Construction of first floor to accommodate Technical section, Records room, Meeting hall for City Sub-division office building and other allied works at Mandya.

Construction of first floor to accommodate Technical section, Records room, Meeting hall for City Sub-division office building and other allied works at Mandya.

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. I-19.2.1 V-2

Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft roc...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works ofbridges, Drain works & other parallel works from 0.50m to 3.50 m...

Beams and Lintels of Buildings I-2.5.2, V-1, BR-6843, @ 60% centering, PN-111

Roof(Straight & Arched) I-2.5.2, V-1, BR-6843, @ 50% centering, PN-111

Chejjas, Canopy & Other Architectural projections of minor sections I-2.5.2, V-1, BR-6843, @ 45% centering, PN-111

Staircase and other similar structures @ 50% centering, PN-111

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation/ Substructure/Superstructure complete as per Drawing and Technical Specifications. (P-18, I-2.11(a))-V1

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band...

Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete ...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

KSRB 4-2.12 Extra for providing throating or drip moulding to RCC, chajja with plastring ( Labour Charges only) as per specifications Specification no KSB (p.15,I-4.21) 2018-19 SR

KSRB15-7 : Providing lime rendering for plastering to wall and ceiling , including cost of materials, labour, curing complete as per specifications (P-115, I-15.33)2018-19 SR

Providing and applying white cement based putty of average thick ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per s...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and laying Vitrified tiles with thickness 9-10 mm in floor withdifferent sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colo...

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Painting with synthetic enamel paint of approved brand and manu facture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appr...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing flush door shutter made out of solid core blockboard type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alrounddoor ...

SS Aldrop 16mm dia, 200mm(P-218,I-22.15.1) V-2

SS Tower Bolts 150x10mm(P-219,I-22.15.5) V-2

Supply and fixing of Door Bush(Market Rate)

SS Door stopper 75mm(P-219,I-22.15.10) V-2

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and office complexes. The til...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polish ing and making curvature (wherever required) and fit...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

Supplying, fixing of display board with logo, the material background should be of aluminium composite panel(ACP) and the words/Logo sould be of sunboard PVC make and coated. with all lead and lift c...

WATERSUPPLY WORKS: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixin...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore(P-117,I-13.4.1) V-2

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement:4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal di...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(P-138,I-14.48b) V-2

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(P-140,I-14.56b) V-2

Providing and fixing Towel rail 450mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(P-144,I-14.88b) V-2

Supply and Fixing of Connection pipe(Market Rate)

Supply and Fixing of Waste pipe(Market Rate)

Supply and Fixing of Taps Stainles Steel(Market Rate)

Supply and Fixing of Health Faucet SS make(Market Rate)

ELECTRICAL WORKS: Supplying heavy gauge PVC conduit pipe confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The condu...

25mmThick V-6, PART-3, I-1.1.2

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.V-6, PART-3, I-1.1.7.1

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using copper PVC insulated multistrand 2X1.5 Sqmm copper wire with a 6 Amps flush type SP control switch shall be fixed...

Medium point above 3 Mtrs Upto 6 Mtrs from tapping point to outlet via switch V-6, PART-3, I-2.1.2

Long point above 6 Mtrs Upto 10 Mtrs from tapping point to outlet via switch V-6, PART-3, I-2.1.3

Supplyingandflushmountingpowdercoated/galvanizedmetalboxsuitableformountingmodularswitchplates.Theboxshouldbefirmlyflush mounted after due groove cutting in Brick/Stone/C.C wall 1-2 WAY V-6, PART-3, I...

Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box V-6, PART-3, I-1.5.1

25mm deep junction box I-1.5.2

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Wiring for lighting/power circuit using one of PVC insulated 1100V grade,multistrand Copper conductor single core cable in open or concealed system of wiring (a) 1.5 Sqmm V-6, PART-3, I-2.3 to 2.3.7

Supplying and fixing of modular switch/socket/stepped electronic regulator/dimmer /telephone socket etc on existing modular switch plate.(P-8;I-18) (a) 6 Amps 3 way socket V-6, PART-3, I-3.6 to 3.6.12

stepped fan regulator

32 Amps DP switch

TV/Telephone Socket

6Amps one way Switch

Supplying of 1440 rpm heavy duty exhaust fan with bracket bladessuitable to operate on 230V 50Hz, AC Supply complete. V-6, PART-3, I-6.2 12" 300mm sweep

Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phaseAC supply conforming to ISS-374- 1979 and with double ball bear...

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and'S' hook made out of 15mm dia MS rod,with5A.ceiling rose of approved quality with necessary length of2 3/0...

Supplyingof LED light fitting 1 x 4' - 36/40 W PVC Batten with integrated LEDtube... .W with high quality diffuser wit hLife of 25000 burning hours & 70 lumenma intenance with CRI

LED modular down light 2'x2' 36 W I-11.6.3 V-6, P-45

Fixing all types and all capacities of 1'x4'/2'x2' LED Light fittings I-13.19, V-6, PART-3

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the mter board using 40mm dia 2.90mm thick GI pipe 2.5metr long buried in a pit. The pit should ...

KSRB 10-3 : Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc., consisting of following ap...