Providing, installation, testing and commissioning of 20000 GPH x 100 meter head HC pump set alongwith LT control panel and allied works at pumping station Thill Roun stage-2nd (New) of WSS Thill Roun.

Amount

Providing, installation, testing and commissioning of 20000 GPH x 100 meter head HC pump set alongwith LT control panel and allied works at pumping station Thill Roun stage-2nd (new) of WSS Thill Roun by way of loading with crane and shifting of pump motor set from Jammu upto road side near pumping station Thill Roun by mechanical transport, loading / unloading the same from vehicle with the help crane and manual labour and then dragging / manual carriage up to the pumping station Thill Roun stage-2nd on channels/pipes using pick axes, crowbars, ropes, tripod stand etc. and stacking inside pump-room. Excavation for formation of foundation block of 6’x3’x4’. Dumping of excavated material outside the pump room at a distance of about 50 meters. Providing and Fabrication of 6 no. foundation bolts of suitable dia meter one meter long by threading them at one end and making of anchor to other end. Laying of bed concrete of 1:4:8 mix using 20 percent aggregate and subsequently, laying of RCC of 1:1.5:3 mix including supply/fixing of farm work / shuttering, aggregates, sand and cement, reinforcement steel of 12mm for mesh and all RCC work, angle iron for supporting/alignment of base-frame including cutting, bending, placing in position and binding, welding, placing of foundation bolts with base frame and making proper alignment of base frame horizontally as well as longitudinally, deployment of vibrator, mixer, welding set, shuttering, tools and tackles etc. and curing complete. Job further includes dragging of pump motor set from the stacking place and then placing them on the base frame by manual labour and other tools and tackles, Leveling and alignment of pump motor set on the base frame by using laminated sheet, strips and coupling thereof. Laying of MS suction pipe 150mm dia and delivery pipe line 150mm dia to the pump set by providing, fabrication and fitting of pipe assembly as per pump specifications and site requirement in the convenient lengths with the help of oxygen acetylene gas cutting and welding. The cut edges shall be grinded with grinder to give them a smooth and even surface and then laying, aligning, welding of suction/delivery pipes in continuous fillet weld using superior quality electrodes conforming to ISI specifications. The weld should be free from blow holes, porosity, cracks to create leak proof joints. Providing, fabrication and fitting of 150mm dia MS bends, MS flanges, MS expanders/reducers. MS pipe extension pieces to suction and delivery pipe lines. Providing and fitting of 150mm dia sluice valve CI-1no. to the suction pipe line and NRV and sluice valve both 150mm dia CS-1no. each with bypass system to the delivery pipes of pump set together with nuts, bolts, washers, gas kits etc. Job further includes fabrication and fitting of manifold for connecting pump delivery pipes and rising main. Job includes greasing work, providing and fitting of graphited gland packing and thereafter testing on no and full load and commissioning thereof. Providing and fitting of electrical components i.e. 95mm2 copper cable approximately 60 meters in length from panel to motors in six leads and from MCCB to panel in three leads with proper laying, thimbling and insulation material. Job further includes providing and fitting of 185mm2 aluminum cable 3.5 core armoured from electrical transformer to voltage stabilizer as per site condition approximately 35 meters in length conforming to ISI standards. Providing and fitting of 250 ampere MCCB-1no. of Havel , L&T or other equivalent reputed make on the main board of pump room. Job further includes design, fabrication, installation, testing and commissioning of 140 ampere rating LT control panel cum protection panel for 20000 GPH x 100 meter head pump set. Complete job includes cost of material, machinery, hiring / shifting / carriage charges of material, machinery tools and tackles, skilled and unskilled labour charges.

GANPATI ELECTRICAL AND MECHANICAL WORKS

N B Engineering and Electric Works