ADDN/ALTN TO CERTAIN SMQS AT AF STN SURATGARH

Amount

BOQ (Addn/Altn to certain SMQs at AF Stn Suratgarh)

Demolition of brick masonry built in cement mortar including all quoins, arches etc. complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregates as in filling of sunken floors complete all as specified & directed.

M&L applying Dr. Fixit bathseal over the sunken portion floor of bathroom, with the products. Dr. Fixit bathseal 2K WPC - Acrylic elastomeric cementitious waterproof coating for sunken portion Floor and walls in bathroom complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No. 4 here-in-before but except bricks. Note: Old bricks obtained from Sr Item No 01 will be reused after cleaning etc.

M&L for 75mm thick plain cement concrete 1:3:6, type C2, using 40mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:12 and surface finished even and smooth without using extra cement including making joint at 2.5m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base,flooring, pavings etc complete all as specified and as directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd.

M&L for Pressed steel frames of size 105mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified.

M&L for Pressed steel frames of size 125mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified.

M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work all as specified.

S&F 35 mm thick 2nd class Hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated completely all specified and directed.

S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats Note: Glass/wire gauge shall be measured and paid for seperately.

M&L for factory made single extruded WPC (Wood Polymer composite) solid door/ window & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete as per direction of Engineer-in-Charge. Note-(i) M.S. hold fast/ lugs or SS dash fasteners shall be included. (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In-Charge. Note: Stainless steel butt inges and necessary S S screws shall be paid separately.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.

S&F 30 mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provison at lock height complete as per manufacturer’s specification and drawing or direction of Engineer-in-charge.

S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.

S&F Aluminum handles, 150 mm size plate type complete all as specified and directed.

S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified.

S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified.

S&F for aluminium powder coated glazed three track sliding window/ ventilator of frame of size 100mm x 44mm x 1.5mm and sliding shutter of section 40mmx19mm including 3mm thick sheet glass, ordinary quality, in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, including all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf, complete all as specified and as directed. Note: for the purpose of payment area of opening shall be measured.

S&F for aluminium powder coated glazed ventilator of frame 100mmx44mmx1.5mm with shutter of section 40mmx19mm top hung fixed type including 3mm thick tinted sheet glass, ordinary quality not exceeding 0.5 sqm in each pane, stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, including all fittings such as aluminium handle of size 100mm and locking arrangements with each leaf, complete all as specified and as directed.

Material & Labour for Aluminium anodised frame works such as grills with frames and frame guard bars and similar works , complete all as specified and directed

S&F Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Supply and fix in repairs factory made mild steel cupboards shutters 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle ,buttt hinges ,peg set of their,etc including two coat of synthetic paint over primer complete all as specified and directed.

S&F stainless steel 20 mm dia curtain rod including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises etc. complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection/ ceiling etc including repairing of broken portion up to 6m height and surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

M&L for complete removal of existing treatment from wall surfaces and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

Applying two coats of exterior acrylic emulsion (weather proof treatment ), in plain patterns, over new plastered surfaces , including preparation and using primer new surfaces ,complete all as specified and directed.

M&L for preparing old painted surfaces of ceiling by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified & directed by Engineer-in-charge.

M&L for complete removal of old existing treatment from wall surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, over surfaces , including preparation and using primer,complete all as specified and directed.

M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of old painted surfaces, of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering, brushing etc, filling in crevices and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified.

M&L for reinforcement cement concrete M-25 (design mix) using 20 mm graded aggregate )slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified

M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for TMT bars 6 mm to 8 mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping). Complete all as specified and directed.

M & L for formwork formwork to sides and soffits of floor or roof beams, beam haunch ings, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of approved shade of size 450 x 300 mm x 7 to 8mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for anti skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm, in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for first quality, non skid ceramic coloured tiles, 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in flooring with fiar & even surface finish. complete all as specified and directed.

M&L for water proofing layer with Dr. fixit primeseal on external & internal wall surfaces as per company instruction, complete all as specified and directed.

Demolition of stone slabs/paver block and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut polished kota stone slab flooring of size of Kotastone 550 mm x 550 mm and 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly.

M&L for polished kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly.

M&L Granite 20 mm thick of any type work(table rubbed and polished) in steps, jambs,pillars windows cill cooking platform and like including pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external,including demolition of stone slab and tiles of any description or thickness complete all as specified and as directed. complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and lush pipe). Complete all as specified and directed.

S&F in repairs, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed.

Supply and fixing in repairs, wash hand basin vitreous china flat back 450 x 300 mm size white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets to walls complete all as specified and as directed.

S&F in repair stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mm x330mmx200mm, with and including PVC waste pipe and CP waste coupling 32mm and making good to disturbed surfaces, complete all as specified and directed.

S&F 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe

S&F in repairs stop/angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed.

S&F in repairs PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified.

S&F 15mm Stop valve, fancy type, chromium plated with long shunk and cup (cncealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F in repairs Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified.

S&F in repairs bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repairs soap dish, brass chromium plated, complete all as specified and directed.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls, complete all as specified & directed.Make: Finolex/Reliance/Supreme

S&F in repairs 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends with access door of any radius, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single (Single T ) with access door equal or unequal, complete all as specified.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floors including suitable clamps after every one meter of interval, complete all as specified and directed. Make: Finolex/Reliance/Supreme

S&F in repairs 75 mm bore PVC (SWR) bends with access door any radius, complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) junction single (Single T ) with access doore qual or unequal, complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) vent cowl, complete all as specified.

S&F in repair 110mm PVC (SWR) WC connector with lip ring, complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75mm bore of pipes, complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F PVC nahani trap jointing with solvent cement for 75mm bore of pipes, complete all as specified and directed.

S&F in repairs brass chromium plated grating 125mm dia with hole wate, complete all as specified and directed.

S&F in repairs brass chromium plated grating 125mm dia with hole wate, complete all as specified and directed.

Taking up or down GI tubing with all connections and fittings of 15 mm bore complete all as specified and as directed.

Taking up or down GI tubing with all connections and fittings of 20 mm bore complete all as specified and as directed.

M&L for cutting chases in brick or concrete wall, floor, ceiling surface etc for concealed water tubing and making good with pointing in cement mortar 1:3 exc 10cm but not exc. 20cm girth in brick walls etc. complete all as specified.

S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified & directed.

S&F galvanized iron water tubing, ‘medium grade’ 20mm bore, with all fittings such as bend, tee, union etc., fixed complete to floor, walls and ceilings or laid in floors, complete all as specified & directed.

Dismantling water tank of capacity 500 ltr of any type, complete all as specified and directed.

S&F Rotational moulded plythelene white water storage tank tripple layered white coloured, 500 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed.

Supply only integral water proofing compound complete all as specified

M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sq mtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

M&L for galvanized iron spout pipe 40mm dia projecting atleast 20cm clear of wall ‘medium grade’ including making holes in walls & making good disturbed surfaces, complete all as specified & directed.

S&F peg set of six made of stainless steel all as direcred and specified

M&L for mild steel framed work as in doors or ladder of angle or other section like MS tubular hollow section with gusset plates, rails, braces, roller and roller plate etc., complete, drilled for fixing of steel sheeting or other covering. Doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified, steel conforming to Fe-290 Gde-E-165 .

M& L in repirs for 18mm thick solid HDHMR board with 0.9-1.20mm thick sunmica leminated sheet on both side of two different colours (colour finish) as in kitchen cabinet shutter, jointed to form cabinet by means of Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including beddding, providing & fixing of Stainless steel piano hinges suitable for 18/19 mm HDHMR Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), complete all as specified and as directed. Note: (a) Quoted unit Rates are inclusive of PVC board, hinges, screws and adhesive etc. (b) For the purpose of payment area of board alongwith decorative laminated sheet shall be measured.

S&F in repairs HDMR board sheet with 0.9 -1.20 mm thick sun mica laminated sheet both side frame of width 100 mm & HD18 mm thickness made out of extruded 18mm HDMR sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers instruction and specified.

Taking down existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding/ tiles and brick tile/ mud phuska or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish outside the MOD land , complete all as specified and directed.

M&L for PCC (1:2:4), nominal mix, type B-1, using 20mm graded crushed stone aggregate as in PCC padding on surfaces of roof finished even and fair without using extra cement, complete all as specified.

M&L for water proofing treatment with APP based modified 5 layered prefabricated water proofing polymeric memberane over roof consisting of cleaning of concrete or plastered surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed by a tack coat @ 1.2kg per Sqm using 85/25 grade industrial hot blown bitumen over it laid with APP modified polymeric water proofing membrane minimum weighting 3.0 kg per Sqm reinforced with non-woven polyester fabric (weight not less than 170 gm per sqm) unrolled & bonded to substrate with longitudinal and end laps 100mm as per manufacturer's instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.2 kg sqm and as per manufacturer instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5 cm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth with cement mortar 1:4 with WPC @3% by weight of cement where the parapet wall height is 45cm or less no grove will be required as the water proofing treatment will be carried over the top of parapet wall to its full thickness, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on roof surface using water proofing compund as per manufacturer instruction surfaces finished even and fair without using extra cement. complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on above treated surface and joints grouted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement on above treated surface complete all as specified and directed.

same as ditto item no 105, but except in bricks.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish from the premises. complete all as specified and as directed.

M&L for PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate as in coping, benching, complete all as specified & directed.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors all as specified by Engineer-in-charge.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite TreatmentAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified by Engineer-in-charge.

Post construction treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 ltr / hole by drilling 6mm dia. Hole at a down ward angle of 45 degree at 150mm centre to centre snd sealing the same complete all as specified and directed by Engr-In-Charge.

S&F 75mm bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers

S&F magnetic catcher of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple.

Demolition and breaking up drain pipes internal dia 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar incl concrete bedding and haunching, complete all as specified and directed.

M&L for double wall corrugated drain pipe DWCPE (SN8) 230mm (OD)/200 mm (ID) diameter, (ISI marked) drain pipes laid on 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in bed and including haunching of pipe , laid in trenches and tested. complete all as specified and directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or manholes, pier holes, etc. not exc 10 sqm on plan and getting out in soft loose soil complete all as specified and directed.

Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft loose soil, complete all as specified and directed.

Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates)cement concrete in surface and drain complete all as specified and directed.

Cutting holes in brick walls in cement mortar for manhole and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

S&F as in replacement stainless steel plate rack size 900x600x200mm made out of 0.6 mm thick sheet including fixing with rawal plug and screw complete all as specified and directed.

(E/M Part ):-Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type all as specified and as directed.

Dismantling and taking down fluorescent tube light single/double of any wattage or size fitting for repair or replacement of burnt/worn out accessories, complete all as specified and as directed.

Taking down unserviceable sub main wiring of any type/size including wires, conduits/batten etc, complete all as specified and as directed.

Taking down unserviceable DB's box including MCB's of any size/rating, complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volts grade FRLS cable of copper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigid PVC conduit medium grade, ISI marked not less then 20/25 mm dia with all accessories like tee, straight joint, L bend etc concealed in wall , ceiling , floor etc, pressed MS Sunken boxes in wall of required size and colour for switches and sockets, 1.5 sqmm (Nominal size) PVC insulated (green insulation) copper conductor FRLS earth continuity cable drawn with wiring and connected to common earth dolly all as specified for one light point/Ceiling fan/ Ehaust Fan and wall mount fan controlled by one SP switch including making good distrubed surface, complete all as specified and directed. Note :- Cost for MS Sunken Boxes, Hylum sheets are cutting, chieseling and cutting the wall/Ceiling for conduit fixing, making good to existing surfaces (Matching with existing colour) shall deemed to be included in the quoted rate.

All as per Srl item No 126 here-in-before but for one light point controlled by Two, two way switch, complete all as specified and directed.

All as per Srl item No 126 here-in-before but for one bell point controlled by one bell push, complete all as specified and directed.

All as per Srl item No 126 here-in-before but for one 5 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size, complete all as specified and directed.

All as per Srl item No 126 here-in-before but for one 5 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size, complete all as specified and directed.

All as per Srl item No 126 here-in-before but for one power point 6 pin 15 Amps socket out let and Geyser Point for sheet metal enclosure with 2.5 Sq mm stranded copper conductor FRLS cable PVC insulated including earth wire 2.5 Sq mm copper conductor FRLS cable connected to earth dolly complete, all as specified and directed.

All asper item Sl No 126 here in with but for AC Point for sheet metal enclosure with 4 Sq mm stranded copper conductor FRLS cable PVC insulated including earth wire 4 Sq mm copper conductor FRLS cable connected to earth dolly complete, all as specified and directed.

S & F switch piano flush button single pole one way 5 amp 240 volts, all as specified and as directed.

S & F switch piano flush type single pole two way 5 amps 240 volts, all as specified and as directed.

S & F Socket outlet, flush type 2 in 1, 3 pin, 5 amps, 240 volts all as specified and as directed.

S & F switch piano flush button single pole one way 15 amp 240 volts, all as specified and as directed.

S & F Socket outlet 2 in 1, 3 pin, 5 and 15 amps, flush type, 240 volts all as specified and as directed.

S & F bell push switch, single pole, one way flush type, 5 Amps, 240 volts all as specified and as directed.

S&F of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engr-in-Charge.

S&F of bell multi music type, 230 volt AC, single pole, complete, all as specified and as directed by Engr-in-Charge.

S&F of lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed by Engr-in-Charge.

S&F Fan regulator step up type, 120W 230 volts, 50 HZ, AC. Supply complete all as specified and as directed .

S&F of LED bulb 10 watt, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed by Engr-in-Charge.

S&F LED sleek mirror light fitting 10 watt provided with high output diffuser 2 feet, 230 Volts complete LED tube rod 10 watt with all accessories, pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge.

S&F LED bulkhead luminaire 10 watt, wall/surface mounted complete with LED lamp 10 watt, all accessories, pre-wired including providing flexible copper wire, twin core cable PVC insulated sheathed, complete all as specified and directed .

S&F in replacement of LED building security light 30 watt, 230V with lens and toughen glass top.The luminarie should have a color temperature of 6500K, IP 65 complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed.

Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades deposit to store yard for further hanging in its original position or any other position as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service includes cleaning, greasing and oiling, painting of fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed by Engr- in-charge. Note :- Any damage has to be made good by the contractor to make the item functional after testing.

Supply and fix exhaust fan, PVC body AC single Phase. 230V copper winding of size 250mm sweep with, blades, and frame and louvers complete all as specified and as directed

Supply and fix exhaust fan, steel body AC single Phase. 230V copper winding of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed

M&L for cutting openning through brick wall 230mm thick built in cement motar suitable for exhaust fan 250 mm seep including making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all specified and directed.

Taking down existing storage type water heater of any capacity of any type and size by disconnecting from Power socket, carring out necessary repair and painting including cleaning and inner water tank, removing of hard water deposites and connected back and refixing in original position including testing and commissioning complete all as specified and as directed.

Supply and fix ing 15 mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to wall ceiling or laid in floors complete all as specified and directed.

Supply and fixing 15 mm dia bib tap, Chromium plated cast copper alloy with crutch or butter fly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking down after disconnectIon of existing electric meter any make model and type from wall for check /servicing and same position re-fixing complete all as specified and as directed by Engr-in-charge.

M&L for submain wiring with two single core 6.0 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed. Note- (a) The two runs of single core cable and specified earth continuity conductor and PVC conduit with fitting acessories will be measured as one run. (b) Cost of cutting, chasing and make good to existing surfaces are deemed to be including in the quoted rate by the contractor.

S&F in replacement sheet metal enclosures single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volts, complete all as specified and directed.

Supply and Fixing Sheet metal Vertical TPN double door DB 4 Way, 415 Volt, TPN with 200 Amps rated bus bar and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

S&F of MCB SP, 6-32A,10KA, 'C' Curve complete all as specified and as directed .

S&F of MCB SPN, 40 to 63A ,10KA, 'C' Curve complete all as specified and as directed.

S & F in replacement of MCCB four poles,100 Amps, breaking capacity 16 KA, confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

M&L for replacement of Earthing complete for bldg with galvanised mild steel plate electrode, 60cm x 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300mm x 300mm x 300mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320mm x 320mm of RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) reinforced with XPM JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

DIKSHA ENTERPRISES (BID ID -3356793)

M/S SHRI RAM CONSTRUCTIONS (BID ID -3344849)

M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3356963)