REPAIR TO FALSE CEILING ALUMINIUM JOINERY AND CLEANING OF VEGETATION ON WALL ROOFS IN ZONE A AREA INCLUDING CERTAIN ELECTRICAL WORKS UNDER GE I GOS

Amount

M&L for cutting and removing wild bushes/ vegetation, etc at bldgs above the 2m height from GL and depositing surplus spoil/ rubbish exc 100M but n.exc 500 M complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs /blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 12 mm thick plain Gypsum Board false ceiling with GI frame including all necessary drilling cutting to fix electric items complete all as specified and directed with following:- (a) GI Grid channel 30x25x20 mm of 24 gauge fixed with rawl plug and screw 450 mm centre to centre alongwith perimeter walls. (b) GI channel made to shape 50x40x40 mm of 24 gauge placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10 mm of 24 gauge fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide and 20 mm gauge suspended fixed with steel fastner to roof ceiling and 1200 mm centre to centre including pluging of RCC Slab. (e) 12 mm thick gypsum board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.0 Sqm each complete all as specified and directed.

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.

S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick tinted glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed.

Supply and fix street light fitting LED type of 72 watt New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic dirver complete all as specified and as directed Make : Surya/Havells/C&S

Supply and fix street light fitting LED type of 60 watt New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic dirver complete all as specified and as directed. Make : Surya/Havells/C&S

Supply and fix street light fitting LED type of 45 watt New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic dirver complete all as specified and as directed. Make : Surya/Havells/C&S

Supply and fix street light fitting LED type of 30 watt New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic dirver complete all as specified and as directed. Make : Surya/Havells/C&S

Supply and fix street light fitting LED type of 25 watt New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic dirver complete all as specified and as directed. Make : Surya/Havells/C&S

M&L in replacement of LED flood lights of cap 120 W cap D-clamp fitting of powder coatedpressure die cast aluminium High power LED with heat resistant toughed glass with connected accessories complete all as specifed and as directed. Make : Surya/Havells/C&S

Supply and fix post-top lantern 40 watt energy saving, environmental friendly, long life aesthetically designed with IP 66 symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed. Make : Surya/Havells/C&S

Supply and fix post-top lantern 30 watt energy saving, environmental friendly, long life aesthetically designed with IP 66 symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed Make : Surya/Havells/C&S

Supply and fix in replacement of Timer panel, made of MS Enclosure factory made consisting digital timer 24 hour set up with contactor rating65 Amps TP of max load 12 KW complete with fixing arrangemetns on MS Channel of suitable size and necessary PCC Wk all as specified and as directed.

M&L for taking down the motorised / manual High Mast Lights circular grid accomodating MH/MV/LED light fittings any cap over a ht of 15 mtr to the ground, taking aside, replacing the unsv control gears/ light fittings with LED fixtures and raising back to its original position upto 15 mtr etc complete all as specified and as directed (Rates quoted shall be incl of replacing required accessories where specifically not mentioned but required to complete the Job except LED fixtures)

S & F in replacement of direct type LED retrofit lamp in street light fittings 30 watt 2500 lumen output, 6500 K colour temp complete all as specified and directed . Make : C&S / Havells/ HPL/ Sysca

S&F in replacement Anologue electro mechanical timer 24 hrs minimum setting 30 minutes for daily working contact rating 16 Amps, 240 Volts, AC with initial charging, battery backup having supply reserve failure complete all as specified and directed Make : C&S / Havells/ HPL/ Sysca

Supply and fix in replacement of automatic modular contactor with manual override , 40 Amps 3P 50HZ suitable for timer switch of street light complete all as specified and directed Make : C&S / Havells/ HPL/ Sysca

Surface dressing n.exc 30 cm deep and average 15 cm deep and getting out in any type of soil around the timer/ elect panel bds complete all as specified and directed.

All as per item above but of size 40MM bore complete all as specified and directed.

Boring of holes horizontally for laying of less than 40mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve including taking out existing unserviceable cable complete all as specified and directed for cable size 10 sqmm x 2.0 core Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items ( Make:- Havells / polycab / cci / nicco / Gloster)

All as per item No. 27 above but for 16 sqmm x 2.0 core

All as per item No. 27 sbove but for 16 sqmm x 4.0 core

All as per item No. 27 above but for 25 x 3.5 core

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts and washers made out of GI/steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board/switch board/control board all shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc complete all as specified and directed

S & Fix in replacement of PVC cable aluminium stranded conductor 1100V grade 10 sqmm x 2.0 core complete all as specified & directed.

S&F in replacement of Old unsv cable loop box with PVC box of size 280 x 170 x 130mm incl 6 amps MCB fixed on pole incl necessary clamps, bolts, nuts complee all as specified and directed (Syntex/hensel)

M&L for writing of numbers and words (not more than 10 characters) on existing steel / PCC poles with synthetic enamelled paint of any size in 30 cm wide strips alternatively black and white on existing surface including white washing on PCC coping of poles complete all as specified and directed.

Supply and fixing in replacement MCCB fixed type 4 pole 415 volts of capacity 400 amps 50 KA complete all as specified and directed Make : HPL/ C&S/ Havells

Supply and fixing in replacement MCCB fixed type 4 pole 415 volts of capacity 315 amps 36 KA complete all as specified and directed Make : HPL/ C&S/ Havells

Supply and fixing in replacement MCCB fixed type 4 pole 415 volts of capacity 250 amps 36 KA complete all as specified and directed Make : HPL/ C&S/ Havells

Supply and fixing in replacement MCCB fixed type 4 pole 415 volts of capacity 200 amps 36 KAcomplete all as specified and directed Make : HPL/ C&S/ Havells

Supply and fixing in replacement MCCB fixed type 4 pole 415 volts of capacity 160 amps 25 KAcomplete all as specified and directed Make : HPL/ C&S/ Havells

Supply and fixing in replacement MCCB fixed type 4 pole 415 volts of capacity 100 amps 16 KA complete all as specified and directed Make : HPL/ C&S/ Havells

Supply and fixing in replacement MCCB fixed type 4 pole 415 volts of capacity 63 amps 25KA complete all as specified and directed Make : HPL/ C&S/ Havells

Supply and fixing in replacement On load change-over switch 4 pole 415 volts of capacity 100amps with enclosure complete all as specified and directed Make: Standard/ Havells/ Indo-asian/Legrand/HPL

Supply and fixing in replacement off load change-over switch 4 pole 415 volts of capacity 200amps with enclosure all as specified and directed. Make: Standard/ Havells/ Indo-asian/Legrand/HPL

Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out for taking out / laying of cable complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and fix Double wall corrugated HDPE pipe 40 mm outer dia for protection of UG cable complete all as specified and directed

Supply and fix Double wall corrugated HDPE pipe 50 mm outer dia for protection of UG cable complete all as specified and directed

Prunning of tree not exc 10mm girth including cutting of trunk branbches & stacking of servicerable meterial and disposal of UNSV materials to a disatnce not exc 50 mtrs & clearing site complete all as specified and directed

Prunning tree not exc 15mm girth including cutting of trunk branbches & stacking of servicerable meterial and disposal of UNSV materials to a disatnce not exc 50 mtrs & clearing site complete all as specified and directed

Preparing external/internal surfaces of the panel boards/Feeder pillar boxes , consoles etc by scrubbing /CTC by emary paper by removing stains/rusted scales etc and applying two coats of synthetic enamel paint complete and cleaning the carbon in cables meters/indicators etccomplete all as specified and directed

S & Fix in replacement of flat /round 3 core copper conductor PVC insulated & PVC Sheathed cable , 1100V grade complete all as specified & directed (Havells/RR KABEL/HPL/Anchor)

Supply & fix PVC conduit pipe 20mm dia with fixing arrangement with flat iron with nut bolts on pole complete all as specified & directed.

M&L for painting of LT steel tubular pole swaged/steel /Swan neck poles of 9/11 mtr height with and including cross arms, MS clamps nuts, bolts, height from 1.5 mtr from coping to top of pole including preparation of iron surface and applying with single coat of aluminium paint on existing surface complete all as specified and directed.

M&L for painting of LT pole PCC/RCC poles of 9 mtr height with and including cross arms, MS clamps nuts, bolts, height from 1.5 mtr from coping to top of pole including preparation of iron surface and applying with single coat of aluminium paint on existing surface complete all as specified and directed.

MM ENGINEERING SYSTEMS

M/S. KISHAN ENGINEERING

M/s Bapujee Builders and Traders

M/S SPECTRUM INFRASTRUCTURE DEVELOPMENT PVT LTD

R J ENTERPRISES

HARAGOURI SUPPLIERS

M/s MAA BHAIRABI ENTERPRISES