate of Almirah Medium

(h) All as per item No 59 above but Legs of Almirah Medium

(j) All as per item No 60 above but Painting of Almirah Medium

LOCKER BED SIDE STEEL FD-257/1029: (a) All as per item No 52 above but Shutter of Locker steel

(b) All as per item No 52 above but shelves of Locker steel

(c) All as per item No 57 above but Handle 'D' type of Locker steel

(d) All as per item No 59 above but Legs of Locker steel

(e) All as per item No 60 above but Painting of Locker steel

(f) Removing of old U/S haps and stapple and S&F of new Chromium plated haps & stapple fixed with rivets of locker steel complete all as directed.

TABLE DINING OR's FD-165(M) : (a) Supply and fixing in replacement including welding mild steel square tube of size 25mm x 25mmx 1.6 mm thick as in frame complete all as specified as directed and as shown on drawing.

(b) Supply and fixing in replacement of top with 18 mm thick block board of size 1900 mm x 685 mm with aluminium sheet 22 guage on top complete all as specified , as directed and as shown on drawing.

CHAIR CB STEEL WITH ARMS FD-75(M) : Removal of old U/S seat frame and S&F new seat frame of 1st class hard shisham wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed.

(b) All as per Srl item No 78 above but back frame

(c) Removal of old u/s arms of chair CB steel with arms and S&F new arms made of 1st class hard shisham wood duly planned,finished smooth with black hish class polish and fixed with steel screws of required size complete all as specified and directed.

(d) M&L for painting to chair CB steel with arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

CHAIR VERANDAH FD-256/259/359: S&F in repair following part of chair verandah as per existing shape and size as shown on drawing complete all as specified and directed : (a) Legs with arm rest of 19mm dia MS conduit 1.5mm thick incl one coat of red oxide primer.

(b) Seat frame of 19mm dia MS conduit 1.6mm thick incl one coat of red oxide primer

(c) Back frame of 19mm dia MS conduit 1.6mm thick incl one coat of red oxide primer

TABLE OFFICE CLK/TYPIST STEEL FD-84(M)/1004 : Taking down old U/S top of table Clk/Typist and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed.

(b) Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

(c) Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completed all as specified and directed.

(d) Taking down old U/S long rail table office clk/typist and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

(e) All as per item No 88 above but short rails

(f) All as per item No 88 above but stiffener

(g) All as per item No 88 above but legs

(h) Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

(j) M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

TABLE 3' x 2' STEEL WITHOUT DRAWER STEEL FD-1007: (a) Taking down old U/S top of table 3' x 2' and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed.

(b) Taking down old U/S long rail table office 3' x 2' and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

(c) All as per item No 95 above but short rails

(d) All as per item No 95 above but stiffener

(e) All as per item No 95 above but legs

(f) Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

(g) M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr -in charge

SIDE RACK WITH TRAY STEEL FD-1023: (a) Removal of old u/s Shelves of side rack with tray steel and S&F new shelves made of 1mm thick PGI sheet as per existing shape and size incl two coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of newsteel surfaces complete all as specified and directed

(b) Removal of old u/s legs of side rack with tray steel and S&F new legs of size 40x40x3mm angle as per existing shape and size incl two coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed

(c) M&L for painting to iron surface of side rack with tray steel with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed by Engr -in charge

RACK 6 TIER STEEL FD-1038 : (a) Removal of old u/s Shelves of rack 6 tier steel and S&F new shelves made of 1mm thick PGI sheet as per existing shape and size incl two coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of newsteel surfaces complete all as specified and directed

(b) All as per item No 104 above but back

(c) All as per item No 104 above but side

(d) All as per item No 104 above but top

(e) Removal of old u/s legs of rack six tier steel and S&F new legs of size 40x40x3mm angle as per existing shape and size incl two coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed

(f) M&L for painting with one coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

CHAIR CB STEEL WITHOUT ARMS FD-75(M) : (a) Removal of old U/S seat frame and S&F new seat frame of 1st class hard shisham wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed.

(b) All as per item No 110 above but back frame

(c) M&L for painting to chair CB steel without arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

FORM WITH OUT BACK FD-77(M): (a) Removal of old U/s plank of form with out back and S&F new plank of form without back of size 1525mm x 255mm x 25mm made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts (09 Nos) complete all as specified and directed by Engr -in charge.

(b) M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

FORM WITH BACK FD-78(M) : (a) Removal of old U/s Seat plank of form with back and S&F new Seat plank of form with back of size 1800mm x 255mm x 25mm made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts complete all as specified and directed by Engr -in charge.

(b) Removal of old U/s Back plank of form with back and S&F new back plank of form with back of size 1800mm x 150mm x 19mm made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts complete all as specified and directed by Engr -in charge.

(c) M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

TABLE OFFICE OFFICER STEEL FD-1003 : (a) Taking down old U/S top of table office officer steel and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed.

(b) Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

(c) Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completed all as specified and directed.

(d) Taking down old U/S long rail table office clk/typist and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed by gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

(e) All as per item No 121 above but short rails

(f) All as per item No 121 above but stiffener

(g) All as per item No 121 above but legs

(h) Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

(j) M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

GI PIPE CHARPOY WITH NYLON NEWAR FD-220 : (a) S&F in replacement of u/s Elbow galvanized iron 32 mm dia 3 ways complete all as specified and directed. Note weight of each elbow not less than 450 grams

(b) S&F in replacement of u/s check nut galvanized iron 32 mm dia, complete all as specified and directed Note :- weight of each check nut not less than 125 grams

(c) S&F in replacement of long rail of 32 mm dia galvanized iron pipe medium grade incl cutting threading at both ends complete all as specified and directed

(d) Fixing only in repairs short rail of 32 mm dia GI pipe medium grade incl cutting, threading as required for short rail of GI Charpoy complete all as specified and directed Note :- short rail shall be converted from long rail retrieved vide item No 129 above.

(e) Fixing only in repairs legs of 32 mm dia GI Pipe medium grade cutting, threading at one end as required for legs as per existing size incl S&F 1.6 mm thick, 40 mm dia MS Sheet base plate welded on another end complete all as specified and directed. Note :- Legs shall be converted from pipe retrieved vide item No 130 above.

(f) Removing old UNSV nylon newar from the frame of charpoy GI pipe and tightening the frame and making it suitable for and including supply and fixing 12mm thick BWR plywood and also supply and fixing MS Flat iron of size 40mm x 3mm thick and 900mm long -02 Nos alongwith plwood top and fixed with 6mm dia 65mm long brass coated nuts & bolt with 02 Nos washers including drilling 04 Nos holes on each long rail and 02 Nos holes on each short rail and 03 Nos holes on each MS Flat iron, all as directed by Engr-in-charge. Note :- MS flat iron should be paint two coats of black synthetic enamel paint over a coat of red oxide paint

RE-CANNING OF CHAIRS FD-228,229, 279,280,252,244 :- Taking out old u/s cane from chairs etc and re-canning of wooden chairs, dressing stool,Bin solied linen etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed.

RE-CANNING TO CHAIR VERANDAH FD-256/259 :- Taking out old U/S cane from chair verandah and recanning seat and back with new 4 mm wide half round white plastic cane of superior quality incl painting with two coat of white synthetic enamel paint and preparing of old steel surfaces.

M/s godara infratech and power industries

SNEH CORPORATION

M/s B. S. Solanki Builders

SK INDUSTRIES